Banana jack for Fluke meters...?

wesatwork

Learning what I can.
#1
OK, so we have a bunch of Fluke 724/726's that we use to source voltage to calibrate input cards on a controllers. We are looking for a dual banana jack (not two single bananas) that will fit the spacing on these DMM's. Ideally it would be a dual banana to BNC adapter.

As an example the adapter pictured would be perfect if it had the correct plug spacing for these meters. Has anyone seen such an item?

1540904104930.png 1540904389610.png
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2
Well, you brought back some old partial memories... I have one of the BNC adapters you pictured above in my barn in a box of old kit. I don't even remember what we plugged it into - I guess an o-scope.

I don't remember ever having seen an adapter for a Fluke DMM <--> BNC connector.

Were it me I'd call Fluke and ask their customer service people. My bet is they would know if such an animal exists.

BTW - Nice DMMs.
 

dwperron

Trusted Information Resource
#4
I have never found the solid adapters for these.
I almost think it is because the way you connected this for 3 vs. 4 wire RTD was so convoluted and non-intuitive that they didn't want people to be able to try using the solid adapters you are looking for - using them would almost be a guarantee that you would connect incorrectly!
 

wesatwork

Learning what I can.
#8
Well, you brought back some old partial memories... I have one of the BNC adapters you pictured above in my barn in a box of old kit. I don't even remember what we plugged it into - I guess an o-scope.

I don't remember ever having seen an adapter for a Fluke DMM <--> BNC connector.

Were it me I'd call Fluke and ask their customer service people. My bet is they would know if such an animal exists.

BTW - Nice DMMs.
I have an email in with Fluke Technical Support...waiting. Yes they are solid DMM's if you don't need high resolution, great for in the field calibrations.
 
Thread starter Similar threads Forum Replies Date
S ECG Cable Banana to Snap or Tab electrode Adapters -- ISO 10993 Requirement Other Medical Device Related Standards 0
R Does the Banana connector deviate from the IEC 60601-2-25? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
I Flatness - Rectangular part using the three jack method Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
N QA and only QA, or Jack of all Duties? Crossing Departmental Boundaries Quality Manager and Management Related Issues 30
D API Specification Q1 for Pump Jack Oil and Gas Industry Standards and Regulations 1
Wes Bucey Neutron Jack [Welch] - Slash the bottom 10% of personnel Career and Occupation Discussions 24
Marc Jack Kilby, inventor of the integrated circuit, dies at 81 World News 1
M Corporate Culling - Jack Welch (of GE fame) - Fire 10% of the workforce every year? Philosophy, Gurus, Innovation and Evolution 42
F Learning Uncertainty Budget for Novice - Fluke 5520A Measurement Uncertainty (MU) 1
P How to Calibrate a HP 3458A Digital Multimeter with Fluke 5080A calibrator General Measurement Device and Calibration Topics 1
N Thermcouple Wire Calibration with a Fluke 753 General Measurement Device and Calibration Topics 0
N Calibration Traceability - Fluke 753 dpc with thermocouple Calibrated by Fluke ISO 17025 related Discussions 4
W Connecting IndySoft MET/CAL Import Module to a Fluke MET/TEAM Calibration and Metrology Software and Hardware 1
I Verification or calibration Fluke 8508a with 5720a? TUR not 4:1? Measurement Uncertainty (MU) 1
N Understanding the absolute uncertainty specification for a Fluke 5500A Measurement Uncertainty (MU) 3
R Looking for calibration specification for Fluke 7250 pressure controller General Measurement Device and Calibration Topics 5
J Could Fluke thermometer be used in SAT test in accordance to AMS 2750 ? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
S Calibrating Thermometer with Simulated Output Temperature from Fluke 5520A General Measurement Device and Calibration Topics 6
A Fluke Digital MultiMeter Calibration Traceability and Certificate General Measurement Device and Calibration Topics 11
R FLUKE 1653B Adjustment - Instructions or Service Manual wanted General Measurement Device and Calibration Topics 4
N Fluke 724 Calibration help needed General Measurement Device and Calibration Topics 8
B Calculating BMC (best measurement capability) for Fluke 8508A and HP 3458A Measurement Uncertainty (MU) 5
T Failure Modes on Fluke products? General Measurement Device and Calibration Topics 10
G Calculate a BMC for Thermocouple and RTD function with a Fluke 5500A Measurement Uncertainty (MU) 4
H METCAL Software (from Fluke) used only to get the Electrical Calibration Data? General Measurement Device and Calibration Topics 8
B Gage R&R on Oscilloscopes, Fluke voltmeters, Voltage probes, etc. & the like Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
J Calibration Procedure for a Wavetek 9100 using Fluke Met/Calibration software Coffee Break and Water Cooler Discussions 7
M Electrical calibration using Fluke 550 SC300 General Measurement Device and Calibration Topics 2
M Less expensive way to calibrate multimeters such as a "Fluke"? General Measurement Device and Calibration Topics 2

Similar threads

Top Bottom