Acceptance criteria for visual defects of electronic components

R

rameshs_10377

#1
Hi

i m an in charge for inward good inspection in electronic manufacturing industry ,

i have a few problem while accepting the components, i m unable to fix the acceptance criteria for visual inspection for electronic component

eg: we received the ceramic disc capacitor where the powder coating near lead got damaged during forming of lead . , these components used for medical project

i know there is no harm to performance of the component but i could not able to convince our production team with our proof

Please help me to sort out this issue by providing the acceptance criteria for visual defects :mad:

Requirement of AS9100 and 13485

Please help

ramesh:bonk:
 
Elsmar Forum Sponsor

harry

Super Moderator
#2
Please help me to sort out this issue by providing the acceptance criteria for visual defects
So you want us, people who do not know anything about your product, what market segment you served, which/what clients you served and what product you manufacture to provide acceptance criteria to you for something very subjective? Doesn't make sense isn't?

Such criterias should normally come from your customer. If not then you need to set one yourself (within your organization) - make sure you do it in consultation with people who are experienced enough to know the market in general as well as what others are doing.

If you already had one, do you have customer complains on this issue? If so, you may need to tighten. If not, why do you need to change it since you mentioned that it does not affect performance.
 
J

JaneB

#3
Rameshs,

Find a couple of people to work with you on this. THey need experience & especially must know what 'good' things should look like and what 'bad things' might look like.

Go through a number of items (eg, stuff already accepted), and get them to talk aloud about what makes each thing/s 'good/OK to accept'. You may need to ask them specific questions to prompt them.

Once you've got that list of criteria, then turn attention to the opposite. Ask them to give you examples / identify 'bad ones' that should not be accepted or that require review.

One good way to do this may be to take pictures (digital cameras make this easy) and use them as illustrative examples (eg, post on wall in inspection place). If/next time something is accepted that shouldn't have been, find out why and add that to the pics/list.

It will take you a little while, but you need to develop these criteria internally. Plus it gets people involved, which is always a good thing.
 
R

rameshs_10377

#4
Dear Jane

Thanks for your inputs , it helped me to proceed further in problem solving

thanks a lot

regards

ramesh
 
J

JaneB

#5
Rameshs,
You're welcome. Don't ignore customer perception either as Harry points out.

Even if something doesn't affect performance (I don't know what, because I don't know the product, but suppose it was fine scratches on what's normally a smooth surface), if your customers don't like the look, & thus get a perception that what you produce 'isn't good' - even if it works perfectly, they'll not be happy.
 
Thread starter Similar threads Forum Replies Date
K Visual inspection and acceptance criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
R Visual Acceptance Criteria for Porosity in Ferrous Castings Manufacturing and Related Processes 4
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M V&V phase: Justification of acceptance criteria (statistical method ) - (Medical Device) Design and Development of Products and Processes 2
O GR&R Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
S Shore A hardness Tester Acceptance Criteria Standard Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
lanley liao Purchase Acceptance Criteria - Tensile testing Oil and Gas Industry Standards and Regulations 2
R Procedure, Frequency and Acceptance Criteria for Replicate, Recalibration, Before-After and Intermediate Checks ISO 17025 related Discussions 8
S Acceptance criteria for gauges General Measurement Device and Calibration Topics 8
M Characterization Testing - NO acceptance criteria, no minimum performance requirement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J AIAG PPAP: 2.2.11.3 Acceptance Criteria for Initial Study (page 9, 4th edition) APQP and PPAP 1
C FDA on changing acceptance criteria re: analytical method validation US Food and Drug Administration (FDA) 1
B IATF 16949 Cl. 8.6.6 - Acceptance Criteria - Zero Defects Attribute Data Sampling IATF 16949 - Automotive Quality Systems Standard 2
P Medical Device Validation Protocols and Reports - Acceptance Criteria Other Medical Device and Orthopedic Related Topics 3
C Software Unit Acceptance Criteria (5.5.4) IEC 62304 - Medical Device Software Life Cycle Processes 3
J Acceptance Criteria in 8.1.1 e) of IATF 16949 IATF 16949 - Automotive Quality Systems Standard 2
O Acceptance criteria bacterial endotoxins immunosera for human use Manufacturing and Related Processes 3
I As a part of validation, should i include the acceptance criteria of CPk index >1.33? Qualification and Validation (including 21 CFR Part 11) 4
V Acceptance Criteria Gage R&R - Simple vs Complex Techniques Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
A 5.5.3 - Software Unit Acceptance Criteria (Risk Control Measures) IEC 62304 - Medical Device Software Life Cycle Processes 3
M Establishment of Acceptance Criteria for a Weigh Balance General Measurement Device and Calibration Topics 3
X How to define Calibration Acceptance Criteria General Measurement Device and Calibration Topics 3
P Gage R (no reproducibility) - Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
V Validation Test and Acceptance Criteria for Compressed Air Qualification and Validation (including 21 CFR Part 11) 3
I Dual Acceptance Criteria: Cpk and Individual Values Statistical Analysis Tools, Techniques and SPC 3
L Acceptance Criteria for External Calibrated Standards IATF 16949 - Automotive Quality Systems Standard 1
A Risk Acceptance Criteria in ISO 14971 ISO 14971 - Medical Device Risk Management 19
G Acceptance Criteria when Verifying a Gauge General Measurement Device and Calibration Topics 2
D Renault Painting Defect Acceptance Criteria Manufacturing and Related Processes 4
B Surface Roughness Tester Acceptance Criteria Calibration Frequency (Interval) 4
H Package Integrity Testing Acceptance Criteria ISO 13485:2016 - Medical Device Quality Management Systems 3
D 21 CFR 820.80 In-Process Acceptance Criteria requirements for IVDs 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
S Acceptance Criteria for Scratches on Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 3
JoCam Nadcap AC7120 (Audit Criteria for Circuit Card Assemblies) - Acceptance Criteria AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A Acceptance Criteria - ISO 9001:2008 Clause 8.2.4 - Questionable Audit Finding? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 40
Q How to meet Clause 7.1.2 Acceptance Criteria in ISO TS 16949 IATF 16949 - Automotive Quality Systems Standard 7
J IPC-A-610 E Thermal Plane Acceptance Criteria for D-Pak Component Other ISO and International Standards and European Regulations 2
S Acceptance Criteria at Design Verification Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Labels - ASTM D3330/D3330M Acceptance Criteria for Adhesion 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
optomist1 Tensile Test Crimped Electrical Terminal Acceptance Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
V The approach/criteria of setting Acceptance Limits Method Validation Parameters Statistical Analysis Tools, Techniques and SPC 1
6 Acceptance Criteria For pH Meters and other Laboratory Equipment Measurement Uncertainty (MU) 16
V How to define Risk Acceptance Criteria? ISO 13485:2016 - Medical Device Quality Management Systems 3
Rameshwar25 Acceptance Criteria for Attribute MSA Study Effectiveness Summary Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
D What are API Equipment Cleaning Requirements and Acceptance Criteria? US Food and Drug Administration (FDA) 3
V How are the Acceptance Criteria for Content Uniformity & Dissolution Superior? Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 2
Q Sampling Plan Acceptance Criteria - ISO TS 16949 Clause 7.1.2 IATF 16949 - Automotive Quality Systems Standard 8
1 Acceptance criteria and related standard for 1 micron Lever Type dial Indicator General Measurement Device and Calibration Topics 5
M Acceptance Criteria for Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5

Similar threads

Top Bottom