Cadastro according RDC40/2015 (Brazil) Cadastro Registration Requirements

tibon74

Involved In Discussions
#1
Hi !
I heard that, according to the RDC40/2015, we can not declare in a cadastro more than 1 real manufacturer by instrument. It seems that we need another cadastro to add a real manufacturer.
Is it correct ?
Thank you !
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
K Overall residual risk according to ISO 14971:2019 ISO 14971 - Medical Device Risk Management 5
R SAT (System Accuracy Test) temperature according to AMS2750E AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
T Clearance and Creepage according to Subclause 8.9.1 for MOPP IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
G Is impact test according to IEC 60601-1 applicable for HAND-HELD equipment if also classified as BODY-WORN? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
M What are the changes in supervising according to ISO17025? ISO 17025 related Discussions 7
M How do you Audit an Distribution Facility according to MAQMSR IATF 16949 - Automotive Quality Systems Standard 3
M Saudi Arabia (KSA) - Medical Device Vigilance according to 93/42/CEE Other Medical Device Regulations World-Wide 0
C What falls under the 'Customer Property' according to ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 10
Ahang "DIRECT MODE" or "ADJUSTED MODE" according to ISO 80601-2-56 Other Medical Device Related Standards 1
H Communication plan according to ISO9001 - Pharmaceutical field Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
D Risk management according to ISO 14971 - When to document risk controls? ISO 14971 - Medical Device Risk Management 10
S Medical device CER (clinical evaluation report) according to MDR EU Medical Device Regulations 11
S EN 285:2006 and EN 285:2015 - Can we test according to EN 285 ourself? Other Medical Device Related Standards 2
S Class II Medical Device Conformity Assessment Route according to Annex V only CE Marking (Conformité Européene) / CB Scheme 7
W TF according to MDR 745/2017 CE Marking (Conformité Européene) / CB Scheme 5
T I need to make test reports according IEC 62304 & IEC 62366 IEC 62366 - Medical Device Usability Engineering 2
B Attribute Gage R&R study according to "Charbonneau" Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
P Sample of an end-use-letter for drugs according to FDA requirements US Food and Drug Administration (FDA) 2
R Clinical Evaluation according to MEDDEV 2.7.1 (Rev 4) - seeking template ISO 13485:2016 - Medical Device Quality Management Systems 6
J Bill of Materials required according to MDD93/42/EC Annex II Section 3.2 ISO 13485:2016 - Medical Device Quality Management Systems 5
T Formulas for Calculating Coefficients for RTD / PRTD Calibration According to ITS-90 General Measurement Device and Calibration Topics 5
H Functional Safety PFH vs PFD according to IEC 61508 Reliability Analysis - Predictions, Testing and Standards 3
Z Failure Mode Identification in PFMEA according to AIAG FMEA Rev.4 FMEA and Control Plans 6
M Mention "according to Work Instruction" in Control Plan FMEA and Control Plans 3
K Understanding Risk Management Requirements according to AS9100 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
A Clean Test according to ISO 16232 - Some points Other ISO and International Standards and European Regulations 2
E Internal clearance distance according to 60601 IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A Management Review not conducted according to schedule Management Review Meetings and related Processes 9
L Find the right Test to fail method according to the standards of LV 124 FMEA and Control Plans 1
K Accessory - Definition of Accessory According to PMDA Japan Medical Device Regulations 1
K Stand Alone Software definition according to PMDA Japan Medical Device Regulations 3
K The class of endoscopic equipment according to EU/EMA EU Medical Device Regulations 2
G Sampling Plan according to SAE ARP9013 C=0 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
S How are risks managed according to AS9100? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
N Protein content limit in condom according to ASTM standard Other ISO and International Standards and European Regulations 3
K RISK ANALYSIS SAMPLE according to Annex ZA of EN ISO-14971-2012 Other Medical Device and Orthopedic Related Topics 1
K Definition of ME Equipment/Applied part according to IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
L How to start implementing a QMS according to ISO 17025 ISO 17025 related Discussions 5
J Product and Process Audit according to ISO/TS 16949:2009 Process Audits and Layered Process Audits 9
M Do QC inspectors need an annual eye exam according to API Q1 Oil and Gas Industry Standards and Regulations 22
J Are SPC Charts Controlled Documents according to TS 16949? Quality Manager and Management Related Issues 4
C Risk Analysis of a "Medical System" according to ISO 14971 ISO 14971 - Medical Device Risk Management 5
A Is Quarry Blasting a Special Process according to 7.5.2? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
M Shall Customer Questionnaire (8.2) be Verified according to 7.6? TS 16949 IATF 16949 - Automotive Quality Systems Standard 7
M MSA - According to the formula cg how much tolerance should be put in place? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
E Understanding TS 16949 Clause 8.2.3 and How to Audit according to it IATF 16949 - Automotive Quality Systems Standard 7
N RS485 stand to meet the EFT (Electrical Fast Transients) test according to IEC 60601 ISO 13485:2016 - Medical Device Quality Management Systems 3
H Which is the best OHSMS model according your analysis*and your experience ? Occupational Health & Safety Management Standards 24
A Classification of ECG/EKG Electrodes according to MDD 93/42/EEC? EU Medical Device Regulations 2
M Should Cpk be > 1.33 or 1.67 and according to which standard? Capability, Accuracy and Stability - Processes, Machines, etc. 5

Similar threads

Top Bottom