Acceptance sampling inspection plan compliant to Boeing X31764

Mike S.

Happy to be Alive
Trusted Information Resource
#1
Has anyone created an acceptance sampling inspection plan compliant to Boeing X31764? The part where they require “minimum protection levels meeting ARP9013 Figure B1” would mean a huge increase in sampling, and thus cost, for us. I think it is overkill. Has anyone found a way around it?
 
Elsmar Forum Sponsor
A

andygr

#2
Re: Boeing Sampling Plan

If involked contractualy there is no skirting the requirement.
As boeing covered in their training presentation on page 36 there is no out unless you have coverage under released engineering.
The only thing that can help is use the switching rules to reduce.
:2cents:
 

Mike S.

Happy to be Alive
Trusted Information Resource
#3
Re: Boeing Sampling Plan

If involked contractualy there is no skirting the requirement.
As boeing covered in their training presentation on page 36 there is no out unless you have coverage under released engineering.
The only thing that can help is use the switching rules to reduce.
:2cents:
I was afraid of that.

Did this requirement significantly impact your sampling compared to the level you were doing prior to this?

Are you commercial only (BCA) or IDS as well?
 
Thread starter Similar threads Forum Replies Date
P Lot Acceptance Plan that specifies BS 6001 Double Sampling Plans, general inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
C Incoming Inspection Acceptance Sampling by Variables and Minitab Quality Tools, Improvement and Analysis 1
C Acceptance Sampling is Better Than 100% Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
Marc MIL-STD-1916 "Acceptance on Zero (AOZ) Sampling Inspection" Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
B IATF 16949 Cl. 8.6.6 - Acceptance Criteria - Zero Defects Attribute Data Sampling IATF 16949 - Automotive Quality Systems Standard 2
V Application and differences of OC Curve and Acceptance Sampling Statistical Analysis Tools, Techniques and SPC 2
L Choosing the correct Distribution for Acceptance Sampling Inspection, Prints (Drawings), Testing, Sampling and Related Topics 19
R Long Range OC Curves - Acceptance Sampling Switching Rules Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
kedarg6500 Acceptance Sampling Plan for Variables - Product Performance Testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
R Results: Monte Carlo Simulation of Acceptance Sampling Plan AQL - Acceptable Quality Level 3
A Acceptance Sampling question (Is there an approach) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
U Online Acceptance Sampling Calculators other than "sqconline" Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
V Are there Acceptance Limits for Sampling Error? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
V C=0 Zero Acceptance Number Sampling Plan - Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M c=0 Acceptance Sampling Plan similar to the N. Squeglia version Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A Acceptance Sampling Plan for a car manufacturing company Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
Q Sampling Plan Acceptance Criteria - ISO TS 16949 Clause 7.1.2 IATF 16949 - Automotive Quality Systems Standard 8
R Zero Acceptance Sampling Plans 5th edition by Squeglia - Question Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
apestate Acceptance Sampling - Interpretation of "Lot" - DOD DCMA Inspector coming Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
M Zero Acceptance Number Sampling Plans for Isolated Lots Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
J Acceptance Sampling for Bulk Materials - Anyone knowledgeable about ISO 10725? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
N Customized sampling plan - Acceptance sampling plan for the raw materials Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
P Zero Acceptance Number Sampling Plans, Fifth Edition (e-Book) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Acceptance Sampling Methodologies Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
K Design of Lot Acceptance Sampling Plan - Zero Acceptance Number Sampling Plans Inspection, Prints (Drawings), Testing, Sampling and Related Topics 27
C Acceptance sampling should never be used for processes in statistical control Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
Marc Zero Acceptance Number Sampling Plan - C=0 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
D Zero Acceptance Sampling - Is anyone is actually using this? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
P Zero Acceptance Sampling Plan By N.L. Squeglia Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
Marc Acceptance Sampling - Definition Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
G Has anyone heard of the Squeglia Zero (c=0) Acceptance Sampling Plan? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
M Where to find an acceptance sampling excel macro or .xls template? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
Marc Acceptance Sampling - A brief powerpoint .ppt presentation Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
Govind SPC and Acceptance Sampling - Is Acceptance Sampling Obsolete? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
E Acceptance Sampling to be used for Lot Acceptance - Destructive Test Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
U Zero Acceptance number procedure for Attribute Sampling Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
R AS9003 Clause 4.20.2 - Customer-approved acceptance sampling plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Acceptance Criteria for Attribute Data Sampling Plans shall be Zero Defects Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
D QS-9000 3rd Edition Acceptance Sampling - Reduces RI (Return on Investment) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
U Calculate acceptance of equipment reading after calibration General Measurement Device and Calibration Topics 2
U Calculate acceptance of calibration reading Measurement Uncertainty (MU) 1
V 510 k submission RTA (Acceptance Checklist ) Other US Medical Device Regulations 8
H Medical Device Label Acceptance Criteria Manufacturing and Related Processes 4
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
L Gage R&R TMV Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M V&V phase: Justification of acceptance criteria (statistical method ) - (Medical Device) Design and Development of Products and Processes 2
K How can Acceptance Number and Reject Number be larger than Sample Size on Z1.4 Table? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
O GR&R Acceptance Criteria Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
S Shore A hardness Tester Acceptance Criteria Standard Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
lanley liao Purchase Acceptance Criteria - Tensile testing Oil and Gas Industry Standards and Regulations 2

Similar threads

Top Bottom