SBS - The best value in QMS software

Anyone w/experience - Internal part Chem Labels in a Sensitive Info. environment?

X

xplr8n

#1
Newbie Poster. 1st off THANKS to Marc & those of you who share your vast and hard earned wisdom!

In a bit of a pickle:

  1. Client in Classified/Top Secret space...seeking ISO/AS/QS certification.
  2. Deals with chemicals as process components that hit 3's on all three NFPA sectors (HAZMAT)
  3. Has to black-out/remove labels to satisfy Security/Trade Secret requirements (But, a clear violation of Regs (Standards - 29 CFR) Hazard Communication. - 1910.1200)
  4. Needs to conform to ISO stds, and OSHA.
  5. Due to cost & performance may tend to skirt expiration dates via "Engineering Use Only" labels.
My solution has been to Create a Chemical Component Log which links all trackability/tracability info to the part number.
Log also tracks NFPA catagories (Calcs the highest risk for facility signage), tracks/flags expiration, and special storage reqts (Combustable, Flammable and Corosive Cabinets)




I also created a label that lists:
  • Part# (our link to what it was)
  • AKA (also known as),
  • MSDS#
  • Lot#
  • Expiration
  • Hazard/Special Handling information
  • and uses the NFPA Diamond & Specific HAZCOM symbols
Can anyone with experience in this space please comment if you see any glaring...or subtle errors/omissions...or if you have an alternitive solution...my desire is to do right by the employees, regulators, auditor and the company...
:thanks: in advance!
 
Last edited by a moderator:
Elsmar Forum Sponsor
X

xplr8n

#3
Re: Anyone w/experience -Internal part Chem Labels in a Sensitive Info. environment??

:notme:Anybody???

:frust::frust::frust::frust:
 

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#4
Re: Anyone w/experience -Internal part Chem Labels in a Sensitive Info. environment??

Doesn't look like it. Sorry about that. Maybe in the next couple of days someone with some experience in the field can help. I've worked in classified environments, but not in anything like this so I couldn't even venture a guess.
 
Thread starter Similar threads Forum Replies Date
N Does anyone have experience of GB/T 34986-2017? China Medical Device Regulations 1
Z Does anyone have experience with EN ISO 17664 ? IEC 62366 - Medical Device Usability Engineering 9
M Honda Audits - Does anyone have any experience with the QAV audit? General Auditing Discussions 3
Q Does anyone have experience implementing a QMS without ISO certification? Quality Manager and Management Related Issues 2
QIE Anyone have experience with BPA Quality (QMS system based on Office365/Sharepoint) Quality Assurance and Compliance Software Tools and Solutions 1
W Does anyone have any experience with the Easy Metric System? General Measurement Device and Calibration Topics 2
A Anyone have experience with Transmille calibrators General Measurement Device and Calibration Topics 1
D Has anyone here had any experience with PQ-FMEA software? FMEA and Control Plans 1
S Has anyone completed IATF 16949 Certification - Share your Audit Experience? IATF 16949 - Automotive Quality Systems Standard 2
E Does anyone have experience implementing a Tiered QMS? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
R Does anyone have any experience on change control? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
ScottK Does anyone have experience with how MDD unanounced audits of suppliers are going? EU Medical Device Regulations 21
A Does anyone have experience providing a summary of Pre-IDE discussions in the 510k US Food and Drug Administration (FDA) 1
A MDS software - Does anyone have experience with iPoint? RoHS, REACH, ELV, IMDS and Restricted Substances 8
M Does anyone here have experience implementing PCI DSS (Data Security Standard) IEC 27001 - Information Security Management Systems (ISMS) 10
GStough Rx-360 - Has Anyone Used This and What Was Your Experience? Supplier Quality Assurance and other Supplier Issues 3
J Does anyone have experience in submitting TSE Dossiers to EDQM? EU Medical Device Regulations 1
Colin Anyone with Experience of BS EN 1090? CE Marking (Conformité Européene) / CB Scheme 7
P Anyone have experience with GLOBAL GAP (Global Good Agricultural Practices)?? US Food and Drug Administration (FDA) 5
C South Korean KFDA's KGMP Audit- Anyone with Firsthand Experience to share? Other Medical Device Regulations World-Wide 4
E Anyone have experience with UL as ISO 13485/CMDCAS and MDD registrar Registrars and Notified Bodies 17
C Anyone have experience handling Feed Safety Management System (GMP+B2)? Other ISO and International Standards and European Regulations 1
J SFDA Product Quality Tracking Report - Anyone with experience to share? China Medical Device Regulations 2
J Integrated Management System - Anyone with experience dealing with ISOQAR? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Has anyone of you have experience with the World Class Manufacturing system? Lean in Manufacturing and Service Industries 6
DietCokeofEvil Anyone have any experience with a Helios UMG 50? General Measurement Device and Calibration Topics 1
K Does anyone has experience with determining if Lubricants and Greases are Food Grade? Food Safety - ISO 22000, HACCP (21 CFR 120) 6
I Does anyone here have experience with ISO 3951? Other ISO and International Standards and European Regulations 3
B Does anyone here have any experience with the Deming Prize? Quality Tools, Improvement and Analysis 1
K Has anyone had experience dealing with SEDEX (Supplier Ethical Data Exchange)? Customer and Company Specific Requirements 4
F Anyone have experience of a hiring a Social Anthropologist? Human Factors and Ergonomics in Engineering 9
N Does anyone have any experience or feedback using mind mapping software? Quality Tools, Improvement and Analysis 5
L Onsite Audit (Shenzen, China) - Anyone have any experience with a consultant? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
D Does anyone have experience using open source software for PDM? ISO 13485:2016 - Medical Device Quality Management Systems 1
E Does anyone have experience with ProWorksinfo software for Work Instructions? Quality Assurance and Compliance Software Tools and Solutions 1
G Polyester Biocompatibility standards - Anyone here have any experience? ISO 13485:2016 - Medical Device Quality Management Systems 1
C Anyone with experience working with/for Hyundai? Career and Occupation Discussions 2
I Does anyone have direct experience with BVQI (Brazil)? Registrars and Notified Bodies 3
H Anyone here with experience with American Institute of Steel Construction (AISC) Various Other Specifications, Standards, and related Requirements 1
R Anyone willing to share their experience in Knowledge Management (KM)? Lean in Manufacturing and Service Industries 3
Ajit Basrur ISO 15378 certification - Has anyone experience with ISO 15378? ISO 13485:2016 - Medical Device Quality Management Systems 4
D Has anyone had experience with a Portable XRF Analyzer? General Measurement Device and Calibration Topics 4
T Experience with 7i Datastream software? Anyone? Calibration and Metrology Software and Hardware 4
P FARO Arm & Laser Tracker - Anyone with experience? Software question General Measurement Device and Calibration Topics 6
Le Chiffre Anyone with experience in open-source firmware in medical devices ISO 13485:2016 - Medical Device Quality Management Systems 5
K Has anyone had any experience with Rosettanet? Various Other Specifications, Standards, and related Requirements 1
T Has anyone had any experience with Kennedy Western University? Professional Certifications and Degrees 11
J Anyone with experience with the Chrysler APQP 10 point gate system? Customer and Company Specific Requirements 1
L Notified Body - Does anyone have experience using TUV Essex? Registrars and Notified Bodies 2
Hershal Anyone have experience with ISO/IEC 15189 for medical laboratories? US Food and Drug Administration (FDA) 12

Similar threads

Top Bottom