Calibration Services in the Midlands UK (Looking For)

#1
Hi. I am looking for a calibration service provider in the Midlands preferably (UK) for the following equipment. A bit of a mix so may need more than one.

• Pressure transducers
• Vernier/ callipers
• Digital Process Meters (Fluke)
• Digitron Digital Manometer
• Stanley Rulers
• Raytek ST Pro 80 Laser Thermometer
• Chauvin Arnoux F27 Clamp Multimeter
• Airflow PVM620 Micromanometer

Thanks
:)
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
M Calibration and Testing Laboratory Startup Consultation Services General Measurement Device and Calibration Topics 2
C How to state that Calibration Services & Equipment are Traceable to NIST General Measurement Device and Calibration Topics 5
E Should companies that perform calibration services be ISO 17025 accredited? ISO 17025 related Discussions 13
B Calibration Requirements in Organizations Providing Engineering Services General Measurement Device and Calibration Topics 5
S Check List for Vendors Supplying Calibration Services General Measurement Device and Calibration Topics 6
A Is Calibration Required for Equipment/Devices Used for Measuring Support Services General Measurement Device and Calibration Topics 6
C What are the Pitfalls of On-Site Calibration Services? General Measurement Device and Calibration Topics 6
A Help Locate Calibration Services in Thailand General Measurement Device and Calibration Topics 3
Marc 4.10.6 - Calibration services are conducted by a supplier's laboratory IATF 16949 - Automotive Quality Systems Standard 12
C Supplier Lab Requirements/Calibration Services QS-9000 - American Automotive Manufacturers Standard 3
O In 4.11 under Calibration Services states three ways of doing calibration QS-9000 - American Automotive Manufacturers Standard 4
J Qualifying Suppliers of Calibration Services General Measurement Device and Calibration Topics 12
G Tool tracebility and First calibration requirements for aerospace (AS9100) organisation AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
D Calibration of Digital thermometer with surface probe General Measurement Device and Calibration Topics 1
T Calibration or Verification -> Cm and Cmk, etc. Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
Q Quality Technician (calibration / metrology) - Memphis, TN Job Openings, Consulting and Employment Opportunities 1
G Is repeatability required for equipment calibration? General Measurement Device and Calibration Topics 10
was named killer AS 9100D - Calibration Instructions - Controlled documents? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
B Photovoltaic Tester Calibration General Measurement Device and Calibration Topics 0
B Temperature loop: partial calibration General Measurement Device and Calibration Topics 10
G Glass scale calibration at 74 degrees F? General Measurement Device and Calibration Topics 4
A Digital Timer Calibration Requirements General Measurement Device and Calibration Topics 3
Ron Rompen Barcode Verifier Calibration and Use Calibration and Metrology Software and Hardware 5
S Is Optical Parallel Set required calibration? ISO 17025 related Discussions 1
A Calibration of Power Supplies AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
D Calibration Process Flow Map Example Wanted General Measurement Device and Calibration Topics 3
M Calibration or Verification? What terminology to use ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
N Calibration Requirements for Production Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
S Calibration Equipment Selection General Measurement Device and Calibration Topics 2
D Sample Calibration SOP for ISO 13485 General Measurement Device and Calibration Topics 4
L Calibration of Plug Gauges - Tolerancing General Measurement Device and Calibration Topics 1
L In house calibration - Our CMM's are outside certified can I use them to certify our standards General Measurement Device and Calibration Topics 4
R Standard Filter for Calibration Colorimeter ISO 17025 related Discussions 1
J Documenting a Calibration Interval Extension Calibration Frequency (Interval) 7
F Calibration certificate content - Average Value and True Value ISO 17025 related Discussions 6
B Oscilloscope - AC gain calibration General Measurement Device and Calibration Topics 6
G Is it common to do a repeatability check during calibration of an instrument? General Measurement Device and Calibration Topics 5
A Adjustment of Calibration Intervals (Shortening or Lengthen) Calibration Frequency (Interval) 6
A Calibration required by OEM General Measurement Device and Calibration Topics 2
S ISO17020 - Equipment calibration requirement General Measurement Device and Calibration Topics 3
H Can a calibration lab still use ISO 6789:2003 as guide for torque calibrations Other ISO and International Standards and European Regulations 1
H Calibration of InfraRan Vapor Analyzer - where to get calibration for SF6 General Measurement Device and Calibration Topics 2
M How to read a calibration certificate for thermo hygrometer General Measurement Device and Calibration Topics 2
L Calibration Frequency for Surftest SJ-400 General Measurement Device and Calibration Topics 0
C External Laboratories and OEM Calibration IATF 16949 - Automotive Quality Systems Standard 0
V Ammeter calibration - Measuring head (on pic.) problem General Measurement Device and Calibration Topics 1
F How many signatures do we need on calibration certificates? ISO 17025 related Discussions 8
V Calibration certificate verification Qualification and Validation (including 21 CFR Part 11) 3
F Online courses - Metrology, standardization, calibration and ISO 17025 Training - Internal, External, Online and Distance Learning 3
A Calibration Certificate Results General Measurement Device and Calibration Topics 3

Similar threads

Top Bottom