ANSI-RAB NAP (Registrar Accreditation Board) Registrar Suspensions

Sidney Vianna

Post Responsibly
Staff member
Admin
#1
cracking the whip?

Interesting to see that some Registrars have had some accreditations (partially) suspended by the ANSI-RAB NAP.

To find it, do a search in the QMS registrar directory maintained by the RAB
 
Elsmar Forum Sponsor

JodiB

Still plugging along
#2
Interesting indeed.

1)It looks like RAB has reversed its stance on not making suspensions public. About time.
2) Also appears that RAB is willing to suspend accreditation under some circumstances. Maybe not in enough cases, but at least it's a beginning.
 
S

Sirlard

#3
Help I don't see what you two do. I went to the site but came up empty handed. Could you please give a better map of where I need to go? Thank you.
 

gpainter

Quite Involved in Discussions
#4
Go to the list of registrars, then go down just past the IAF scope categories and it will tell you. American Global Standards and and the last is Perry Johnson!!!!!!! I believe there are five. If you go to the news letter for winter 2003 on page 4, I believe, it will tell you various reasons for withdrawls or suspensions.
 

Mike S.

Happy to be Alive
Trusted Information Resource
#5
Maybe you can provide a direct link to what you're reading. I Googled around a bit and came up with this:

From the PJI website: "Is there a clear division of responsibilities between registration and consulting?
As a registrar, Perry Johnson Registrars does not engage in any consulting. There is a company with a similar name, Perry Johnson, Inc., that does provide training and consulting services. The two companies are completely separate operations, but share a common owner, not unlike many of our competitors. Every step has been taken to ensure audit independence and impartiality. These steps have been reviewed and approved by official accrediting bodies worldwide (i.e., RvA, RAB, TGA, DAR, UKAS, JAB and INMETRO)"

From the RAB site when looking for a QMS registrar:
The following registrars have been accredited (unless noted as an applicant) in the National Accreditation Program, a joint program of the American National Standards Institute (ANSI) and the Registrar Accreditation Board (RAB).

Perry Johnson Registrars, Inc.
Terry Boboige
26555 Evergreen Road
Suite 1340
Southfield MI 48076
United States
Phone : 800-800-7910
Fax : 248-358-0882
Other qualifications :
AS9000
AS9100
QS-9000
QS-9000 TE Supplement
TL 9000

Effective 24 March 2003 PJR's ANSI-RAB NAP AS9100 Accreditation has been suspended. While suspended PJR will not be able to issue any new ANSI-RAB NAP AS9100 accredited certificates.
 
A

Al Dyer

#7
I have peace now!

I have dealt with and disparaged PJ for years now (as many others have) and now have the pleasure of knowing that a past employer has finally found that they cannot buy the certificate forever. I feel I have been vindicated, at least in my own mind.

Seriously though, I hope the RAB and others will continue to act as they should and take complaints seriously and really investigate some of these registrars, but don't forget that there are AUDITORS that are involved in the process. These auditors are the ones we should be wary of and investigating.:biglaugh:
 
A

Al Dyer

#8
By the way, I have met Perry on a few occasions and he is one smooth operator and very rich. He lives about 20 miles from me in a very nice ESTATE.
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#9
Law & Order

For those of you who have access to Quality Systems Update publication, don't miss this month's issue. They have an article concerning a law suit brought on to the ANSI-RAB by a registrar mentioned in this thread.

The case was settled out of court, according to the article.

Due to copyright issues, I can not post the article here . . .

Their website is www.qsuonline.com, but the article is only available online for subscribers.
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#10
dynamic content

According to the RAB website data, all ANSI-RAB NAP accredited Registrars have a "clean bill of health". No partial suspensions listed anymore.
 
