Blow Molding Process Audit Checklist

bwilliams

Starting to get Involved
#1
Does anyone have a process audit checklist for blow molding process. I am new to blow molding and needed some way to auudith the process.
 
Elsmar Forum Sponsor

Kales Veggie

People: The Vital Few
#4
Does anyone have a process audit checklist for blow molding process. I am new to blow molding and needed some way to auudith the process.
Start with understanding the Process FMEA, control plan and any customer concerns.
Ask the area supervisor to give you a tour of that area and explain to you the process.

Knowledge is power.
 

Jen Kirley

Quality and Auditing Expert
Staff member
Admin
#5
Good responses so far. Their point is, you are on the hook to make a meaningful, insightful audit checklist by studying the process, comparing it to the quality plans and standards requirements, looking at the history of problems there, and analyzing how all that fits together to make a process effective, profitable, robust and compliant. I have never seen a canned checklist that will do these things.
 
Thread starter Similar threads Forum Replies Date
B Injection / Blow Molding Process Evaluation Document Control Systems, Procedures, Forms and Templates 5
M Improving Quality in an Extrusion Blow Molding Company Quality Manager and Management Related Issues 2
G How many Airbus A380 planes must blow Rolls-Royce motors to ground the fleet? Coffee Break and Water Cooler Discussions 36
A Inspection Check Fixtures for Blow Molded / Injection Molded Components Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
D Suggestions for Ishikawa for hyperdetailed customer - plastic molding automotive parts Nonconformance and Corrective Action 9
D Measurables for Plastic Injection molding process Manufacturing and Related Processes 1
D Continuous Improvement Plan - Plastic injection molding IATF 16949 - Automotive Quality Systems Standard 1
L Purge - Injection Molding Processes Manufacturing and Related Processes 5
S CQI-23 - Molding System Assessment - Control of part weight IATF 16949 - Automotive Quality Systems Standard 5
C Clean room injection molding, raw material mixing requirements ISO 13485:2016 - Medical Device Quality Management Systems 2
C Raw material Mixing / Preparation for clean room class C injection molding Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
F Component Molding and Over-molding - Handling Resin Inventory Manufacturing and Related Processes 2
Z Operational Qualification for Injection Molding Supplier Quality Assurance and other Supplier Issues 6
E Does CQI-23 (Molding Sys. Asses.) apply to RUBBER molding? IATF 16949 - Automotive Quality Systems Standard 2
J Looking for FMEA plastic injection molding FMEA and Control Plans 8
J Injection molding: specific perimeters Manufacturing and Related Processes 14
S Change notice while switching to injection molding technique for manufacturing EU Medical Device Regulations 1
J Help with Arburg Allround 320s Injection Molding Machine Manufacturing and Related Processes 3
P Injection Molding Machine Validation Scope Capability, Accuracy and Stability - Processes, Machines, etc. 6
F CQI-23 Special Process Molding - Controls IATF 16949 - Automotive Quality Systems Standard 7
K CQI-23 Molding System Assessment Scope IATF 16949 - Automotive Quality Systems Standard 3
J Dimension control on injection molding parts Manufacturing and Related Processes 19
J Initial capability for injection molding part Capability, Accuracy and Stability - Processes, Machines, etc. 6
C IATF Cl. 9.2.2.2 Quality Management System Audit - CQI-23 Molding System Assessment IATF 16949 - Automotive Quality Systems Standard 1
A Plastic Injection Molding Process Troubleshooting Guide Manufacturing and Related Processes 1
R Cleaning validation for Molding Tools? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
N Injection Molding - Median individual control charts Statistical Analysis Tools, Techniques and SPC 6
R Can somone walk me through the IQ/OQ/PQ process for a new injection molding mold? Manufacturing and Related Processes 3
J Validating multiple injection molding machines efficiently ISO 13485:2016 - Medical Device Quality Management Systems 5
A Plastic Injection Molding - Post Mold Labeling Manufacturing and Related Processes 3
xfngrs New AIAG Special Molding Assessment CQI-23 ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 17
P Retrospective Plastics Injection Molding Process Validation Quality Manager and Management Related Issues 2
M Injection Molding Machine Software Validation Calibration and Metrology Software and Hardware 2
M SMED - 2750 Ton Injection Molding Machine Benchmark Benchmarking 3
B FDA Guidance on Metal Injection Molding process validation 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
A Determining Critical Tests for my Injection Plastic Molding Supplier Reliability Analysis - Predictions, Testing and Standards 4
D Risk Based Inspection: Injection Molding Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
J AS9100 C - Is Molding of Rubber Parts a Special Process (7.5.2)? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
F Injection Molding Weight Control Systems Document Control Systems, Procedures, Forms and Templates 2
A Molding Release for Medical Plastic Injection Molded Parts 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
S Plastic Injection Tooling - Understanding Plastic Injection Molding Terms Manufacturing and Related Processes 4
K Which chart to use and how to plot it? Injection Molding Production Statistical Analysis Tools, Techniques and SPC 5
K Defect Detection for Fresh Injection Molding Solid Parts Manufacturing and Related Processes 5
W Injection Molding Validation Required or Not - FDA QSR 820.75 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 10
K How to start Implement SPC for Injection Molding Process? Statistical Analysis Tools, Techniques and SPC 24
F Who should provide blank drawings and foundry molding drawings? Manufacturing and Related Processes 3
K 100% Inspection or do the usual IQ, OQ, PQ Validation - Medical Molding Design and Development of Products and Processes 3
R Injection Molding - Resin Drying Specification for EASTMAN Tenite Propionate 385A Manufacturing and Related Processes 6
M Where to Start when Implementing ISO Standards in Rotational Molding ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
L Interpreting Injection Molding Tooling Documents - Cavities Manufacturing and Related Processes 3

Similar threads

Top Bottom