Assessing Corrosion Damages on Steel finished externally with Epoxical Paint

L

LuMaUrFe

#1
Hi everybody.

I am in a marine project and we were in the process to receive in a barge some steel pipes that we are going to use as piles for a quay. Such piles fell into the sea while the barge sank. The pipes are finished externally with epoxical paint, but internally they don't have any corrosion protection. I need to assess that the recovered material is suitable to be used, and I want to know if there is a test or process that I can follow yo confirm how far the corrosion went into the pipes. Of course firstly we will make a visual inspection in order to know if corrosion appears inside the pipes.
 
Elsmar Forum Sponsor

harry

Super Moderator
#2
Over here, the Insurers would had arranged their surveyors to asses the damage. Such pipes would normally be auctioned.

I've always wondered whats the difference since such pipes are to be used in marine conditions but legally, who dares to assume the liability?
 
Thread starter Similar threads Forum Replies Date
R FOD Risk Assessment - What tools would you recommend for assessing FOD risk? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
T Assessing Hazard-Related Use Scenarios where control measures exist through standards IEC 62366 - Medical Device Usability Engineering 32
R Assessing Pipette Calibration Failures General Measurement Device and Calibration Topics 5
B Interpreting "misuse" when assessing Hazardous Situations ISO 14971 - Medical Device Risk Management 2
A Escalation to CAPA - Assessing if an NC warrants a CAPA Nonconformance and Corrective Action 4
A Assessing Risk for Medical Device Software ISO 14971 - Medical Device Risk Management 7
A Assessing/Mapping Employee Attitude during Competency Mapping (Assessment) IATF 16949 - Automotive Quality Systems Standard 15
J Assessing compliance with ISO 13485 Section 6.1 ISO 13485:2016 - Medical Device Quality Management Systems 10
A Assessing a Preventive Maintenance Strategy - Reliability or Maintenance Statistics Reliability Analysis - Predictions, Testing and Standards 2
D Assessing the Validity of Previous Measuring Results? General Measurement Device and Calibration Topics 8
Mikey324 Assessing Potential Field Failures (TS 16949 Requirements) Quality Manager and Management Related Issues 5
G Assessing Process Capability on Variation (Hardware Adjustment Mean Shift) Capability, Accuracy and Stability - Processes, Machines, etc. 4
B Assessing a Suppliers Technical Capabilities Supplier Quality Assurance and other Supplier Issues 6
S Objectives and Targets - Assessing a rate of achieving a goal Reliability Analysis - Predictions, Testing and Standards 7
J Assessing the understanding of occupational health and safety requirements Occupational Health & Safety Management Standards 3
T Assessing actuality to apply ISO 14001 ISO 14001:2015 Specific Discussions 12
Douglas E. Purdy Storage & Inventory - Assessing Stock for Deterioration at Planned Intervals 7.5.5.1 IATF 16949 - Automotive Quality Systems Standard 9
B ISO10012:2003 Question - Choosing or assessing the capability of a piece of equipment Other ISO and International Standards and European Regulations 1
A Assessing and managing monopolist suppliers Supplier Quality Assurance and other Supplier Issues 6
J Discrepancies - Determine the Magnitude and Assessing the Risk Nonconformance and Corrective Action 2
L Internal Auditing & Assessing Effectiveness Internal Auditing 8
L Internal Auditing & Assessing Effectiveness Internal Auditing 8
T Assessing Customer SPECIFIED Suppliers Supplier Quality Assurance and other Supplier Issues 9
T Corrosion in Bores after Zinc Plating machined Iron Castings in VCI Bags Manufacturing and Related Processes 1
V Regarding Corrosion resistance test Manufacturing and Related Processes 9
Ron Rompen Help with Corrosion (Humidity) Testing Procedure - Sintered Metal Steel Parts Manufacturing and Related Processes 9
J Clear Zinc Plating Corrosion issue...Need some education Manufacturing and Related Processes 4
M Al 2024-O aged to T42 Corrosion reaction after alkaline oakite160 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
I How to reply to customer 8D Fishbone related to a corrosion issue? Preventive Action and Continuous Improvement 7
I Any Ideas To Define The Root Cause of Corrosion Issue? Manufacturing and Related Processes 12
A Common causes of Corrosion on Alm 7075 Material Annodized, Tumbled, and Plated Manufacturing and Related Processes 6
E Would Corrosion on Aluminum be considered FOD (Foreign Object Debris)? Nonconformance and Corrective Action 8
C An Explanation of Salt Spray (Corrosion) Testing based on ASTM B117 Design and Development of Products and Processes 1
P Corrosion Quality Issue Root Cause - Electro Galvanized CRS - 0.8mm Problem Solving, Root Cause Fault and Failure Analysis 11
P Salt spray testing - Comparative corrosion data of 302 S26 vs Galvanised carbon steel Manufacturing and Related Processes 6
R Seek Corrosion-resistance Data for Galvanized and Galvannealed steel Manufacturing and Related Processes 1
M Auditor Sued for Damages, for Failure to Warn of Process Risk Misc. Quality Assurance and Business Systems Related Topics 32
B Profilometer Damages Parts? Extruded Plastic Tubing General Measurement Device and Calibration Topics 5
H Invalid customer returns - Assembly line damages our products IATF 16949 - Automotive Quality Systems Standard 8

Similar threads

Top Bottom