Are Control Plans "Summary Documents" not meant to replace Work Instructions?

T

Taliesyn

#1
I've somehow lost my ability to log in on the AIAG website to double check something so I was hoping one of you guys could help. Does the latest version of the APQP book still refer to Control Plans as "summary documents" which are not intended to replace detailed work instructions? I'm workig up to a radical shake-up in our QMS and I need to know that I'm on solid ground, so to speak .... but I can;t do the reserach myself because of the IT foul-up!
Thanks in advance :)
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Re: Control Plans & Work Isntructions

I've somehow lost my ability to log in on the AIAG website to double check something so I was hoping one of you guys could help. Does the latest version of the APQP book still refer to Control Plans as "summary documents" which are not intended to replace detailed work instructions? I'm workig up to a radical shake-up in our QMS and I need to know that I'm on solid ground, so to speak .... but I can;t do the reserach myself because of the IT foul-up!
Thanks in advance :)
Remember the AIAG APQP Manual is a document that contains guidelines. Each organization must decide on the most effective and efficient methods that work for them and their customer.

Here it is:

On Page 43, first paragraph it states: "The control plan does not replace the information contained in detailed work instructions."
 

Kales Veggie

People: The Vital Few
#4
I've somehow lost my ability to log in on the AIAG website to double check something so I was hoping one of you guys could help. Does the latest version of the APQP book still refer to Control Plans as "summary documents" which are not intended to replace detailed work instructions? I'm workig up to a radical shake-up in our QMS and I need to know that I'm on solid ground, so to speak .... but I can;t do the reserach myself because of the IT foul-up!
Thanks in advance :)
APQP does not make control plans mandatory. TS 16949 7.5.1.1 does (and also work instructions where appropriate)
 
Thread starter Similar threads Forum Replies Date
T Linking Control Plans and PFMEA's FMEA and Control Plans 3
T PFMEA and Control Plans on legacy product FMEA and Control Plans 5
J How to make Quality Control plans Quality Tools, Improvement and Analysis 5
Jimmy123 What is the difference between Error Proofing and Controls? ISO/IATF 16949 - Control Plans FMEA and Control Plans 16
K AIAG/VDA FMEA & Process Control Plans FMEA and Control Plans 0
B Main responsibility for Control Plans - creating and maintaining FMEA and Control Plans 15
A CAQ Software - Implementation of a Software for FMEA's and Control Plans FMEA and Control Plans 0
B Control Plans for Quality Management System Processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
optomist1 TS 16949 Control Plans - Non-Production Parts IATF 16949 - Automotive Quality Systems Standard 1
T Document Control of FMEAs and Control Plans FMEA and Control Plans 5
S Referencing procedures on Control Plans - Best Practices FMEA and Control Plans 3
N Understanding, Challenging & Approving Supplier Control Plans FMEA and Control Plans 7
J Incoming Inspection Plans under Design Control (part of DMR)? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
M Are 'Error Proofing Methods' required to be mentioned in Control Plans? FMEA and Control Plans 7
O Any recommendations on good book on Control Plans besides AIAG? FMEA and Control Plans 3
D Steps to Complete Quality Control Plans and Work Instruction Manufacturing and Related Processes 4
S MSA Study Requirements for Control Plans FMEA and Control Plans 5
S Seeking Ballooned PFMEA and Control Plans for Training FMEA and Control Plans 4
D Annual Layouts in Control Plans FMEA and Control Plans 5
G Interim Control Plans FMEA and Control Plans 6
S Ensuring Print Dimensions are in Control Plans, WI's and Receiving Inspection Document Control Systems, Procedures, Forms and Templates 3
J Question about APQP Control Plans FMEA and Control Plans 2
S What are your thoughts on Process vs Product Control Plans ? FMEA and Control Plans 3
D Bulk Material Supplier Control Plans APQP and PPAP 2
S Referencing other documents in Control Plans Quality Manager and Management Related Issues 5
J Efficiently Produce Control Plans and FMEAs FMEA and Control Plans 1
R Double Spec'ing in Control Plans FMEA and Control Plans 11
L Do ISO 13485 Certified Organizations need to have Control Plans and FMEAs? ISO 13485:2016 - Medical Device Quality Management Systems 11
Adriane How Confidential are my FMEAs and Control Plans Quality Manager and Management Related Issues 3
C Control Plans - Evaluation Measurement Technique Column - Torque Control FMEA and Control Plans 2
Brizilla Control Plans and the Shipping Process FMEA and Control Plans 13
R Rolling out Control Plans FMEA and Control Plans 1
5 Changes to Control Plans or PFMEA's (Process FMEA) FMEA and Control Plans 6
Q Control plans for Incoming, Warehouse and Shipping process FMEA and Control Plans 5
S Process Control Plans: Product Characteristics vs. Process Characteristics Quality Manager and Management Related Issues 7
D Good source for Checking and Evaluating Control Plans needed FMEA and Control Plans 4
C Operator understanding of what Control Plans are and how they are used Document Control Systems, Procedures, Forms and Templates 13
G Should Serial # of all Measurement Instruments (Calipers,etc) be in Control Plans? FMEA and Control Plans 7
N Control Plans and Inspection Plans for panel board industries FMEA and Control Plans 5
J Control Plans - VDA equivalent of AIAG APQP & Control Plan Manual VDA Standards - Germany's Automotive Standards 2
J Using Ppk to set up Control Plans - Injection molding Capability, Accuracy and Stability - Processes, Machines, etc. 7
J Control Plan Question - Are Control Plans considered a Form or a Work Instruction? FMEA and Control Plans 13
D TS 16949 and Control Plans - Need Tier II/III follow AIAG Annex A Format? IATF 16949 - Automotive Quality Systems Standard 27
kedarg6500 Guidance List for Control Methods in Control Plans? IATF 16949 - Automotive Quality Systems Standard 3
Douglas E. Purdy Classification of Suppliers & Control Plans to Reduce Receiving Inspection FMEA and Control Plans 6
G Control Plans vs. Detailed Routings ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
D How should "Set-up" Parameters be Addressed in Control Plans? FMEA and Control Plans 1
V FMEA and CONTROL PLANS - AEROSPACE FMEA and Control Plans 1
I Help writing FMEA & Control Plans - Re-writing our FMEA & Control Plans FMEA and Control Plans 2
Q How Many Control Plans Needed? Prototype, Pre-launch and Production? FMEA and Control Plans 3

Similar threads

Top Bottom