AS9100D production process scheduling requirements

kylerf

Involved In Discussions
#1
I had a question regarding what is required of scheduling as far as AS9100. I am creating a process matrix with AS9100 clauses to link each process but I am having trouble covering scheduling which is located within the production process.

For example, IATF16949 8.5.1.7 states:

"The organization shall ensure that production is scheduled in order to meet customer orders/demands such as Just-In-Time (JIT) and is supported by an information system that permits access to production at key stages of the process and is order driven."


Is this mentioned in AS9100D in some way that I may have overlooked while reading it?
 
Elsmar Forum Sponsor

howste

Thaumaturge
Super Moderator
#2
Look at AS9100 clause 8.1:
As appropriate to the organization, customer requirements, and products and services, the organization shall plan and manage product and service provision in a structured and controlled manner including scheduled events performed in a planned sequence to meet requirements at acceptable risk, within resource and schedule constraints.
I believe that's as close as you'll find in AS9100. It's much more generic than IATF 16949 in that it includes program management (pre-production activities) as well as production.
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#4
And, don’t forget, on-time delivery performance is an expectation. So, adequate production planning is a critical input into OTD.
 

BoardGuy

Quite Involved in Discussions
#6
So does that mean I can get my orders with more than a day or 2 lead time? :)
[FONT=&quot]Yes it’s called contract review. Clause 8.2.3 states that when “the organization determines that some customer requirements cannot be met or can only partially be met, the organization shall negotiate a mutually acceptable requirement with the customer”. If you customer want’s it in one day and your lead time is 5 days (WIP, material procurement, etc.) then you negotiate.[/FONT]
 

Golfman25

Trusted Information Resource
#7
[FONT=&quot]Yes it’s called contract review. Clause 8.2.3 states that when “the organization determines that some customer requirements cannot be met or can only partially be met, the organization shall negotiate a mutually acceptable requirement with the customer”. If you customer want’s it in one day and your lead time is 5 days (WIP, material procurement, etc.) then you negotiate.[/FONT]
Of course. But that doesn't change behavior. Everyone wants it yesterday. :)
 

BoardGuy

Quite Involved in Discussions
#9
Of course. But that doesn't change behavior. Everyone wants it yesterday. :)
[FONT=&quot]This is true but if you continually accept these types of orders without the negotiation of longer lead-time, you will fall victim of Clause 8.2.2.b, which states, “When determining the requirements for the products and services to be offered to customers, the organization shall ensure that… the organization can meet the claims for the products and services it offers”.[/FONT]
 

J.Enger

Involved In Discussions
#10
Not necessarily. For example, I want it the day before yesterday.
For one of our customers (approx 60% of our business), they agree to set time, then a few weeks later will say we need it yesterday, we bust our @$$ to get it done only to have them go "No we dont need it for 2 month now".
 
Thread starter Similar threads Forum Replies Date
K Maintenance requirements for Production Equipment in AS9100D General Auditing Discussions 8
B Purchasing AS9100D Standard in Japanese AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
Stefan Mundt AS9100D Major nonconformity due to recurrence of a NC during a subsequent CB audit. AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
B AS9100D Sampling Plan AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
A What To Clauses Exclude - AS9100D AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
F AS9100D Internal auditing requirements Internal Auditing 3
A AS9100D FAI requirements needed? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
F AS9100D, raw material standards are a requirement for manufacturing? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
F AS9100D Process Matrix for a small cnc machine shop AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
C AS9100D -8.5.1j - Accountability For All Products Tiny Parts AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
B Free downloadable AS9100D audit checklist ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 21
K AS9100D Clause 7.5.2.a) - What is considered to be "documented information"? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
T AS9100D - Scope of QMS for New Company - Only Choosing a Function Subset Due to Management AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 14
Nicole Desouza AS9100D - Calibration of Dies & Tooling - Plastic Extrusion AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
Q What is the difference between AS9100D 9.3.2.f and 9.3.3.a AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 7
S AS9100D PEAR - Examples for organization's method for determining process results? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
DuncanGibbons Why is 8.4 post-delivery activities before 8.6 release of products and services in AS9100D? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
K AS9100D 8.4.1.1 external providers question - Walmart, Home Depot, our lawn care team. etc. AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 20
W Core Process Metrics AS9100D for Product Planning? Quotes and sales? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
C Taking exception to customer requirements or specifications & AS9100D AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
I AS9100D Non-conformance for 10.2.1 b 2 and 10.2.1. b 3 e and f - Corrective Action AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 10
M AS9100D Competence and Training Records - X-Ray AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 2
P Design exclusion in AS9100D for commercial products AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 7
N Claiming exemptions (N/A) in AS9100D - what is the methodology and location? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 9
M AS9100d (section 7.1.3) example of compliance in machine shop environment. AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
D AS9100D implementation question AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 9
Y Time gap for First Surveillance Audit of AS9100D after initial certification AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 13
H AS9100D Cert question - Small machine shop - Where can I buy a certificate? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
M AS9100d Controlling External Provided Processes (purchasing 8.4) - The customer want us to use supplier X AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
C AS9100D 7.1.5.2 / Calibration of Employee Owned Measuring Equipment AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
A CAR from 3rd party AS9100D auditor - Root cause dilemma AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 45
Q AS9100D Corrective Action Procedure needed Document Control Systems, Procedures, Forms and Templates 1
A What does a good business practice Process Audit look like for AS9100D? Process Audits and Layered Process Audits 9
J AS9100D - Good ways to document an internal audit plan / schedule Internal Auditing 25
C AS9100D, Clause 8.1 - Operational Planning and Control AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 12
C AS9100D Contract Review Contract Review Process 8
J What to expect during a Change of Location Audit under AS9100D AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 0
L AS9100D Requirements vis-a-vis Section 8.5.1.3 AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
J AS9100D Cl. 8.4.3d - The organization shall communicate to external providers... AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
J AS9100D Sections related to 1st Piece and In-Process Inspection Manufacturing and Related Processes 15
K AS9100D - Is the PEAR required? Internal Auditing 1
M CB and Internal auditors most common nonconformities against AS9100D AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 16
D AS9100D vs AS9120B differences AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 5
J AS9100D Clause Brain Fade - Tool was past due for Calibration AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 11
M AS9100D Process Map Requirements - PEAR Forms AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 18
C AS9100D Flag AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
I Trying to explain some of the Management Review Inputs (AS9100D) Management Review Meetings and related Processes 10
D AS9100D 7.3 Awareness of customers quality policies AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 18
A AS9100D, Clause 8.4.1.1 - External Provider Scope of Approval AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 16
D Number of Audit Days - AS9100D Transition for a Small Shop AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
Similar threads


















































Top Bottom