AS 9100 Revision C Transition and Recertification Audit

B

Boscoeee

#1
Just completed our recert and transition audit to Revision C of AS 9100. Four and half days for a company with 50 employees seemed like a bit much. But the team worked well together and was able make it through the week without any nc's. In general, following the guidelines and information from AS 9101D made all the difference in the world. it was very helpful in understanding where the auditor was headed in each of the clauses during the audit.:magic:

Now I am transitioning to a new industry, so there will be other challenges to say the least. I have moved to the heavy construction industry building Boom Trucks and back to ISO 9001:2008 Quality Management System.:)
 
Elsmar Forum Sponsor
W

wweng7

#2
Re: AS 9100 Revision C Tranisition and Recert Audit

Congrats for your successful upgrade to revision C. Now should be a piece of cake with your ISO struggle.
Did you use checklist from AS9101D appendix A (OER) to support your internal audit requirements?
Thanks in advance.
 
B

Boscoeee

#3
Re: AS 9100 Revision C Tranisition and Recert Audit

No I did not, however the Auditor suggested that I use them going forward.
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#4
Congrats on the AS9100 transition job. Your next challenge sounds interesting. "Heavy Metal" comes to mind.
 

dsanabria

Quite Involved in Discussions
#5
Just completed our recert and transition audit to Revision C of AS 9100. Four and half days for a company with 50 employees seemed like a bit much. But the team worked well together and was able make it through the week without any nc's. In general, following the guidelines and information from AS 9101D made all the difference in the world. it was very helpful in understanding where the auditor was headed in each of the clauses during the audit.:magic:

Now I am transitioning to a new industry, so there will be other challenges to say the least. I have moved to the heavy construction industry building Boom Trucks and back to ISO 9001:2008 Quality Management System.:)
Congratulations....

Q. Was it the monster under the bed that you were expecting or did you have a seasoned auditor that knew the process that guided you you thorough the process.

I have heard that Registrar, Consultants and numerous seminar have painted AS9100 Rev C as a huge monster with teeth and blood dripping from the edge of their mouth - ready to rip you apart.

Share with the cove your beginning expectations... we know the end:D
 
G

gbcqc

#6
Congratulations..

I went through that at the end of Aug - first of Sept. I was lucky to have an experience auditor so the audit went fairly smooth. We had minor findings.

Still waiting on the review committee to review the audit and sent us our certs. I was told that the review committee was behind on reviewing the upgrade audits by about 60+ days.

Has anyone one else heard of this?
 
G

gbcqc

#7
Well, speak of the devils and they answer. Right after I posted that last post about the review committee, I got the certificate of Registration. :lol:
 
#9
I have a question and wasn't sure exactly who to ask. We will be going for our Re-certification in January.
Right now we are going through retraining for our Internal auditor with and outside consultant which has led to a number of corrective actions. My question is can we have corrective actions open as long as they are in process of... or do they need to be closed and if not would this lead to us not being in compliance and not getting our recert?

Thank you for any help with this.
Char
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#10
My question is can we have corrective actions open as long as they are in process of... or do they need to be closed and if not would this lead to us not being in compliance and not getting our recert?

Thank you for any help with this.
While there is no requirement that states that all internally observed NC's must be resolved, there is always a RISK for some of the issues to be also uncovered during the CB audit. If the CB triggers any NC during your transition audit, you will have to implement corrective actions and the issue must be CLOSED before the CB issues your new certificate.

Also, keep in mind that the IAQG Supplemental Rules Document requires you (the registrant) to declare the organization ready for the transition audit. I would believe that your internal audit process to ascertain your readiness status is a very important component of your self evaluation.
 
