ASME NQA-1-1994 Standards - Struggling with the supplement references

M

MaryLou

#1
Hello,
Is anyone familiar with the NQA-1 standards. I am struggling with the supplement references. They reference in the subpart 2.7 (ASME NQA-1-1994Edition) verification and validation is equivalent to Supplement 3S-1 para. 4 of part I (this is just one of the examples). One would think it would be quite easy to depict the supplement but it is not. Can someone enlighten me on this?

Thank you,
 
Elsmar Forum Sponsor

SteelMaiden

Super Moderator
Super Moderator
#2
Re: ASME NQA-1-1994 Standards

OK, I am not the expert that you were hoping to find...I do hope that someone like that exists here, cuz I've looked for assistance in the past.

I am looking at my copy of the 2008 edition, I don't have the 94 edition, and I don't see "Supplements", I do however have Nonmandatory Appendices. Are they the same?
 
M

MaryLou

#3
Re: ASME NQA-1-1994 Standards

Hi,
Unfortunately I do not believe they are. The nonmandatory guidance is utilized in conjuction with the particular requirements and not as a supplement that I can tell. This area is designated as an appendix.
:thanks:
 

SteelMaiden

Super Moderator
Super Moderator
#4
Re: ASME NQA-1-1994 Standards

Sorry, then, I wish I could help you out, I have no supplements with the 2008 version. I am looking forward to learning more. I do hope that you will continue to educate us as you learn more about the NQA-1 requirements:bigwave:
 
T

tenaciusgordon

#5
Hello,

Looking for information of the supplements of the ASME NQA and I have found this post.

I am looking at the supplements in my copy of the ASME NQA-1:2000 edition and haven't fonund the supplements.

I think the supplements are not the same of the Non-mandatory Appendix, but are these supplements included in the rest of the document?

Best regards,
 
M

MaryLou

#8
Thanks for your replies. Just curious is anyone aware of any type of certification for software that is not embedded in the nuclear environment by an accreditation body other than ISO? My understanding is that there is no NQA-1 certification but there is a dedication for a commercial grade item. Any thoughts or comments?
 
T

tenaciusgordon

#9
Hello,

Have you heard about NIAC?

You can pass a specific audit for a Nuclear company belonging to this association and this audit will be valid for any other Nuclear company to become a commercial grade item

Best regards
 
M

MaryLou

#10
Hello,
The NIAC does not seem to be a certification or registration agency. It reads like a group with a membership. They audit you and state you are compliant with all the NRC standards utilizing the NUPIC checklist. We are a software company that supplies software to some nuclear customers (non dedicated commercial grade items) for analysis and not safety. So some of these requlations do not apply to us. We are not a nuclear facility nor do we post directly to the NRC but facilitate our customers by providing them with information needed. Customers have audited us as a supplier using the NUPIC checklist but only in the applicable sections. So it is a bit tricky. I was curious if anyone knew of an actual agency like ISO that does provide certifications both domestic and international.

