ASME NQA-1-1994 Standard Supplement 17S-1: Dual Storage

T

tenaciusgordon

#1
Hello,

I have a problem with this Sumplement because of I am using ASME NQA-1:2000 and my customer is using ASME NQA-1:1994.

I have been reading ASME NQA-1:2000 Requirement 7, subpart 2.7....and I haven't found where is described the dual storage.

Somebody knows if dual storage is described in NQA-1:2000? and where?

Thanks

Regrads


 
Elsmar Forum Sponsor
N

Norm Moreau

#4
This is a question that comes up quite often. In 1997 the NQA-1 committee decided to move to a more performance-based standard. This meant that a lot of the detailed requirements that were in the 1994/95 edition of the standard were moved to the subparts. In the case 17S-1 was moved to 17A-1, which made it a nonmandatory appendix. The problem that this caused is that many organizations have ignored the NRC and industry accepted practices found in the subparts like 17A-1 and choose other methods of implementation.

So to answer your question directly, if your customer is meeting the requirements of an earlier edition, which in your case means they probably have a license from the NRC, then you must also meet that requirement even though your program does not require it. In fact if you were to look at a newer version of the standard, e.g., 2008 with the 2009 addendum you will find the dual storage language back in Part I (Requirement 17). Hope this helps.
 
R

redbird

#5
I need to view the file mentioned below named NQA-1 Revision Comparison Matricies but when tried to download it said the file was damaged. Can anyone share this item with me in a usable format?
 

Marc

Fully vaccinated are you?
Staff member
Admin
#6
The file name is "NQA-1 Revision Comparison Matricies.pdf"

I have downloaded it and it opens correctly. It is not damaged.
 
Thread starter Similar threads Forum Replies Date
M ASME NQA-1-1994 Standards - Struggling with the supplement references Various Other Specifications, Standards, and related Requirements 16
C Budgetary cost to obtain ASME NQA-1 Quality Program Certification Quality Management System (QMS) Manuals 0
M ASME-NQA-1-2008 - Quality Assurance Requirements for Nuclear Facility Applications Other ISO and International Standards and European Regulations 8
M ASME NQA-1 and Interface Control Various Other Specifications, Standards, and related Requirements 34
O Environmental conditions per ASME NQA-1 2000 QA records? Records and Data - Quality, Legal and Other Evidence 4
A Rights of Access per ASME/NQA-1 2000 Misc. Quality Assurance and Business Systems Related Topics 17
K ASME, ANSI, ASTM and similar specifications and their requirements for document control. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
P FAI Ballooning ASME Y14.5 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
J Painted cut threads - ASME Pipe Suppliers Manufacturing and Related Processes 6
GoKats78 ASME Y14.5 Dimensioning and Tolerancing - Is there a JIS equivalent to Y14.5? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
optomist1 ASME Y14.5 Irregular vs Regular Features of Size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
O What does "Gap" and "Flush" in ASME Y14.5 mean? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
optomist1 Has anyone recently taken the GD&T ASME Y14.5M Certification Exam Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
C Positional Tolerance - Bonus / Datum Shift / ASME Y14.5M - Clarification Various Other Specifications, Standards, and related Requirements 9
D New ASME B89.1.13-2013 Standard for Micrometers General Measurement Device and Calibration Topics 6
K ASME BPVC (Boiler & Pressure Vessel Code) Calibration Requirements General Measurement Device and Calibration Topics 6
L How to conduct a Quality Audit based on ASME BPVC VIII-1 requirements Various Other Specifications, Standards, and related Requirements 4
M What Preceded ANSI/ASME Y14.5? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M ANSI/ASME B1.2 Revision Changes from the 2001 version Various Other Specifications, Standards, and related Requirements 1
L ASME Y14.5 Coaxial Feature Toleranced with Position w/o Reference Datum Design and Development of Products and Processes 2
G Dial Indicator Calibration Frequency - ASME/ANSI B89.1.10M-1987 Calibration Frequency (Interval) 4
D ASME Y14.5M 1994 and 2009 Training Resources Training - Internal, External, Online and Distance Learning 2
R ASME of Sterilizers from China for the US Dental Industry China Medical Device Regulations 3
D Auxiliary View Fold Line convention in ASME standard? Manufacturing and Related Processes 5
optomist1 ASME GD&T Certification Test - Converting Coordinate Tolerances to Profile Tolerances Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
G ASME Y14.5-2009 on tolerance limits Various Other Specifications, Standards, and related Requirements 1
optomist1 Is ASME GD&T Technologist Certification worthwhile? Professional Certifications and Degrees 7
M ASME B1.13M Standard - Specification of a Plug Gage of Minor Diamateter Various Other Specifications, Standards, and related Requirements 3
T Dimensions Before or After Coating? Drawing states ASME Y14.100 and Y14.5 apply Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
G ANSI & ASME regardless of Maximum Material Condition when none is specified Various Other Specifications, Standards, and related Requirements 3
R Distribution of Reference Documents and ASME Codes Document Control Systems, Procedures, Forms and Templates 1
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
R Standard Relevance & Updating - ASME B&PVC Various Other Specifications, Standards, and related Requirements 4
Q Dial Indicator Verification Procedure - ANSI/ASME B89.1.10M-2001 General Measurement Device and Calibration Topics 13
Stijloor ASME Y14.5M-2009 is on its way! Various Other Specifications, Standards, and related Requirements 10
T Nuclear Liability - Supplying construction materials - ASME under NCA 3800 Quality Manager and Management Related Issues 6
J Measurement Over Wires - Is there an ISO equivalent of ASME B1.16m Appendix B? General Measurement Device and Calibration Topics 12
D GD&T and "Fixed Fastener formula" (ASME Y14.5) Statistical Analysis Tools, Techniques and SPC 2
I European Code (EN13445) vs. ASME VIII - Calculating Spherical Heads Other ISO and International Standards and European Regulations 1
K PED (Pressure Equipment Directive) Certification - We hold an ASME 'S' stamp CE Marking (Conformité Européene) / CB Scheme 11
M ANSI-Y14.5M vs. ASME-Y14.5M - Does an ANSI-Y14.5M-1994 document actually exist? Various Other Specifications, Standards, and related Requirements 9
D Drafting Conventions per ASME Y14.5m - Three significant digits rule Various Other Specifications, Standards, and related Requirements 12
M Is ASME B89.1.5 a standard? Measurement of master discs or cylindrical plug gages Various Other Specifications, Standards, and related Requirements 10
ScottK ASME B&PVC Section VIII Div 1 question regarding "Seal" Various Other Specifications, Standards, and related Requirements 0
M New Gage Block Tolerances - ASME B89.1.9 Tolerances and Grades General Measurement Device and Calibration Topics 9
ScottK The term "Quality Control Manual" - ASME B&PVC question Various Other Specifications, Standards, and related Requirements 2
A ASME Symbols (process Flow Diagrams) - GM-1805 (KCDS) shows different symbols APQP and PPAP 3
P Conflicting tolerances on the component pitch - ASME Y14.5M - 1994 General Measurement Device and Calibration Topics 14
gard2372 Any websites or matrices to cross reference EN or DIN standards to SAE/ASME etc...? Other ISO and International Standards and European Regulations 3
D ASME standard - Format for Drawing (Print) Title Block Various Other Specifications, Standards, and related Requirements 7

Similar threads

Top Bottom