Assembly Process Control Plan

I

iandb

#1
Hi All,

Can anyone provide me with a copy of a control plan that has been written for assembly process? I am fimiliar with writing one for a product as this is relatively straight forward but i am drawing a blank on how to write one for assembly. The process flow is as follows:
Goods Inwards
Stores
Componentary wash
Inspection
Identification
Assembly
Piston & Pin sub assembly
Front cover sub assembly
Test
Pack
Despatch

Thanking anyone in advance for calming the nerves!

Ian
 
Elsmar Forum Sponsor

Ajit Basrur

Staff member
Admin
#2
Hi Ian,

Its simple - if you have the template for Control Plan, just pu these activities in that template and you will be surprised how you could make a wonderful Control Plan !!!

;)
 
I

iandb

#3
What do you put in the product (part) 0r process column? example below is part of the wash process reading left to right on the control plan. Is this correct?

Wash
Wash: Cylinder Blocks
Manual Operator Control + dedicated wash in plastic tray
Wash Cycle?
Wash to70-85 Degrees
Free of contamination
Visual Inspection
100%
Continuous
Process Instruction Manual
Re-Wash if required
 
Thread starter Similar threads Forum Replies Date
A Soft Ware program for control of the assembly/manufacture process Manufacturing and Related Processes 3
J Need Help with FPY Data in Assembly Process Manufacturing and Related Processes 7
C In-process inspection - Tooling and assembly lines for automotive companies AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
S Process Inspection -Sub assembly process inspection sheet Lean in Manufacturing and Service Industries 3
S Assembly House Process Chart ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
M Establishing a FTQ (First Time Quality) process for an engine assembly line Quality Tools, Improvement and Analysis 1
N DFMEA, Drawings and PFMEA of an Assembly Process FMEA and Control Plans 12
S Can you help improve assembly process? Manufacturing and Related Processes 14
W Design and Development, and Assembly Process Quality Metrics AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
J What is Incorporation in Assembly/Manufacturing Process in FMEA? FMEA and Control Plans 4
C Severity of Effect on Process (Manufacturing/Assembly Effect) Scrap or Reworking FMEA and Control Plans 3
A PFMEA for an Assembly Process - Stuck in first steps FMEA and Control Plans 6
J Assembly Traveler Process Information Requirements Manufacturing and Related Processes 3
S ESD Flooring Requirements - Seperate room for soldering process and assembly Manufacturing and Related Processes 5
Chennaiite PFMEA (Process FMEA) for Vehicle Assembly wanted FMEA and Control Plans 4
M Correlation Production Time Study on a Process on an Assembly Line Manufacturing and Related Processes 3
B Quality Plan for ISO 9001-2000 - Assembly and Custom Build process ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
A Is the Assembly of the Prototype after Designing considered a Production Process? Design and Development of Products and Processes 11
W Actual examples of FMEA (DFMEA, PFMEA) for Car Assembly Process IATF 16949 - Automotive Quality Systems Standard 5
K Change in Occurrence for Low Volume Assembly Process FMEA (PFMEA) FMEA and Control Plans 8
A How do you structure your IC Assembly and Testing PFMEA (Process FMEA)? FMEA and Control Plans 10
S Process Characteristics for small manual assembly - How to determine FMEA and Control Plans 5
Z Simple assembly service - How could we do process study? Attribute data Statistical Analysis Tools, Techniques and SPC 1
J Can an assembly process produce 2 PPM (Parts Per Million)? Manufacturing and Related Processes 18
Manix Best Process Flow Diagram for Automotive Parts Assembly Document Control Systems, Procedures, Forms and Templates 4
A Cpk, Cmk in Electronic Assembly (Process Capabiity) Capability, Accuracy and Stability - Processes, Machines, etc. 4
B AOS Assembly Operations Sheet Inquiry Manufacturing and Related Processes 0
T ISO 13485 - Assembly instructions written vs. online ISO 13485:2016 - Medical Device Quality Management Systems 5
R DFA & DFM - Examples for Design for assembly and design for manufacturability Lean in Manufacturing and Service Industries 2
S Can assembly manufacturing sub-supplier be certified IATF 16949? IATF 16949 - Automotive Quality Systems Standard 6
M AS9102B Detail Part/Assembly FAI Form 1 box 13; AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
D Using non-conforming components even though the final assembly is conforming? Manufacturing and Related Processes 5
D AS9102 - Assembly FAI for Use As Is or Repaired Parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
O Identifying KPI for AS9100 8.1.4 - Prevention of Counterfeit Parts - PCB assembly contract manufacturer AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16
I PPAP Assembly and Components Manufacturing and Related Processes 3
Marc Quiz - Where did the idea of an assembly line come from? Coffee Break and Water Cooler Discussions 4
D How about another torque discussion? Assembly processes General Measurement Device and Calibration Topics 9
D Yet another torque question... Assembly processes AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
M Informational IMDRF final document – Assembly and Technical Guide for IMDRF Table of Contents Submissions Medical Device and FDA Regulations and Standards News 4
P NCMRs on in-proccess rejections - Products that fail during assembly ISO 13485:2016 - Medical Device Quality Management Systems 2
C Design for Assembly in DFMEA - Failure Effect of Sub-System(s) FMEA and Control Plans 5
L AS9102 Form 1 Section 13 Detail or Assembly Question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
J Facilities - Placing our assembly group into a separate building ISO 13485:2016 - Medical Device Quality Management Systems 8
G Assembly of cells into battery - Medical Devices IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
F Quality checks for pressurized hydraulic hose assembly Manufacturing and Related Processes 5
F CpK on a manufactured assembly? Reliability Analysis - Predictions, Testing and Standards 7
Q Is it acceptable to mix components from two different lots into an assembly? ISO 13485:2016 - Medical Device Quality Management Systems 1
S Does the cable assembly supporting a medical device gets classified accordingly? US Food and Drug Administration (FDA) 1
JoCam Medical Device Final Assembly Labelling EU Medical Device Regulations 2
M FAI Requirements of Detail and Assembly AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4

Similar threads

Top Bottom