AS9103 Variation Management Example Procedure

cutsdean

Involved In Discussions
#1
I have several customers wanted us to implement variation management in line with AS9103. I have taken an action to develop a procedure and wondered if anyone has something I can use as a starting point rather than re-inventing the wheel?

Any help would be greatly appreciated
 
Last edited:
Elsmar Forum Sponsor

John Broomfield

Staff member
Super Moderator
#2
I have several customers wanted us to implement variation management in line with AS9103. I have taken an action to develop a procedure and wondered if anyone has something I can use as a starting point rather than re-inventing the wheel?

Any help would be greatly appreciated
cutsdean,

I have no procedures for MSA, SPC (and mistake proofing) that belong to me but you may find this presentation useful:

http://www.sae.org/iaqg/publications/9103Overview.ppt

And this:

http://www.utc.com/Suppliers/Documents/utcqr09_1.pdf

And this:

http://elsmar.com/Forums/showthread.php?t=19354

John
 
Last edited:
Thread starter Similar threads Forum Replies Date
R Relating Cpk to Sampling Plans - AS9100C Para 8.2.4 & AS9103 Para 4.4 d. Capability, Accuracy and Stability - Processes, Machines, etc. 1
J Key Characteristics Annotations on Drawings - AS9103 Multiple Interpretations Quality Manager and Management Related Issues 1
S AS9103 Process Control Plan - MS Word .doc File Forms attached AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A Customer wants to invoke AS9103 on one time buy of 25 piece order. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
A Customer wants AS9103 applied to 30 piece order. Quality Tools, Improvement and Analysis 2
K Analysis variation among the lots during cpk calculation. Design and Development of Products and Processes 1
N Post registration variation to medical device Other Medical Device Regulations World-Wide 1
Q % Study variation low, % tolerance high - GR&R Interpretation help Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
D Variation between Faro Arms Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
D Do I need part variation while doing Destructive Variable Gage R&R MSA study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
E Changes to medical device submitted through a variation? EU Medical Device Regulations 1
T GRR based on part tolerance or process variation. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
B Gage R&R Acceptable (10-30%), deduct Total Variation from Tolerance Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
J What is the difference between Process Variation and Tolerance? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
D "It depends on the Auditor" Is excessive variation jeopardizing system certification? Registrars and Notified Bodies 40
Q What does % study variation of 20% mean in GRR? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 17
V Query on PA66+GF15% - Color variation (Natural to Yellowish) problem Manufacturing and Related Processes 20
Mikey324 GR&R - Little to no part to part variation in single part number Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 14
K Measurement system analysis "shall be conducted to analyze the variation..." Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
E Measurement System Analysis (With parts that have variation) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
S Variation Study on Mined Material - What do you call it (not a control chart) Statistical Analysis Tools, Techniques and SPC 7
P Total Variation in Data - Overall Importance of the Principal Components Reliability Analysis - Predictions, Testing and Standards 1
GURU SDI Measurement Variation in a Coating Thickness Meter Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M How to Measure Paper considering Variation and Humidity General Measurement Device and Calibration Topics 10
J Nested Gage RR Accounting for Process Variation Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
B Gage R&R MSA - Variation, Tolerance, Variance by different methods IATF 16949 - Automotive Quality Systems Standard 23
J Calculating part variation from historic data for GRR study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
I Gage R&R confusion on a part that has little variation Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
M How do I measure variation in my process ? Capability, Accuracy and Stability - Processes, Machines, etc. 3
B Reducing variation through multiple readings Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
J Reducing Variation via Multiple Readings Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
V Drift and Variation over Time of an Analytical Balance. Qualification and Validation (including 21 CFR Part 11) 2
T Variation in values of the levels in Factorial/Response surface design Using Minitab Software 1
B Process Control - Selecting Parts - NDC & Study Variation Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
J Weighing Balance Accuracy for Plastic Moulded Parts variation study Manufacturing and Related Processes 3
A How to understand the source of variability and "stream-to-stream variation" Six Sigma 8
I The concept of Surrogate Process Variation in MSAs Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
Bev D Probability question - Components of Variation study on a single use diagnostic test Statistical Analysis Tools, Techniques and SPC 1
X Poor GR&R results due to Low Part Variation Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 20
C Design of Experiments to Reduce Variation in a Lathe Operation Quality Assurance and Compliance Software Tools and Solutions 9
M 30% Max Study Variation Criterion - Where Cited? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
D Reducing Within Part Variation during a Gage R&R Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 26
H "Too little" variation in gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
C Multiple Variation Gage R&R for Automated Testers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
L DOE (Design of Experiments) - Analyse Variation with Minitab Using Minitab Software 5
S Gage R&R - Percent of Tolerance or Percent of Variation? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
J Variation (using ANOVA method) Required for Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
G Crossed and Nested MSA - Determining Components of Variation Using Minitab Software 6
2 DOE to minimize Noise Contributions that enlarge the Variation beyond Part-Part Quality Tools, Improvement and Analysis 5
B Components of Variation not within or between Quality Tools, Improvement and Analysis 4

Similar threads

Top Bottom