Anyone have experience with Transmille calibrators

adamt

Involved In Discussions
We are a smaller calibration lab and we are using the Flukes 5520A and one of there 8.5digit DMMs for our electrical calibration. We are looking to replace it with another system. Anyone have experence with Transmille calibrators and their 8.5 digit DMM? OR any other calibration systems out there? Thank you for your time.
 

blueicecube2

Involved In Discussions
i have seen them in the market but i would recommend to sticking to Fluke 5720A and HP/Agilent/Keysight 3458A for most low frequency AC/DC calibration needs
 

adamt

Involved In Discussions
This has come up again in our lab. Still looking for anyone that has used both Fluke 5520A or the 5522A vs the Transmille multifunction calibrators.

I really like and are familiar with Fluke calibrators just wanting to get some input negative or positive from techs that have experience with both.
 

JayTeeHaitch

Registered
This has come up again in our lab. Still looking for anyone that has used both Fluke 5520A or the 5522A vs the Transmille multifunction calibrators.

I really like and are familiar with Fluke calibrators just wanting to get some input negative or positive from techs that have experience with both.

We have Fluke 5522A, Fluke 5320A, Fluke 8505A, Wavetek 1271, Transmille 3041A and Transmille 3200B.

One big deciding factor will be if you're using something like Met/Cal or Procal. Theoretically, both packages should work with all of those, but, having used both, I didn't find a simple way to use the Fluke calibrators with Procal and haven't found an easy way to use the Transmille calibrators with Met/Cal(Although, admittedly, I haven't spent a lot of time on trying to get either combination working).

From the perspective of manual use, there's not a lot in it, really. I've used the 5522A, 5320A and also the 3041A and 3200B as my primary calibrators for long periods. I'd say the Fluke stuff is a little more polished and I'd prefer the 5320A over the 3200B, but out of the 5522A and the 3041A it's a harder call and probably comes down to which one I've been using more recently, I'm having a hard time thinking of any significant features that one has over the other.

If you have any specific questions, I'm happy to answer them as best as I can.
 

AllTheThings

Involved In Discussions
I've also been eying transmille. The cost difference between them and Fluke can be...Significant. I haven't done a 1:1 comparison between the Fluke 5560 and the Transmille 4000 series though
 
