Calibration Vendor for Wave Solder Optimizer/Profiler

K

kaptkirk

#1
I am a calibration tech in an electronics mfg co. and am interested in finding an accredited calibration vendor that can calibrate a wave solder optimizer/profiler....currently we use the Technology Information Corp. "Optimizer". Is there anyone that can do the ISO17025 cal of this or any other profilers?
 
Elsmar Forum Sponsor

somashekar

Staff member
Super Moderator
#3
Welcome to the Cove ~~~

wave solder optimizer/profiler
What does it consist of ?
Sensors and a thermometers...
A controller...
Can you get the sensor and thermometer part of it calibrated like any other to its working range, and then run a simple validation of the wave soldering.

Did you check with the manufacturer as well ?
 
Last edited:
#4
I am a calibration tech in an electronics mfg co. and am interested in finding an accredited calibration vendor that can calibrate a wave solder optimizer/profiler....currently we use the Technology Information Corp. "Optimizer". Is there anyone that can do the ISO17025 cal of this or any other profilers?
Since a wave soldering machine isn't a measuring device, what are you trying to have calibrated? Although I have a fair amount of experience of pth soldering on such a machine, I have yet to come across anything which needs calibrating. Perhaps you'd help us to understand what item off this equipment you want checked out.

You do have another option - to use a calibrated device as a comparitor when setting the equipment, but we'd have to know more first.
 
S

supreecha

#5
Since a wave soldering machine isn't a measuring device, what are you trying to have calibrated? Although I have a fair amount of experience of pth soldering on such a machine, I have yet to come across anything which needs calibrating. Perhaps you'd help us to understand what item off this equipment you want checked out.

You do have another option - to use a calibrated device as a comparitor when setting the equipment, but we'd have to know more first.
Calibration Vendor for Wave Solder Optimizer/Profiler

By use Calibrator (convert from Temp. to Current /or Voltage ) simulate into Reflow Profile .
For Wave Solder Optimizer/Profiler use guideline from JDEC -020 And/or supplier recommended(Data sheet).To be optimized KPIV & KPOV by DOE (RSM).
 
Thread starter Similar threads Forum Replies Date
P Calibration Vendor (Supplier) Performance and Expectations General Measurement Device and Calibration Topics 8
T Vetting a potential calibration vendor (supplier evaluation) General Measurement Device and Calibration Topics 7
Z Ring Gage Calibration Sizes Shrunk with New External Vendor (supplier) General Measurement Device and Calibration Topics 16
lanley liao Question regarding the calibration of monitoring and measure equipment. Oil and Gas Industry Standards and Regulations 0
N IATF Calibration Lean in Manufacturing and Service Industries 3
Q Do these certificates of calibration meet ISO 9001 requirements for traceability to NIST? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
T Plug Gage Calibration Calibration and Metrology Software and Hardware 1
M Load Cell Calibration using a totalizer on a flow meter General Measurement Device and Calibration Topics 0
E Calibration Records needed ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
D Limited Range Calibration - 5000 lb Industrial floor scale General Measurement Device and Calibration Topics 3
D Calibration of Small Scales General Measurement Device and Calibration Topics 26
C How to Establish the Calibration & Measurement Capability (CMC)? ISO 17025 related Discussions 1
I IQOQ or just initial calibration required? General Measurement Device and Calibration Topics 3
B Calibration in real life ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
J Calibration cycle for monitoring & measuring tools used in medical device manufacturing General Measurement Device and Calibration Topics 5
A Is calibration of test weight required General Measurement Device and Calibration Topics 4
S Calibration Frequency for Slip Gauge Kit used for CMM Calibration? General Measurement Device and Calibration Topics 0
S Calibration/Verification of customer fixtures IATF 16949 - Automotive Quality Systems Standard 6
Ron Rompen Calibration by manufacturer ISO 17025 related Discussions 4
Q Calibration verification records 7.1.5.2.1 IATF 16949 - Automotive Quality Systems Standard 2
B AS9100D 7.1.5.2 Calibration or Verification Method using outside cal lab AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
W Next Calibration Due Date Calibration Frequency (Interval) 5
S Where do l get calibration standards to run a calibration lab? Other ISO and International Standards and European Regulations 2
A OEM On-Site Calibration issues during Covid19 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
D Calibration tolerance question using Pipettes Medical Device and FDA Regulations and Standards News 1
M Calibration Certificate Result issued by an accredited external laboratory General Measurement Device and Calibration Topics 9
G Calibration of "Master Parts" Used as Gauges Calibration Frequency (Interval) 5
R Calibration lab environmental monitoring General Measurement Device and Calibration Topics 4
G Calibration of Rotronic probe but not digital readout? General Measurement Device and Calibration Topics 3
F Standard Calibration Procedures: Recommended Practice ISO 17025 related Discussions 0
T Temperature Requirements For In House Calibration - AS9100 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
Crimpshrine13 Laboratory Scope - Calibration vs. Test Methods - IATF 16949 IATF 16949 - Automotive Quality Systems Standard 3
Crimpshrine13 Calibration of pH Meter Probe Calibration and Metrology Software and Hardware 3
F ESD workbench "calibration" Manufacturing and Related Processes 2
C Correct Calibration Method for Dial Depth Gage General Measurement Device and Calibration Topics 6
F Nist traceable calibration certificates General Measurement Device and Calibration Topics 1
G Tool tracebility and First calibration requirements for aerospace (AS9100) organisation AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
D Calibration of Digital thermometer with surface probe General Measurement Device and Calibration Topics 1
T Calibration or Verification -> Cm and Cmk, etc. Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
G Is repeatability required for equipment calibration? General Measurement Device and Calibration Topics 10
was named killer AS 9100D - Calibration Instructions - Controlled documents? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
B Photovoltaic Tester Calibration General Measurement Device and Calibration Topics 0
B Temperature loop: partial calibration General Measurement Device and Calibration Topics 10
G Glass scale calibration at 74 degrees F? General Measurement Device and Calibration Topics 4
A Digital Timer Calibration Requirements General Measurement Device and Calibration Topics 3
Ron Rompen Barcode Verifier Calibration and Use Calibration and Metrology Software and Hardware 5
S Is Optical Parallel Set required calibration? ISO 17025 related Discussions 1
A Calibration of Power Supplies AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
D Calibration Process Flow Map Example Wanted General Measurement Device and Calibration Topics 3

Similar threads

Top Bottom