AQL (Acceptable Quality Level) vs. IRR (Initial Reliability Requirement)

K

kimmi - 2002

#1
#1
AQL vs IRR

Where can I find a source that explains the correlation between AQL (acceptable quality level - like 1.5) and IRR (initial reliability requirement - like 95%) in acceptance sampling? It seems I remember coming across a cross-reference chart at some point some years ago, but I can't remember where. :confused:
 
Last edited by a moderator:
SQCpack - Communicate Quality Metrics
Elsmar Forum Sponsor
A

assuranceman

#3
#3
This one is easy. The Boeing approval guide gives the OC curves and the matched AQL and LTPD.
 
A

avigeva

#4
#4
TMHO there is no correlation between AQL and reliability. QAL predicts the probability of a part to pass QC (conform to spec or DWG) and Reliability prdicts the probability of a system to function properly over a specified time period at specified conditions (Design).

Avi
 
A

assuranceman

#5
#5
"Design Reliability" is not what is being referred to. IRR is a special Boeing sampling plan for Boeing suppliers. The probability of acceptance is different from the 95% of the AQL sampling plans.
 
A

Atul Khandekar

#6
#6
Could not find the cross-ref chart as mentioned in the first post, but this may be a good reference:
<<Mod: Dead Link Removed.>>

The Boeing document is:
D1-8007 - Approval Guide for Supplier Statistical Sampling Plans
 
Last edited by a moderator:
W

wlhh307

#7
#7
could you please send me an copy of this documents? I am learing something about Sampling. Thanks a lot!
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
C Example Work Instruction/Procedure for AQL (Acceptable Quality Level) AQL - Acceptable Quality Level 4
S What are typical Acceptable Quality Levels (AQL) adopted in Food industry? Food Safety - ISO 22000, HACCP (21 CFR 120) 1
W Application of AQL (Acceptable Quality Level) Concept AQL - Acceptable Quality Level 15
M AQL (Acceptable Quality Level) for Mixed Part Defect IATF 16949 - Automotive Quality Systems Standard 1
S AQL (Acceptable Quality Level) Report Form example wanted AQL - Acceptable Quality Level 1
Q AQL - How do I determine Acceptable Quality Level (AQL) for In-Process Inspection? AQL - Acceptable Quality Level 2
A What is the purpose of using AQL (Acceptable Quality Level) for Sampling? AQL - Acceptable Quality Level 3
K So confused with AQL - How does AQL (Acceptable Quality Level) fit with my company AQL - Acceptable Quality Level 7
Y Advice on this real case on AQL (Acceptable Quality Level)? AQL - Acceptable Quality Level 3
L AQL (Acceptable Quality Level) Question Quality Manager and Management Related Issues 7
H Need help with AQL (Acceptable Quality Level) for a QC inspection AQL - Acceptable Quality Level 8
S AQL (Acceptable Quality Level) for Safety Critical Parts AQL - Acceptable Quality Level 13
N AQL (Acceptable Quality Level) Sampling Plan for Small Lots AQL - Acceptable Quality Level 8
M AQL (Acceptable Quality Level) for Zero Defects AQL - Acceptable Quality Level 13
H AQL (Acceptable Quality Level) for Medical Devices AQL - Acceptable Quality Level 14
Q AQL - How do I find Acceptable Quality Level? AQL - Acceptable Quality Level 75
D Problem with AQL (Acceptable Quality Level) AQL - Acceptable Quality Level 9
C ISO 9001:2000 In Textile Industries - AQL (Acceptable Quality Level) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Marc AQL - Acceptable (Assured) Quality Level AQL - Acceptable Quality Level 0
C Linking Acceptable Quality Levels (AQL) and Average Output Quality AQL - Acceptable Quality Level 7
apestate Custom hardware product - What acceptable quality level (AQL) is expected in the US? AQL - Acceptable Quality Level 4
J LTPD (Lot Tolerance Percent Defective) vs. AQL (Acceptable Quality Level) Definitions AQL - Acceptable Quality Level 5
N Setting AQL (Acceptable Quality Level) on C=Zero inspections AQL - Acceptable Quality Level 16
W Acceptable Quality Levels (AQL) - What is the usage of AQL 100 to 1000? AQL - Acceptable Quality Level 11
Marc AQL (Acceptable Quality Level) vs. PPM (Parts per Million) - Equivalences? AQL - Acceptable Quality Level 17
L AQL (Acceptable Quality Level) vs. LTPD (Lot Tolerance Percent Defective) AQL - Acceptable Quality Level 12
M Applying AQL when 0 defects are acceptable AQL - Acceptable Quality Level 9
S AQL tables: how to read them Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
C What is the Appropriate AQL for Purchased Implantable Devices? Supplier Quality Assurance and other Supplier Issues 5
A % of defects on the whole batch based on result from inspection under AQL Level II Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
U How to pick between ANSI Z1.4 vs. ISO2859-1 for AQL Inspection? What are the major differences? AQL - Acceptable Quality Level 4
W LTPD, AQL, Ppk and Cpk validation sampling plan table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
R AQL, Consumer Risk and MA Statistical Analysis Tools, Techniques and SPC 2
A AQL - How to count samples with defects for each defect class AQL - Acceptable Quality Level 17
T Defining sampling plan for different AQL AQL - Acceptable Quality Level 3
S ARMY AQL - Requirements which don't have an AQL associated with them Manufacturing and Related Processes 2
M AQL table - I need to sample 1250pcs AQL - Acceptable Quality Level 3
Nicole Desouza Sampling plan for a customer who wants AQL 1.0 (per ANSI Z1.4) AQL - Acceptable Quality Level 5
V How to interpret AQL sampling tables AQL - Acceptable Quality Level 5
A AQL sampling bags of parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
I Sampling processes - Who must define the AQL level? AQL - Acceptable Quality Level 9
J AQL for Effectiveness Check - What AQL tiers to use on this type of sampling? Nonconformance and Corrective Action 9
S AQL Inspector's Rule - bring into CQE Exam? Professional Certifications and Degrees 5
N The question asks about sampling plans and AQL Reliability Analysis - Predictions, Testing and Standards 5
K Defining Acceptance Quality Level, I need clarity on AQL 1.5, 2.5, 4.0 AQL - Acceptable Quality Level 5
V Receiving Inspection AQL - Am I allowed to just pick a AQL? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
L Established a c=0 "AQL" or "RQL" table AQL - Acceptable Quality Level 5
A AQL Sampling Plan SOP / WI - Medical Device Industry Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
L How to calculate the Probability of Deficiency of the AQL of an Inspection AQL - Acceptable Quality Level 16
P Setting Acceptance Quality Limits (AQL) for New Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 4

Similar threads

Top Bottom