Thread starter Similar threads Forum Replies Date
S Has anyone had experience with Intellect eQMS? ISO 13485:2016 - Medical Device Quality Management Systems 1
N Does anyone have experience of GB/T 34986-2017? China Medical Device Regulations 1
Z Does anyone have experience with EN ISO 17664 ? IEC 62366 - Medical Device Usability Engineering 9
M Honda Audits - Does anyone have any experience with the QAV audit? General Auditing Discussions 13
Q Does anyone have experience implementing a QMS without ISO certification? Quality Manager and Management Related Issues 2
QIE Anyone have experience with BPA Quality (QMS system based on Office365/Sharepoint) Quality Assurance and Compliance Software Tools and Solutions 1
W Does anyone have any experience with the Easy Metric System? General Measurement Device and Calibration Topics 2
D Has anyone here had any experience with PQ-FMEA software? FMEA and Control Plans 1
S Has anyone completed IATF 16949 Certification - Share your Audit Experience? IATF 16949 - Automotive Quality Systems Standard 2
E Does anyone have experience implementing a Tiered QMS? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
R Does anyone have any experience on change control? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
ScottK Does anyone have experience with how MDD unanounced audits of suppliers are going? EU Medical Device Regulations 21
A Does anyone have experience providing a summary of Pre-IDE discussions in the 510k US Food and Drug Administration (FDA) 1
A MDS software - Does anyone have experience with iPoint? RoHS, REACH, ELV, IMDS and Restricted Substances 8
M Does anyone here have experience implementing PCI DSS (Data Security Standard) IEC 27001 - Information Security Management Systems (ISMS) 10
GStough Rx-360 - Has Anyone Used This and What Was Your Experience? Supplier Quality Assurance and other Supplier Issues 3
J Does anyone have experience in submitting TSE Dossiers to EDQM? EU Medical Device Regulations 1
Colin Anyone with Experience of BS EN 1090? CE Marking (Conformité Européene) / CB Scheme 7
P Anyone have experience with GLOBAL GAP (Global Good Agricultural Practices)?? US Food and Drug Administration (FDA) 5
C South Korean KFDA's KGMP Audit- Anyone with Firsthand Experience to share? Other Medical Device Regulations World-Wide 4
E Anyone have experience with UL as ISO 13485/CMDCAS and MDD registrar Registrars and Notified Bodies 17
C Anyone have experience handling Feed Safety Management System (GMP+B2)? Other ISO and International Standards and European Regulations 1
J SFDA Product Quality Tracking Report - Anyone with experience to share? China Medical Device Regulations 2
J Integrated Management System - Anyone with experience dealing with ISOQAR? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Has anyone of you have experience with the World Class Manufacturing system? Lean in Manufacturing and Service Industries 6
DietCokeofEvil Anyone have any experience with a Helios UMG 50? General Measurement Device and Calibration Topics 1
K Does anyone has experience with determining if Lubricants and Greases are Food Grade? Food Safety - ISO 22000, HACCP (21 CFR 120) 6
I Does anyone here have experience with ISO 3951? Other ISO and International Standards and European Regulations 3
B Does anyone here have any experience with the Deming Prize? Quality Tools, Improvement and Analysis 1
K Has anyone had experience dealing with SEDEX (Supplier Ethical Data Exchange)? Customer and Company Specific Requirements 4
F Anyone have experience of a hiring a Social Anthropologist? Human Factors and Ergonomics in Engineering 9
N Does anyone have any experience or feedback using mind mapping software? Quality Tools, Improvement and Analysis 5
L Onsite Audit (Shenzen, China) - Anyone have any experience with a consultant? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
D Does anyone have experience using open source software for PDM? ISO 13485:2016 - Medical Device Quality Management Systems 1
E Does anyone have experience with ProWorksinfo software for Work Instructions? Quality Assurance and Compliance Software Tools and Solutions 1
X Anyone w/experience - Internal part Chem Labels in a Sensitive Info. environment? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
G Polyester Biocompatibility standards - Anyone here have any experience? ISO 13485:2016 - Medical Device Quality Management Systems 1
C Anyone with experience working with/for Hyundai? Career and Occupation Discussions 2
I Does anyone have direct experience with BVQI (Brazil)? Registrars and Notified Bodies 3
H Anyone here with experience with American Institute of Steel Construction (AISC) Various Other Specifications, Standards, and related Requirements 1
R Anyone willing to share their experience in Knowledge Management (KM)? Lean in Manufacturing and Service Industries 3
Ajit Basrur ISO 15378 certification - Has anyone experience with ISO 15378? ISO 13485:2016 - Medical Device Quality Management Systems 4
D Has anyone had experience with a Portable XRF Analyzer? General Measurement Device and Calibration Topics 4
T Experience with 7i Datastream software? Anyone? Calibration and Metrology Software and Hardware 4
P FARO Arm & Laser Tracker - Anyone with experience? Software question General Measurement Device and Calibration Topics 6
Le Chiffre Anyone with experience in open-source firmware in medical devices ISO 13485:2016 - Medical Device Quality Management Systems 5
K Has anyone had any experience with Rosettanet? Various Other Specifications, Standards, and related Requirements 1
T Has anyone had any experience with Kennedy Western University? Professional Certifications and Degrees 11
J Anyone with experience with the Chrysler APQP 10 point gate system? Customer and Company Specific Requirements 1
L Notified Body - Does anyone have experience using TUV Essex? Registrars and Notified Bodies 2

Similar threads

Top Bottom