Calibration Procedure for an IC (Integrated Circuit) Test Socket

L

lhevin

#1
Hi guys,
can anyone help me with my current project.
I need to create a calibration procedure for IC test socket.

Im thinking of using Gr&r as tool but found it not sufficient.
is there other ways to calibrate the test socket without using software.

Im thinking of using good unit only as set up verifier.

please need your help guys.
 
Elsmar Forum Sponsor

Miner

Forum Moderator
Staff member
Admin
#2
Re: Calibration for Test Socket

Calibration and Gauge R&R are different. Gauge R&R assesses precision of a measurement device. Calibration has nothing to do with precision but does with accuracy. You would need to perform a bias and linearity study to evaluate this.
 

somashekar

Staff member
Super Moderator
#3
Hi guys,
can anyone help me with my current project.
I need to create a calibration procedure for IC test socket.

Im thinking of using Gr&r as tool but found it not sufficient.
is there other ways to calibrate the test socket without using software.

Im thinking of using good unit only as set up verifier.

please need your help guys.
Welcome to the cove lhevin ~~~
Calibration makes a meaning if your IC (Integrated Circuit) Test Socket is a monitoring and measuring device.
I guess it is not, and is perhaps a fixture within the test system.
You could perhaps think of an installation check of the test socket and confirm good connectivity using a known good sample IC.
 
L

lhevin

#4
Welcome to the cove lhevin ~~~
Calibration makes a meaning if your IC (Integrated Circuit) Test Socket is a monitoring and measuring device.
I guess it is not, and is perhaps a fixture within the test system.
You could perhaps think of an installation check of the test socket and confirm good connectivity using a known good sample IC.
the IC test socket I used is for measuring device.
what I mean to known is the performance or to calibrate the test socket only.
 
L

lhevin

#5
Re: Calibration for Test Socket

Calibration and Gauge R&R are different. Gauge R&R assesses precision of a measurement device. Calibration has nothing to do with precision but does with accuracy. You would need to perform a bias and linearity study to evaluate this.
hi miner,
can you explain to me the usage of bias and linearity. and why it should be done in this type of project.

im sorry, im a newbie in this kind of projects.
 

Solinas

Involved In Discussions
#6
I've been in IC's since 1984.

A test socket is just a socket. You have tester hardware, slap on the socket, plug an IC into the socket and test.

The tester measures. The socket does not. It does not measure, so there is nothing to calibrate or R&R.

Why are you looking at our socket? What are you trying to accomplish?

Solinas
 
L

lhevin

#7
guys, thanks for inputs..

sorry for confusions..
here's what i need to evaluate..

i'll run a series of testing and I need to perform calibration for test evaluation board.

I already test a couple of units, and encounter discrepancy on readings.
I need to know what where is the problem, on IC i tested or the board I used.

can you pls advise what i need to used/do for this kind of evaluation.

pls...
 
