Breakable Glass/Acrylic Standards needed

hogheavenfarm

Quite Involved in Discussions
#1
Hello Covers -
One of the items we manufacture is a 'breakable emergency panel' , about 6 inches square, and about 1/8" thick acrylic type "FF".
Because we make a large variety of these and new designs are always on the table, I have been looking for any standards or requirements, but have not found any. I know I can conduct some tests myself (and probably will), but does anyone know if there is some regulation out there? I thought there would have been something about this due to "manual call point" breakable fire enclosures, but I see nothing on it, and glass is not quite the same as acrylic.
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
hogheavenfarm Breakable Plexiglass Standard Occupational Health & Safety Management Standards 1
G Glass scale calibration at 74 degrees F? General Measurement Device and Calibration Topics 4
D Is there a specific location for PPE such as safety glass holders and glove dispensers should be mounted Occupational Health & Safety Management Standards 10
A Glass and brittle plastic Policy - Required per FSSC 220002-4? Food Safety - ISO 22000, HACCP (21 CFR 120) 0
A IEC 60601-1 Impact test on glass touch controller IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
K Verifying gas tight glass syringe used for making standards General Measurement Device and Calibration Topics 4
Marc Modified Google Glass can teach you Morse Code in four hours World News 0
M Identification of Glass Instruments and Measurement Devices General Measurement Device and Calibration Topics 2
G Where to get a NIST Traceable Master Glass Refractive Index Sample General Measurement Device and Calibration Topics 5
G Glass Ampoules for a Liquid Embolic System Medical Device Other Medical Device and Orthopedic Related Topics 1
T Liquid in Glass Thermometers verification Reliability Analysis - Predictions, Testing and Standards 4
S Glass Bead Blast Cleaning Spec TT-C-490 Rev D Various Other Specifications, Standards, and related Requirements 1
J Using P-Charts for Glass Manufacturing to Monitor and Control Attributes Statistical Analysis Tools, Techniques and SPC 2
B Mecury-in-Glass Thermometer Calibration Requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
B What a mess!!! Nebula Glass International (d.b.a. Glasslam) vs. Wacker Chemicals Quality Manager and Management Related Issues 1
Y Calibration Frequency Requirements of Liquid in Glass Thermometer General Measurement Device and Calibration Topics 2
S ASTM F2179-02 Glass Scratch Test Procedure Requirements Manufacturing and Related Processes 1
J Appropriate Test Environments for In-Glass Liquid Thermometer Calibrations General Measurement Device and Calibration Topics 2
C FM (Foreign Material) Specifications for Plastic Molded Devices & Glass Containers Other Medical Device Related Standards 5
H Surgical Sealant Package Integrity Test for Glass Vial Filled Product Other Medical Device Related Standards 3
Marc Solid Glass Jellyfish Paper Weight - How do they make this? Coffee Break and Water Cooler Discussions 12
P Plate Glass: Cosmetic Inspection for Scratches Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
P Sample Manufacturing Method for Ball Drop Test of Automotive Tempered Glass General Measurement Device and Calibration Topics 5
P Retest for Reconfiguration IEC 60601 - Robot that processes samples onto glass plates IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Jim Wynne Glass-top Patio Tables Shatter Without Warning Coffee Break and Water Cooler Discussions 14
I Glass Packaging Material (Jars) - Chemical, Physical and Biological Controls Manufacturing and Related Processes 1
Howard Atkins ISO 3591 - Sensory analysis - Wine tasting glass - At last a useful ISO standard Other ISO and International Standards and European Regulations 1
Mohammed Gouda Liquid Bath Depth for Calibration of Glass Immersion Type Thermometer General Measurement Device and Calibration Topics 10
Mohammed Gouda How to "Anneal" a Glass Thermometer General Measurement Device and Calibration Topics 9
Mohammed Gouda How to Calibrate Glass Thermometers General Measurement Device and Calibration Topics 9
A Adhesive Longevity Tests - Glued Silicone used in a Shower to Bond Glass Panels Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
I FAI (First Article Inspection) for Bulletproof Glass normally for Autos? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
Y Energy Savings in Glass Tablewares Company - Continuous Improvement Manufacturing and Related Processes 3
K ISO 22000 Implementation in Chicken Product Mfg - is 'Glass Policy' necessary? Food Safety - ISO 22000, HACCP (21 CFR 120) 5
D How to Schedule Mercury-in-Glass Thermometer Calibration Calibration Frequency (Interval) 17
Marc Vinyl Replacement Windows - 'Weeping' condensation at Glass / Vinyl Interface After Work and Weekend Discussion Topics 20
samer Glass of Milk Coffee Break and Water Cooler Discussions 5
P Automotive Safety Glass Strength - Amount of Force to Shatter Safety Glass Human Factors and Ergonomics in Engineering 7
Marc Glass-Ceramic Kitchen Range - Reliability and Durability Reliability Analysis - Predictions, Testing and Standards 17
S Mercury in Glass Thermometer Uncertainty Budget Measurement Uncertainty (MU) 1
B Destructive Gage R&R method for a glass factory study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
D Level of accuracy required for the calibration of glass mercury thermometers General Measurement Device and Calibration Topics 6
Marc Calibration of Glassware and Liquid in Glass Thermometers General Measurement Device and Calibration Topics 2
S Acrylic in Class II b Active Medical Device IEC 60601 - Medical Electrical Equipment Safety Standards Series 2

Similar threads

Top Bottom