SBS - The best value in QMS software

Basic requirements and steps involved to get NADCAP Certification

N

NANDAKUMAR_A

#1
Hello & Wishes to all,

We have Seal Quench furnaces in our Heat Treatment Shop and doing various Automotive parts. One of our customer is asking us to go for NADCAP certification. Kindly anybody can tell us the Basic requirments and steps involved to get NADCAP

Thanks
Nandakumar
:thanks:
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Hello & Wishes to all,

We have Seal Quench furnaces in our Heat Treatment Shop and doing various Automotive parts. One of our customer is asking us to go for NADCAP certification. Kindly anybody can tell us the Basic requirements and steps involved to get NADCAP

Thanks
Nandakumar
:thanks:
To begin, you may want to scroll down this page and look for the links there.
 
A

andygr

#3
You can of course just ask them dirrectly they are always willing to help a new victim.
Telephone: +1 724 772 1616
[email protected]

All kidding aside you should first start with pyrometry. Get a copy of AMS 2750 and make sure that you have your furnace checks set in compliance with this specification.
IF you are going to keep this internal then I would have those involved attend the Introduction to Pyrometry class.
 

Billy M

Starting to get Involved
#4
The AMS 2750 is the guide used for many of the Audit Checklist questions. The Temperature Uniformity Survey is one of the most difficult aspects for many companies to perform and the majority of companies outsource this. The suggestion for Pyrometry Training is a good approach if you are going to do this internally. If you register your company on the eauditnet.com website you will have access to reference documents such as the Auditors Handbook and Pyrometry guides.
 
J

Jan T

#5
You stated you are doing heat quenching for automotive. Are you going to be doing work for Aerospace Companies?

Regards
Jan
 
Thread starter Similar threads Forum Replies Date
N Help with basic understanding of Competence requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
rezayatmand IEC 60601-2-18 Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipmen IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
V Carbon Black (Master Batch) - Basic Requirements Manufacturing and Related Processes 5
Q Basic questions about AS9100C Quality Standard Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
B What are the basic Nadcap certification requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
K Should project managers know what basic regulatory requirements are? Internal Auditing 17
M Basic Legal Requirements for OHS (Occupational Health and Safety) Occupational Health & Safety Management Standards 2
Manix TS16949 Training Requirements - Basic introduction to the standard vs. Lead Auditor Training - Internal, External, Online and Distance Learning 8
R Basic TS 16949 Requirements in an Excel .xls Spreadsheet Excel .xls Spreadsheet Templates and Tools 9
D Basic Requirements and Qualifications for ISO 9001 Internal Auditors ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
C ISO 14001 Requirements - Three Basic Questions Miscellaneous Environmental Standards and EMS Related Discussions 2
A The basic requirements of ISO 9000:2000 in terms of document control? Document Control Systems, Procedures, Forms and Templates 4
A GMDN Registration Basic preliminary Information EU Medical Device Regulations 0
M Basic UDI and technical documentation EU Medical Device Regulations 1
C NB approval - Basic question about Notified Bodies and their role EU Medical Device Regulations 10
B Seven Basic Quality Tools (January 23) [Paid] Training - Internal, External, Online and Distance Learning 1
E Three basic questions about ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
B Evaluation of Basic Safety during EMC Immunity or Climate Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
A What is the difference between Basic UDI-DI and UDI-DI? EU Medical Device Regulations 6
J How to measure a Critical Characteristic that is a Basic Dimension Misc. Quality Assurance and Business Systems Related Topics 6
M EU Basic UDI-DI Trigger Points - When is a new Basic UDI-DI required EU Medical Device Regulations 3
M Informational EU – MDCG 2018-1 v2 Guidance on basic UDI-DI and changes to UDI-DI Medical Device and FDA Regulations and Standards News 0
F MDR 2017/745 Basic UDI-DI, UDI-DI & UDI-PI EU Medical Device Regulations 0
L Unacceptable risk for basic safety prior to or after mitigation? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
N EU MDR Basic UDI-DI and Technical Documentation for Systems EU Medical Device Regulations 22
E Basic Risk based thinking questions Risk Management Principles and Generic Guidelines 5
S Question about a basic additive variance/tolerance example Quality Tools, Improvement and Analysis 2
M Medical Device News EU – MDCG 2019-1 MDCG guiding principles for issuing entities rules on Basic UDI-DI Medical Device and FDA Regulations and Standards News 0
Marc Basic - How to Start a New Discussion Thread Elsmar Xenforo Forum Software Instructions and Help 1
S Basic Dimension W/O using FCF Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
G Setting Up a Basic Quality Lab for a small manufacturing company General Measurement Device and Calibration Topics 2
P Basic Minitab Help - It's about Linear Regression Using Minitab Software 1
L Lean Book for Basic Knowledge Lean in Manufacturing and Service Industries 2
L Seeking help in Basic Maintenance Knowledge Manufacturing and Related Processes 4
M "Basic Safety" versus "Essential Performance" IEC 60601 - Medical Electrical Equipment Safety Standards Series 12
M Use of Excel and VBA (visual basic for applications) in quality systems Excel .xls Spreadsheet Templates and Tools 3
P Basic questions about earning TSOA (Technical Standard Order Authorization) and PMA Federal Aviation Administration (FAA) Standards and Requirements 2
J Excel spreadsheet to use Basic and Mini MOST for Line Balancing Document Control Systems, Procedures, Forms and Templates 1
T How to report Basic Dimensions on a Dimensional Report (ISIR) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A Basic ISO 13485 Training Material ISO 13485:2016 - Medical Device Quality Management Systems 5
M Basic Dimensions on Machining Prints Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
M Basic International Standards required for a Manufacturing Industry (Optical Media) Other ISO and International Standards and European Regulations 4
L How to set up a basic electronic test equipment calibration laboratory General Measurement Device and Calibration Topics 3
R Rejecting a Part when Dimension Feature is Basic Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
O Metrology Devices to Measure the Basic Dimensions of Plastic Specimens General Measurement Device and Calibration Topics 6
F ISO 9001:2008 Fundamentals: Basic Questions - Controlled Documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
E How can I measure three true positions? GD&T basic question General Measurement Device and Calibration Topics 5
M SPC, Moving Range Chart and Weighted Graph Basic Questions Statistical Analysis Tools, Techniques and SPC 1
T Basic Document Control Database (Excel/Access) Document Control Systems, Procedures, Forms and Templates 3
V The Purpose of Basic Dimensions on Prints APQP and PPAP 6

Similar threads

Top Bottom