Alan Miner's Measurement Systems Analysis (MSA) Blog Article Series

Marc

Hunkered Down for the Duration
Staff member
Admin
#1
Elsmar Forum Sponsor
E

elgoramonov

#4
Dear Marc,

I am elgo from Indonesia, I work in tire industri, now I will do MSA for laboratorium equipments, but still confusion about approriate
 

harry

Super Moderator
#5

Marc

Hunkered Down for the Duration
Staff member
Admin
#7
<snip> The only links that work for me though are part's 3-5b. The rest take me to an error box telling me to search for them again.
If you find a link that doesn't work, Please use the "Report" button on the post and report the problem and give as may details as you can. That is the only way we can check links in the post.

We need a Report and some details of the problem you are experiencing.

I have personally checked all links and have experienced no errors.

What browser and OS are you using?
 

howste

Thaumaturge
Super Moderator
#9
OK folks, try the links now... They should also work if you are logged out or are logged in.

Please let me know by replying here if they now work for you when they didn't before, or let me know if any are still not working.

If you go to Imported Legacy Blogs you should see Miner's blog posts.
They all work for me now whether I'm logged in or not. :agree1:

EDIT ADD: First post in thread updated because of the software change. Dead link Iin this post replaced.
 
Last edited by a moderator:

Marc

Hunkered Down for the Duration
Staff member
Admin
#10
Links in the first post have been removed and replaced with a single cumulative link because of the software change. The link I put in will list all of Miner's MSA "Legacy Blog" entries.
 
Last edited:
Thread starter Similar threads Forum Replies Date
A Operational Risk Management - In Memory of Alan Cotterell - A Focused Individual ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
BradM Miner hits Silver Status Covegratulations 18
K Software Validation for Measurement Tools used in Process Validation ISO 13485:2016 - Medical Device Quality Management Systems 2
K Best Measurement Systems Demos in California? General Measurement Device and Calibration Topics 1
M Measurement Error - How to determine what is acceptable? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Process Mapping - Inputs/Outputs/Detail Activities/Control points/Measurement? Process Maps, Process Mapping and Turtle Diagrams 4
B IEC 60601-2-10 - Accuracy of Pulse Parameters - Required Measurement Uncertainty IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
N Program or application for standard time measurement in industry from video surveillance? Human Factors and Ergonomics in Engineering 1
M Defining frequency of measurement tools callibration Calibration and Metrology Software and Hardware 3
T How to “validate/qualify” a new measurement equipment? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Bev D Verification and Validation of Measurement Systems Misc. Quality Assurance and Business Systems Related Topics 0
F How do you add accuracies for tools with different measurement devices? General Measurement Device and Calibration Topics 1
M Viable count Measurement ISO Standard Other Medical Device Related Standards 1
J Gauge R&R on a torque measurement Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
W Air Quality Measurement Hardware and Software General Measurement Device and Calibration Topics 11
O Dimension Measurement Tool Recommendation General Measurement Device and Calibration Topics 21
G Does pitch/increment/resolution of a ruled scale apply to measurement uncertainty as line item? Measurement Uncertainty (MU) 10
Marco Bernardi Plane measurement with a 3D touch machine like a CMM. Calibration and Metrology Software and Hardware 3
Marco Bernardi Diameters measurement with 3D touch machine like a CMM Calibration and Metrology Software and Hardware 4
R Uncertainty in measurement larger than tolerance Measurement Uncertainty (MU) 2
R Measurement Uncertainties Budget for Thermometer Measurement Uncertainty (MU) 6
O Performance Measurement ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
O Monitoring performance - How do I determine performance measurement basis within my organization? Misc. Quality Assurance and Business Systems Related Topics 4
G What information to put on measurement Dimensional Results APQP and PPAP 7
D O Ring capability and measurement - What is the automotive 'norm' for capability studies on O Rings? General Measurement Device and Calibration Topics 3
F Electrical Metrology (Source/Generation and Measurement) General Measurement Device and Calibration Topics 1
G Gauge R&R on multiple dimensions using 3D measurement system Capability, Accuracy and Stability - Processes, Machines, etc. 6
F Measurement Audit and ILC for ISO 17025 Clause 7.7.2 - Comparison with results of other laboratories ISO 17025 related Discussions 0
Emran.mi Measurement system analysis - Can you help me about implementation MSA for CMM device Manufacturing and Related Processes 2
K ISO 17025:2017 clause 7.6.2 - Performing calibration of its own equipment shall evaluate the measurement uncertainty ISO 17025 related Discussions 6
Q How should I analyze measurement correlation between me and customer? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
I Determining Calibration Tolerance of a Measurement Device General Measurement Device and Calibration Topics 2
Fernando Drumond Calibration and Control of Plastic Volumetric Measurement Instruments General Measurement Device and Calibration Topics 1
M Measurement Unit Rounding Nonconformity - Notified Body Audit Registrars and Notified Bodies 6
Q ISO 9001 Clause 9.1 - Monitoring measurement analysis and evaluation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
Q Gage R&R for Instant Measurement Machine Manufacturing and Related Processes 6
N Justifications for not performing MSA (Measurement System Analysis) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
T ISO 13485 8.2.5. Monitoring and measurement of quality management system processes ISO 13485:2016 - Medical Device Quality Management Systems 1
A Records required for ISO 9001 clause 7.1.5.1 - Fitness for purpose of the monitoring and measurement resources ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Ron Rompen Measurement Method Challenge - Measure feature #91 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
T MSE for dynamic balance measurement? Manufacturing and Related Processes 1
R Pls help --- Need expert advice on Video Measurement Measurement Uncertainty (MU) 0
R Measurement - Center Points not taken into account Using Minitab Software 3
B True Position Measurement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
G Reporting measurement uncertainty for custom items Measurement Uncertainty (MU) 2
F ≥5 micron macroparticles measurement in Laminar Airflow (LAF) bench (ISO Class 5) Miscellaneous Environmental Standards and EMS Related Discussions 0
S Measurement Terms - How do I say this in Inches? General Measurement Device and Calibration Topics 5
Marc Definition MPEE - Maximum Permissible Error for Length Measurement Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
M Leakage current measurement with non-frequency-weighted device IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
K Measurement Uncertainty Budget (MU) of for Ultrasonic Thickness gauge Measurement Uncertainty (MU) 1
Similar threads


















































Top Bottom