Thread starter Similar threads Forum Replies Date
D Phase 2 Revision to AS 9100 Rev C AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 8
H AS-9100 revision A Question: What is a clause? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 9
L AS 9100 D consultant in Delhi, India AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
Nicole Desouza AS 9100 Rev D Gap Analysis AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
Nicole Desouza Plastic Extrusion of Medical Device Components - No ISO or AS 9100 Certifications Other Medical Device and Orthopedic Related Topics 7
Prashant G MSA Study - AS 9100 and and our customer want us to do MSA study for their parts dimension Reliability Analysis - Predictions, Testing and Standards 4
M AS 9100 - Requirement to become Certification Body (CB) AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
Q AS 9100 C and D Purchasing requirements difference AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
Marc AS/EN/JISQ 9100:2016 IAQG Sanctioned Aerospace Auditor Training Available (Nov 2016) AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
Marc IAQG 9100:2016 - QMS Requirements for Aviation, Space and Defense AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 10
A AS 9100 - Risk Management Procedure and Flow Chart examples AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
K AATT 9101E/9101:2014 - Suspension of all AATT 9100,9110,9120 classes and examinations AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
AshleyE AS 9100 7.5.1 g Accountability for all parts - Implementation AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 11
S 'Over Compliance' Error message in Wavetek 9100 General Measurement Device and Calibration Topics 10
M AS 9100 4.2.4 Process for making changes to records is not fully effective Quality Manager and Management Related Issues 4
K Guidance on AS 9100 4.2.3 Control of External Records AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
B How to apply Clause 8.2.4 from BS En 9100 & ISO9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
B Audit Checklist for AS 9100 Rev C wanted Quality Assurance and Compliance Software Tools and Solutions 3
J ISO 9001 vs. AS 9100 vs. Malcolm Baldrige National Quality Award AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
B Service Provider in NC Programing and Design - Exclusion clause in AS 9100 Rev C Quality Manager and Management Related Issues 5
A Explanation of AS/EN 9100 Clause 7.4.1 Special Process Sources AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
M AS 9100 Transition Checklist to ensure all areas of the new REV C are covered AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
C AS-9100 rev C Clause 4.2.4 - Supplier Records Requirements AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 10
Douglas E. Purdy Inspection & Test Laboratory Accreditation Requirements for AS 9100 C AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
quality1 Definition Design Responsible - Good Definition in the context of AS 9100 Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
T AS 9100 Rev C Clause 7.4.2 - Supplier Nonconforming Product AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
S Differences between the SAE AS9100C and BS EN AS 9100:2009 versions of the standard AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
J The Hierarchy regarding AS 9100 C and TS 16949 - is there one? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 8
A Best Training Provider for AS 9100 C Lead Auditor Training Professional Certifications and Degrees 6
K AS 9100 Rev C - Risk Management Procedure and Template Preparation AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
Project Man What is the most current ISO 9000 standard? I heard there is an ISO 9100 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
D AS 9100 Rev C "10 Minutes" Presentation to Non-Users needed AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 9
T AS 9100 Rev C AATT Exam Retake Guidance AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 106
L AS 9100 Rev.C guidance for the final exam Training - Internal, External, Online and Distance Learning 2
L Explanation of the note attached to 7.1(a) in AS 9100 Rev.C AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
T Survey or Statistics on the use of the AS 9100 Standard Worldwide AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
A ISO 9001 and EN 9100 Training in Europe Training - Internal, External, Online and Distance Learning 2
L AS9100 in Japan convert from JISQ 9100 to AS9100 consultant needed AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
R Your views and comments on these AS 9100 Related Audit Non Conformities AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
K AS 9100 Related Audit Non Conformities AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 10
Y What is the first step in implementing AS 9100 for a 4 person shop? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
L Employee Training for the ISO 9001 and AS 9100 Standard AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
T Records of New Processes for AS9100 - AS 9100 certification audit AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
B Looking To Find AS 9100 Audit Day Experience AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
T Customer Authorization for Use As Is & Repair - AS 9100 AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
M ISO 9001 and AS 9100 Registrations - AS9100 applicability to a software company AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
A EN/AS 9100 - Subcontractor audit and auditor requirements AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
B As 9100 Imported Legacy Blogs 0
B As 9100 Imported Legacy Blogs 0
B AS 9100 Follow Up Scheduled Imported Legacy Blogs 0
Similar threads


















































Top Bottom