Algorithm to Detect flaw and burr on print characters

A

anhnha

#1
Hi,
I am thinking about an algorithm for checking flaw and burr on print characters but still gets stuck.
The attached image illustrating of flaw on characters.

Could you suggest some algorithms for detecting flaw and burr on print characters?
I tried image subtraction but that doesn't work because of some problems.

1. This method requires two images are extremely exact in position.
2. Some print characters (without burr and flaw) are thinner or thicker than
the reference image.

For these reasons, that method can't apply.
 

Attachments

Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
S What is considered a "core algorithm"? (From an FDA guidance document) Medical Information Technology, Medical Software and Health Informatics 4
J General Motors SSE Launch Algorithm - SCMS's Service Industry Specific Topics 0
optomist1 AFMEA - Algorithm FMEA FMEA and Control Plans 3
F CE Marking Algorithm for an IVD use only Medical Device EU Medical Device Regulations 7
Marc Google "Hummingbird" Search Algorithm Announced - Sept 2013 After Work and Weekend Discussion Topics 1
Marc Mozcast - Turbulence in the Google search engine algorithm After Work and Weekend Discussion Topics 0
michellemmm Algorithm check for accuracy Software Quality Assurance 3
Marc Understanding Google's "Caffeine" Update and the Mayday algorithm changes World News 0
C Generalized Variance Chart - Formulas and Algorithm in Minitab Using Minitab Software 3
A Calibration Interval (Frequency) Adjustment using Hilliard type 2 algorithm Calibration Frequency (Interval) 11
D Yates Algorithm as it applies to DOx or Regression Statistical Analysis Tools, Techniques and SPC 2
B To detect the non standard variable IATF 16949 - Automotive Quality Systems Standard 5
C Customer Requirement to Detect and Preclude use of Counterfeit & Used Parts Customer and Company Specific Requirements 4
P Process Stability & Sampling - Can Sampling detect an Unstable Process? AQL - Acceptable Quality Level 10
Q Semiconductor Inductor Failure - Will HAAS/HALT or any other test detect it? Manufacturing and Related Processes 4
R My C=0 sampling failed to detect parts are out of round Inspection, Prints (Drawings), Testing, Sampling and Related Topics 20
K Difference a gage can detect - Similar Parts Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 16
S How to Detect Common & Special Cause(s) of Variation in a System? Statistical Analysis Tools, Techniques and SPC 12
A SPC for Labels - Detect dot, misaligned, color differences, etc Statistical Analysis Tools, Techniques and SPC 3
K Sampling plan to detect defective units - Given N=6000, PPM=500 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 20
J 8-D for mislabels - How to prevent, or at least detect, mislabels Nonconformance and Corrective Action 4
Z Dial Test Indicator Flaw General Measurement Device and Calibration Topics 7
C PDF Flaw In Internet Explorer After Work and Weekend Discussion Topics 2
Marc Trojan hits unpatched Microsoft Word flaw - Affects Word XP and Word 2003 After Work and Weekend Discussion Topics 4
T Major Flaw in Quality Standards Philosophy, Gurus, Innovation and Evolution 31
Marc Exploit for "extremely critical" IE (MicroSoft's Internet Explorer) flaw After Work and Weekend Discussion Topics 9
Marc FDA begins inquiry on Guidant defibrillator flaw World News 1

Similar threads

Top Bottom