Thank you,
 
Thread starter Similar threads Forum Replies Date
T ASME NQA-1-1994 Standard Supplement 17S-1: Dual Storage Various Other Specifications, Standards, and related Requirements 5
C Budgetary cost to obtain ASME NQA-1 Quality Program Certification Quality Management System (QMS) Manuals 0
M ASME-NQA-1-2008 - Quality Assurance Requirements for Nuclear Facility Applications Other ISO and International Standards and European Regulations 8
M ASME NQA-1 and Interface Control Various Other Specifications, Standards, and related Requirements 34
O Environmental conditions per ASME NQA-1 2000 QA records? Records and Data - Quality, Legal and Other Evidence 4
A Rights of Access per ASME/NQA-1 2000 Misc. Quality Assurance and Business Systems Related Topics 17
K ASME, ANSI, ASTM and similar specifications and their requirements for document control. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
P FAI Ballooning ASME Y14.5 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
J Painted cut threads - ASME Pipe Suppliers Manufacturing and Related Processes 6
GoKats78 ASME Y14.5 Dimensioning and Tolerancing - Is there a JIS equivalent to Y14.5? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
optomist1 ASME Y14.5 Irregular vs Regular Features of Size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
O What does "Gap" and "Flush" in ASME Y14.5 mean? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
optomist1 Has anyone recently taken the GD&T ASME Y14.5M Certification Exam Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
C Positional Tolerance - Bonus / Datum Shift / ASME Y14.5M - Clarification Various Other Specifications, Standards, and related Requirements 9
D New ASME B89.1.13-2013 Standard for Micrometers General Measurement Device and Calibration Topics 6
K ASME BPVC (Boiler & Pressure Vessel Code) Calibration Requirements General Measurement Device and Calibration Topics 6
L How to conduct a Quality Audit based on ASME BPVC VIII-1 requirements Various Other Specifications, Standards, and related Requirements 4
M What Preceded ANSI/ASME Y14.5? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M ANSI/ASME B1.2 Revision Changes from the 2001 version Various Other Specifications, Standards, and related Requirements 1
L ASME Y14.5 Coaxial Feature Toleranced with Position w/o Reference Datum Design and Development of Products and Processes 2
G Dial Indicator Calibration Frequency - ASME/ANSI B89.1.10M-1987 Calibration Frequency (Interval) 4
D ASME Y14.5M 1994 and 2009 Training Resources Training - Internal, External, Online and Distance Learning 2
R ASME of Sterilizers from China for the US Dental Industry China Medical Device Regulations 3
D Auxiliary View Fold Line convention in ASME standard? Manufacturing and Related Processes 5
optomist1 ASME GD&T Certification Test - Converting Coordinate Tolerances to Profile Tolerances Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
G ASME Y14.5-2009 on tolerance limits Various Other Specifications, Standards, and related Requirements 1
optomist1 Is ASME GD&T Technologist Certification worthwhile? Professional Certifications and Degrees 7
M ASME B1.13M Standard - Specification of a Plug Gage of Minor Diamateter Various Other Specifications, Standards, and related Requirements 3
T Dimensions Before or After Coating? Drawing states ASME Y14.100 and Y14.5 apply Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
G ANSI & ASME regardless of Maximum Material Condition when none is specified Various Other Specifications, Standards, and related Requirements 3
R Distribution of Reference Documents and ASME Codes Document Control Systems, Procedures, Forms and Templates 1
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
R Standard Relevance & Updating - ASME B&PVC Various Other Specifications, Standards, and related Requirements 4
Q Dial Indicator Verification Procedure - ANSI/ASME B89.1.10M-2001 General Measurement Device and Calibration Topics 13
Stijloor ASME Y14.5M-2009 is on its way! Various Other Specifications, Standards, and related Requirements 10
T Nuclear Liability - Supplying construction materials - ASME under NCA 3800 Quality Manager and Management Related Issues 6
J Measurement Over Wires - Is there an ISO equivalent of ASME B1.16m Appendix B? General Measurement Device and Calibration Topics 12
D GD&T and "Fixed Fastener formula" (ASME Y14.5) Statistical Analysis Tools, Techniques and SPC 2
I European Code (EN13445) vs. ASME VIII - Calculating Spherical Heads Other ISO and International Standards and European Regulations 1
K PED (Pressure Equipment Directive) Certification - We hold an ASME 'S' stamp CE Marking (Conformité Européene) / CB Scheme 11
M ANSI-Y14.5M vs. ASME-Y14.5M - Does an ANSI-Y14.5M-1994 document actually exist? Various Other Specifications, Standards, and related Requirements 9
D Drafting Conventions per ASME Y14.5m - Three significant digits rule Various Other Specifications, Standards, and related Requirements 12
M Is ASME B89.1.5 a standard? Measurement of master discs or cylindrical plug gages Various Other Specifications, Standards, and related Requirements 10
ScottK ASME B&PVC Section VIII Div 1 question regarding "Seal" Various Other Specifications, Standards, and related Requirements 0
M New Gage Block Tolerances - ASME B89.1.9 Tolerances and Grades General Measurement Device and Calibration Topics 9
ScottK The term "Quality Control Manual" - ASME B&PVC question Various Other Specifications, Standards, and related Requirements 2
A ASME Symbols (process Flow Diagrams) - GM-1805 (KCDS) shows different symbols APQP and PPAP 3
P Conflicting tolerances on the component pitch - ASME Y14.5M - 1994 General Measurement Device and Calibration Topics 14
gard2372 Any websites or matrices to cross reference EN or DIN standards to SAE/ASME etc...? Other ISO and International Standards and European Regulations 3
D ASME standard - Format for Drawing (Print) Title Block Various Other Specifications, Standards, and related Requirements 7

Similar threads

Top Bottom