Thread starter Similar threads Forum Replies Date
M Procedure or Specification For Extending Gages Calibration Calibration Frequency (Interval) 2
S The procedure for replicate check in calibration lab as per ISO 17025 General Measurement Device and Calibration Topics 2
I Tool maintenance and calibration procedure - Calibrating tools/equipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
S Clarification of threaded ring gage calibration procedure/requirements General Measurement Device and Calibration Topics 2
J Calibration Recall - Lost Gages procedure example wanted General Measurement Device and Calibration Topics 4
L ISO 17025 Para. 5.4.5 - Method (Calibration Procedure) Validation Requirements ISO 17025 related Discussions 2
S Calibration of Laboratory Equipment in accordance with the manufacturer's procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M Calibration Procedure Traceable to National/International Standards (API Q1 9th Ed) Oil and Gas Industry Standards and Regulations 3
T Calibration procedure for Bubble Gas Flow Meter General Measurement Device and Calibration Topics 3
D Calibration & Test Laboratory Non-Conformance Procedure Example wanted General Measurement Device and Calibration Topics 3
C Basic Internal Calibration Procedure to check the Accuracy of a Balance Calibration Frequency (Interval) 6
L Calibration Uniformity Procedure for AMS 2750 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
M Calibration Procedure for Gage Blocks General Measurement Device and Calibration Topics 10
C 21 CFR Part 820 - Question About Calibration Procedure Content Requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
L Pneumatic Torque Wrench Calibration Procedure Calibration and Metrology Software and Hardware 1
W Digital Multi-Meter Calibration Procedure for various Meter Brands and Functions General Measurement Device and Calibration Topics 7
W First Draft Micrometer Calibration Procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 19
S Is this procedure truly calibration? General Measurement Device and Calibration Topics 15
A Quality Procedure for 7.6 Calibration Question ISO 13485:2016 - Medical Device Quality Management Systems 6
C Calibration Procedure for Ammeter and Voltmeter wanted General Measurement Device and Calibration Topics 4
K Calibration Procedure for ID Micrometer Calibration & Extension Rods General Measurement Device and Calibration Topics 5
S QMS (Quality Management System) and Calibration Procedure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 20
R Documented Procedure for the Calibration of Pulse Current Monitors/Tranformers General Measurement Device and Calibration Topics 4
I Calibration Procedure for a Thermobalance Calibration and Metrology Software and Hardware 4
R Calibration Procedure for a MS8201H Mastech Multimeter General Measurement Device and Calibration Topics 6
M Sorvall 100S Centrifuge Calibration - SOP (Method and Procedure) Needed General Measurement Device and Calibration Topics 5
H Calibration Procedure Level of Detail - ISO Procedure question Document Control Systems, Procedures, Forms and Templates 8
L Calibration Procedure for Internal Spline Plug Gage Needed General Measurement Device and Calibration Topics 4
A Implementation of 820.72 and 820.120 - Problem with Calibration Procedure 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
2 TS 16949 Cl. 7.6.3.1 - Internal Calibration Procedure not Traceable to ASTM, EN etc. IATF 16949 - Automotive Quality Systems Standard 20
C Equipment Owner's Manual used for Calibration - Is it uncontrolled procedure? Document Control Systems, Procedures, Forms and Templates 15
R Environmental Controls Procedure for Calibration of Dimensional Gages General Measurement Device and Calibration Topics 3
T Advice regarding a Calibration Plan and Procedure wanted Calibration Frequency (Interval) 2
M Writing a Calibration Procedure for Groove Micrometers General Measurement Device and Calibration Topics 4
V Calibration Procedure for Thread Pitch Micrometer General Measurement Device and Calibration Topics 3
N Plan and Procedure for Calibration Laboratory Intermediate Checks General Measurement Device and Calibration Topics 2
V Calibration procedure for Torque Meter Needed General Measurement Device and Calibration Topics 6
K HI LO Set Masters for Thread Rings - Calibration Procedure General Measurement Device and Calibration Topics 17
S Calibration procedure wording ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 15
M Help writing a Radiometer Calibration Procedure General Measurement Device and Calibration Topics 3
C Gage pin calibration procedure for accurately calibrating gage pins General Measurement Device and Calibration Topics 18
B Pin Gage Calibration Procedure - ISO 17025:2005 accreditation requirements? ISO 17025 related Discussions 8
M Zebedee CL-100 Clarity Meter Calibration Procedure needed General Measurement Device and Calibration Topics 2
A Procedure for Calibration of Ovens, Baths and Furnance needed General Measurement Device and Calibration Topics 2
T Calibration of "Working" Tools in Calibration Procedure - ISO 9001:2000 General Measurement Device and Calibration Topics 11
J Calibration Procedure for Digi-Check style Height Gage General Measurement Device and Calibration Topics 5
I Procedure for Calibration of my Load Cell Testing Equipment - Needed General Measurement Device and Calibration Topics 5
J Sine Plate Calibration Procedure General Measurement Device and Calibration Topics 5
apestate Micrometer Calibration Procedure - Please critique General Measurement Device and Calibration Topics 20
R Auditor wants to know where our calibration procedure came from - TS16949 General Measurement Device and Calibration Topics 14

Similar threads

Top Bottom