Calibration Procedures in Gagetrak

J

jkittle

#1
Help!!

We use Gagetrak for our calibration software and it was not on a network system and the computer has crashed. I have a back up of our calibrations but the software had really nice calibration work instructions for gages (i.e. calipers, micrometers etc.) that we have lost. Does anyone use Gagetrak and have a copy of the work instructions or other calibration work instructions that they would be willing to share.


Thanks
 
Elsmar Forum Sponsor

CarolX

Super Moderator
Super Moderator
#2
Re: Calibration Procedures

Search the file attachment list for a copy of MIL-STD-120. The standard give a ot of calibration instructions for standard measuring equipment.
 
B

Benjamin28

#3
Re: Calibration Procedures

Hmm we do utilize GageTrak software, if you're suggesting that the software package came with work instructions, I don't recall ever seeing any with our software. Regardless we never utilized them if they did exist nor did we append our in-house calibration procedures into the software.

One would hope that if you were operating off of these documents in GageTrak you made master copies for back-up and kept them in your controlled documents system...failing that, there are a number of generic procedures available such as the attachment I'm posting.

I'm afraid that most users will have procedures that won't really be of much use to you however, as most procedures are custom tailored, referencing specific equipment, ranges of use, documents etc.

If the procedures did indeed come with GageTrak perhaps you could contact them to get additional copies?

Feel free to check the attachments list as well.
 

Attachments

B

Benjamin28

#6
Re: Calibration Procedures

Nah, actually I forget where I found it, here perhaps? I liked the fact that it covers a few different types of instruments though so I had saved a copy, would like to be able to give credit to the author but it was a while back that I found it and I just can't recall who published it.
 
T

Teri - 2011

#7
Re: Calibration Procedures

We also use gage trak, if you still have the software, you should be able to put the work instructions back in, without it affecting your records. If you don't have the software, let me know. I will try to upload them on here.
 
J

jkittle

#8
Re: Calibration Procedures

Unfortunately the software is long gone. The system has been in use for a very long time and people have come and gone and no one knows where any of the original software, manual etc. is.

We have atypical inspection lab and I can re-write the instructions I was just trying to save myself the time and trouble.
 

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#9
GAGETrak is really an interface program.....it runs Microsoft Access in the background.....if you have Access you may be able to get to the old fles without needing GAGETrak specifically.....no promises though.....
 
J

jstiles

#10
Hi....I need help in using certain parts of Gage Trak.....

I can do basic gage entry....but having trouble after that.....

thanks.....Joe
 
Thread starter Similar threads Forum Replies Date
F Standard Calibration Procedures: Recommended Practice ISO 17025 related Discussions 0
G ISO 17025 Calibration Laboratory Assessor's Common Questions and Procedures ISO 17025 related Discussions 11
M Where do I get the Calibration procedures of Department of Defense ? General Measurement Device and Calibration Topics 2
E Simple Calibration Procedures for Surftest SJ-400 General Measurement Device and Calibration Topics 6
K Updating Outdated Calibration Procedures Document Control Systems, Procedures, Forms and Templates 2
N Standard Calibration Procedures for various Measurement Devices General Measurement Device and Calibration Topics 3
L Identification, Labelling, Maintenence and Calibration Procedures wanted Document Control Systems, Procedures, Forms and Templates 1
C Updating our Laboratory Calibration / Verification Procedures IATF 16949 - Automotive Quality Systems Standard 5
D Calibration Procedures for Parallels and V Blocks Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
M Calibration Procedures for Inspection Equipment? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
T Calibration Procedures - ISO/IEC 17025, Clause 5.5.9 - Outsourced Calibration ISO 17025 related Discussions 10
Jerry Eldred Document Retention of Obsolete Calibration Procedures General Measurement Device and Calibration Topics 4
K Gage Calibration Procedures or Instructions Document Control Systems, Procedures, Forms and Templates 3
T In-house Calibration Procedures in our FAA Approved Repair Station Federal Aviation Administration (FAA) Standards and Requirements 11
W Can Calibration Procedures be uncontrolled? Document Control Systems, Procedures, Forms and Templates 2
M Control of Manufacturers Calibration Procedures General Measurement Device and Calibration Topics 8
D Validity of ISO 17025 calibration waivers due to proprietary procedures ISO 17025 related Discussions 4
V Calibration Procedures Needed General Measurement Device and Calibration Topics 6
apestate How are calibration procedures validated? General Measurement Device and Calibration Topics 3
E Quality Calibration Procedures - Frequency of equipment calibration - ISO 17025 ISO 17025 related Discussions 11
P Seeking Nationally and Internationally recognized Calibration Procedures General Measurement Device and Calibration Topics 7
C Guidelines on record retention of obsoleted calibration procedures (Revision History) Records and Data - Quality, Legal and Other Evidence 9
G ISO 9001:2000 Calibration Procedures for DMM/Oscilloscopes/Power Supplies General Measurement Device and Calibration Topics 12
T Survey - What is the demand of Pre-written/ready-to-use calibration procedures? General Measurement Device and Calibration Topics 14
T Threaded plug and ring gage calibration procedures General Measurement Device and Calibration Topics 4
T Difference between written calibration procedures and calibration work instructions? General Measurement Device and Calibration Topics 8
K Need of calibration procedures for sine plates, v-blocks, and parallel bars General Measurement Device and Calibration Topics 2
R Calibration Procedures - Government Industry Data Exchange Program (GIDEP) General Measurement Device and Calibration Topics 18
B Calibration of CNC Machines - Does anyone have written documentation procedures? General Measurement Device and Calibration Topics 2
Jerry Eldred Calibration Methods - Auditor wants federal or international calibration procedures? General Measurement Device and Calibration Topics 33
Jerry Eldred 4.10.6.5 Interpretation - Must Calibration Procedures be Published Internationally? General Measurement Device and Calibration Topics 1
M Calibration Procedures for checking and certifying micrometers and calipers General Measurement Device and Calibration Topics 3
Marc Standardization of Calibration Procedures General Measurement Device and Calibration Topics 0
lanley liao Question regarding the calibration of monitoring and measure equipment. Oil and Gas Industry Standards and Regulations 0
N IATF Calibration Lean in Manufacturing and Service Industries 3
Q Do these certificates of calibration meet ISO 9001 requirements for traceability to NIST? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
T Plug Gage Calibration Calibration and Metrology Software and Hardware 1
M Load Cell Calibration using a totalizer on a flow meter General Measurement Device and Calibration Topics 0
E Calibration Records needed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
D Limited Range Calibration - 5000 lb Industrial floor scale General Measurement Device and Calibration Topics 3
D Calibration of Small Scales General Measurement Device and Calibration Topics 26
C How to Establish the Calibration & Measurement Capability (CMC)? ISO 17025 related Discussions 1
I IQOQ or just initial calibration required? General Measurement Device and Calibration Topics 3
B Calibration in real life ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
J Calibration cycle for monitoring & measuring tools used in medical device manufacturing General Measurement Device and Calibration Topics 5
A Is calibration of test weight required General Measurement Device and Calibration Topics 4
S Calibration Frequency for Slip Gauge Kit used for CMM Calibration? General Measurement Device and Calibration Topics 0
S Calibration/Verification of customer fixtures IATF 16949 - Automotive Quality Systems Standard 6
Ron Rompen Calibration by manufacturer ISO 17025 related Discussions 4
Q Calibration verification records 7.1.5.2.1 IATF 16949 - Automotive Quality Systems Standard 2

Similar threads

Top Bottom