Thread starter Similar threads Forum Replies Date
Sidney Vianna ANAB Accreditation - ANSI-RAB NAP ceases to exist 1/1/05 (ISO/IEC 17011 and the IAF) ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 10
A ANSI/AAMI versions of 60601-1-2 and related testing requirements Other Medical Device Related Standards 0
S Is using ANSI/ASQ Z1.4-2008 the correct sampling plan to determine Pass/Fail of Apparel measurements? AQL - Acceptable Quality Level 4
B FAI and ANSI Y14.5 Trailing Zeros and Print Tolerances Manufacturing and Related Processes 3
Nicole Desouza Sampling plan for a customer who wants AQL 1.0 (per ANSI Z1.4) AQL - Acceptable Quality Level 5
Q ASQ/ANSI Z1.4–2003 (R2018) Change Log? Various Other Specifications, Standards, and related Requirements 2
S Medical Device Endotoxin Testing for ANSI/AAMI ST72:2011/2016 Other Medical Device Related Standards 1
Sidney Vianna ANSI acquires full ownership of ANAB - December 2018 ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 0
C AS9100 rev D 8.5.1 c 2 - Defining the Machine in-process frequency per ANSI/ASQ Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
Proud Liberal Surface finish measurement (roughness) - Rz under the ISO standard vs ANSI standard Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
M Which Version of 60601-1 to Purchase (IEC, EN, ANSI...)? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
L AQL ANSI z1.4 & z1.9 - What are the differences between these 2 standards? AQL - Acceptable Quality Level 5
J Can ANSI Z1.4 sampling plan be used for sampling alone without the Acc/Rej criteria? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M AAMI/ANSI 11135-1:2007, EO Sterilization Other US Medical Device Regulations 8
N Database (Like ASSIST) to subscribe to & have access to new SAE-AS & ANSI standards Various Other Specifications, Standards, and related Requirements 2
E Cleaning Validations for Reusable Products - ANSI/AAMI TIR30:2011 Requirements Other Medical Device Related Standards 3
V Locking in a Standards Version (ANSI Z1.4) Statistical Analysis Tools, Techniques and SPC 1
K Can I use ANSI/AQL for the Total Number of Containers for the entire Lot? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
G Where to find the ANSI Z1.9 Rosetta Stone Capability, Accuracy and Stability - Processes, Machines, etc. 9
F ANSI ASQ Z1.4 - Is the following process acceptable? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
AshleyE Calibration system must meet ISO 10012, ISO 17025 or ANSI/NCSL Z540? ISO 17025 related Discussions 38
M What Preceded ANSI/ASME Y14.5? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M GD&T (ANSI Y14.5) Perpendicularity Callouts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M ANSI/ASME B1.2 Revision Changes from the 2001 version Various Other Specifications, Standards, and related Requirements 1
WCHorn AS9100 and Sampling - ANSI ASQ Z1.4 C=0 Conflict AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
S Using ANSI/ASQ Z1.4 to Reduce Impact of Field Service Campaign AQL - Acceptable Quality Level 17
L Steam Sterilization Validation per ANSI ST 79 Other Medical Device Related Standards 2
G Dial Indicator Calibration Frequency - ASME/ANSI B89.1.10M-1987 Calibration Frequency (Interval) 4
E Does anyone have a good understanding of the application of ANSI/AAMI AT6? Various Other Specifications, Standards, and related Requirements 3
A Where to obtain ANSI/ASQ Z1.9 C-1 and D-1 tables Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
R Summary / Checklist for ANSI Z80.1 and ANSI Z80.3 Other Medical Device Related Standards 2
R ISO 10012, ANSI/NCSL Z540, ISO 17025 reference meet ISO 9001 7.4.2 (a) intent? ISO 17025 related Discussions 13
S ISO 2859-1 or Ansi ASQ Z1.4 in using AQL or AOQL - Need Help Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A ANSI/ASQ Z1.4 tables for C=0 - Setting up a robust Sampling Inspection Scheme Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J ANSI Y14.5M-1994 Interpretion Help Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
P Use of ANSI Standard for Metric Thread Plug Gage? General Measurement Device and Calibration Topics 1
R ANSI Z1.9 AQL 0.4 - What are the starting equipment expectations? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
D ANSI Z540-3 Risk Analysis - How to do the math for risk analysis General Measurement Device and Calibration Topics 2
P Inspection Level Interpretation - ANSI Z1.4-2008 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
G ANSI & ASME regardless of Maximum Material Condition when none is specified Various Other Specifications, Standards, and related Requirements 3
D ANSI IPC A-610 Maximum Jumper Wires Allowed on Boards by the IPC Standard Various Other Specifications, Standards, and related Requirements 1
W ANSI Z1.4 Switching Rule Applications Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
Q What are the differences between ANSI Z1.4, ANSI Z1.9, and ISO 2859-2? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
C Monitoring changes in ANSI standards - Control of External Documents Document Control Systems, Procedures, Forms and Templates 6
H Which OHSMS standard to choose? ILO? ANSI? CSA? BS? OHSAS? Occupational Health & Safety Management Standards 15
T Special Inspection Level 3 (S-3) per ANSI Z 1.4 & its relationship with ISO 2859-1 AQL - Acceptable Quality Level 1
K Understanding True position - Drawing Feature Control Frames - ANSI Y14.5 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
triathlonx13 ISO vs. ANSI Thread Standard (Dimensions) and Luer Taper for Medical Devices Various Other Specifications, Standards, and related Requirements 4
M ANSI/AIHA Z10-2005 specific for Occupational Health and Safety Management System Occupational Health & Safety Management Standards 13
J AQL Inspector Ruler based on ANSI/ASQ Z1.4-2003 AQL - Acceptable Quality Level 2

Similar threads

Top Bottom