AS9100B Clause 7.5.1.5 - Where did it go in AS9100C? Servicing/Post Delivery Support

Q

QE-Bob in Wisc

#1
I am working on our transition from B to C and I am reading through a 9100 Change and Rational white paper. I see 7.5.1.5 has been deleted from C but the paper gives no rational or indication if it was rolled into another area and I can't seem to find it. Does any one know if it was just deleted from C or it in fact does exisit in C just in a new spot? This was one of our exclusions so I need ot know if I need to continue the exclusion.

Thanks in advance.
 
Elsmar Forum Sponsor

Sidney Vianna

Post Responsibly
Staff member
Admin
#2
Re: AS9100 Clause 7.5.1.5 merged into Rev.C's 7.5.1.4 - Post Delivery Support

Control of work transfer has been moved to 7.1.4, in order to emphasize the importance of PLANNING for work transfers. Thus, AS9100C Post delivery support had to be renumbered. But it follows the AS9100B 7.5.1.5 "theme", with the necessary clarification that we are talking about servicing post delivery activities.
 
Thread starter Similar threads Forum Replies Date
D Controls Required for Off-site Work - AS9100B Clause 7.5.1.5 e) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
J AS9100B vs AS9100C - Clause 4.2.2 - Relationships between requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
D Definition Tooling - Define Tooling in AS9100B Clause 7.5.1 Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 5
A Design and Development Planning - AS9100B Clause 7.3.1 Design and Development of Products and Processes 2
W Inspection Measurement Documentation - AS9100B Clause 8.2.4.1 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
M Showing the Effectiveness of the Internal Audit Process System - AS9100B Clause 8.2.2 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
M What are the Mandatory Records required by AS9100b Clause 4.2.3 / 4.2.4 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
F AS9100B, Clause 7.4.1 - Our customers define who most of our suppliers are Supplier Quality Assurance and other Supplier Issues 3
R Environmental conditions for calibration - AS9100B clause 7.6 General Measurement Device and Calibration Topics 2
M Risk Management Procedure - AS9100B certified Aerospace Engineering Services AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
W Time Line for getting registered to AS9100B AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
V Do we need help (a consultant) migrating from AS9100B to AS9100C? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 12
J Communicating Quality Objectives - Minor Nonconformance AS9100B/ISO9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C 3 Major Changes between AS9100B and AS9100C AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
R Preparation for AS9100B conversion to AS9100C AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
K Aware of Subtle change from AS9100B - QMS Documentation and Changes (4.2.1) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
A AS9100B Auditing Case Studies General Auditing Discussions 8
H What's the meaning of this paragraph from AS9100B: 'Page31----7.6 f)? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 12
G Is there an AS9100C to AS9100B word for word comparison chart yet? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
G Interpretation of AS9100B 8.2.4.1 c - Inspection Documentation AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
A Recommended for AS9100B Certification! Thanks! AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
V AS9100B Time Limit? Time between your audit and when your CARs must be accepted AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
B AS9100B Quality Policy - Suggestions needed AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
I AS9100B Cl 7.5.1.3 - How to comply with validation of production tools requirement? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
L AS9100B Quality System Manual: Need an example! Quality Management System (QMS) Manuals 7
J Design Exclusion for AS9100B and not ISO 9001 - 7.3 Design conflicts Design and Development of Products and Processes 16
C AS9102 - Is it invoked when AS9100B is called out? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
C Special Process Validation - Electroplate - 7.5.2 of AS9100B AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
P 1st Article Part - Recording All Dimensions vs. Critical Dimensions - AS9100B AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 24
O Do we need ISO 9001 certification if we get AS9100b certified? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
D Interpreting "Design" and development - AS9100B Section 7.3 Design and Development of Products and Processes 15
C Are there any special requirements for performing internal audits to AS9100B Internal Auditing 0
C AS9100B - 4.3 Configuration Management - What do I do? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 55
R AS9100B - 2004-01 - Has been issued. AS9100B is AS9100A less Part 2 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
K ISO 9001 Clause 8.3 & 8.6 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
J ISO 9001:2015 Clause 8.5.1 Control of Production and service provision - Help with Work Instruction Access ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
P Maximum Mains Voltage (clause 8.5.3) IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
S IATF 16949 - Summary at a glance Clause wise - changes from ISO TS IATF 16949 - Automotive Quality Systems Standard 4
A ISO 14001:2015 clause 4.4 ISO 14001:2015 Specific Discussions 2
M Customer Property - ISO 13485:2016 Clause 7.5.10 ISO 13485:2016 - Medical Device Quality Management Systems 9
D PSW with waiver statement (hold harmless clause) IATF 16949 - Automotive Quality Systems Standard 3
Ashland78 MSA clause or wording needed. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A IT-NETWORK in PEMS Sub-Clause 14.13 for Medical Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
A 60601-1 clause 8.11.3.6 Test Clarification IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
S MSA clause 7.1.5.1.1 - Statistical studies on counting weight scale Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
Thee Bouyyy Internal NCR - API Q1 5.4.2b - API 16C Clause 4.1.3 Internal Auditing 9
L ISO 45001:2018 - Clause 5.4: Consultation and Participation of Workers Process Maps, Process Mapping and Turtle Diagrams 1
V Clause 7.1.3.1 Plant, facility, and equipment planning Lean in Manufacturing and Service Industries 0
J Aluminum anodization as MOP insulation? Clause 8.5.1.1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
ebrahim QMS as per ISO 13485, Clause 4.2 Requirements for regulatory purposes for Medical Devices Authorized Representatives. ISO 13485:2016 - Medical Device Quality Management Systems 3

Similar threads

Top Bottom