Can anyone tell me a little about AS9101?

Elsmar Forum Sponsor
C

Christian Lupo

#2
AS9101, I believe is PPAP for the aerospace sector. If you are not familiar with automotive PPAP --- PPAP (Production Part Approval Process)is a series of 15 documents suppliers must send their customer before shipping production quantities of their product.

AS9100 will also have sanctioned interpretations, just like QS-9000.
 
D
#4
Now that IS0 9000 : 2K is approved, anyone have an idea how quickly AS9100 : 2K will get the final approval?
 
#5
AS9100 rev 1? is supposed to be released mid 2001. This new revision is supposed to follow the ISO 9K2K format. The current version of AS9100 will co-exist along with AS9100 rev 1 until November of 2003.........so I am told.
 
#6
I just received a copy of AS 9101 (Quality System Assessment) from SAE. It reminds me of the QSA document that is the compliment to the QS 9000 (automotive/AIAG) standard. Some of the grammar is questionable where they have tried to re-phrase the requirements in the form of a question but I will use it as a guide to beef up our existing audit checklists in preparation for an AS 9100 cert audit. I don't think I will use it for its intended purpose......an actual audit checklist.

[This message has been edited by BadgerMan (edited 23 February 2001).]
 
S

Sdharding

#7
Does anyone know if there is a matrix to compare ISO9000:2000 and AS9100 (latest version)? I am trying to write a system that will comply with both. It will be easier if I have some comparison matrix!!
 
#8
Originally posted by Sdharding:
Does anyone know if there is a matrix to compare ISO9000:2000 and AS9100 (latest version)? I am trying to write a system that will comply with both. It will be easier if I have some comparison matrix!!
AS9100 is supposed to be revised so it shares the same outline as ISO 9K2K, so I am told. I do not know the status of this revision though. The original version of AS9100 is/was twenty elements just like ISO 9001:1994. There is a cross reference matrix (ISO 9K2K to ISO 9001:1994) in ISO/Committee Draft 1 9001/2000 that would be a good starting point. Once the new version of AS9100 becomes available, a matrix should no longer be needed.
 
Thread starter Similar threads Forum Replies Date
G Can anyone tell me about Tooling FMEA FMEA and Control Plans 3
R Can anyone tell me requirements standards for insufflator? Other Medical Device Related Standards 1
A Can anyone tell how do we do inprocess inspection of raw materials Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
F AS 9110 Accreditation - Can anyone tell me what to expect? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
B VDA 4902 - Can anyone tell me what this is? Various Other Specifications, Standards, and related Requirements 5
A Has anyone heard of "drop gauge policy"? If so, can you tell us what it means? General Measurement Device and Calibration Topics 17
K Could anyone tell me what is relation / difference in Cpk and Ppk Capability, Accuracy and Stability - Processes, Machines, etc. 4
K Short run Z-bar & W charts - Can anyone tell me the formula used? Statistical Analysis Tools, Techniques and SPC 9
T Continuous Improvement - Can anyone tell me how are you using the CI? Forms? IATF 16949 - Automotive Quality Systems Standard 3
C Sampling Plan (ANSI/ASQC Z1.4) - Can anyone tell me how it is made? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
J Can anyone tell me how Y2K is such a big deal? After Work and Weekend Discussion Topics 1
A Does anyone have a checklist of API Spec 650 13th Edition? Oil and Gas Industry Standards and Regulations 0
P Does anyone have a API Q1 Documentation Package? Quality Management System (QMS) Manuals 1
J Does anyone have an excel IATF 16949 Internal Audit checklist I could use? IATF 16949 - Automotive Quality Systems Standard 7
Watchcat Anyone had an MDR technical file review/audit yet? EU Medical Device Regulations 13
S Anyone Familiar with "SPC for Excel" add-in? Lean in Manufacturing and Service Industries 4
M Has anyone has been through an MDR audit? (3/2020) EU Medical Device Regulations 1
M Has anyone heard of Run at Risk? Manufacturing and Related Processes 14
C Document Control Stamps - Does anyone still stamp their documents? Document Control Systems, Procedures, Forms and Templates 24
B ASA Aviation Supply Association - Has anyone heard of ASA? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 1
B Has anyone done an IEC 60601-1 gap analysis to IEC 60335? Medical Device and FDA Regulations and Standards News 4
D Has anyone had sudden challenges from Korea-MFDS? Other Medical Device Regulations World-Wide 1
MDD_QNA QR Code Standard ISO/IEC 15417:2007 - Does anyone use it? Other Medical Device Related Standards 3
F Hi friends, can anyone show me an example of a procedure for ISO 13485 6.4.1 Work Environment? ISO 13485:2016 - Medical Device Quality Management Systems 2
W Does anyone have an API Q2 checklist for internal auditing? Oil and Gas Industry Standards and Regulations 1
Ronen E Can anyone please explain this? (510k submission requirement) Other US Medical Device Regulations 14
GreatNate Metrotom - Does anyone have any exposure to the Zeiss Metrotom 800 or 1500? Manufacturing and Related Processes 0
D FDA Biomarker Qualification Program - Has anyone prepared an application? Medical Device and FDA Regulations and Standards News 0
T Is anyone working with N299.1 (Supply/service to nuclear power plants)? Various Other Specifications, Standards, and related Requirements 0
GreatNate QMS in SharePoint - Is anyone doing this? Manufacturing and Related Processes 8
M Honda Audits - Does anyone have any experience with the QAV audit? General Auditing Discussions 4
G Anyone working with or planning to do business in the CBD (cannabidiol) industry? US Food and Drug Administration (FDA) 1
L Has anyone heard of the 2 pan system? Manufacturing and Related Processes 6
Q Does anyone have experience implementing a QMS without ISO certification? Quality Manager and Management Related Issues 2
J Does anyone here use ISOXpress/IMSXpress QMS software? Software Quality Assurance 11
K Does anyone have a copy of a GM 5 Phase Problem solving form Problem Solving, Root Cause Fault and Failure Analysis 1
M Has anyone here assessed the latest Abbreviated 510(K) guidance document? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
M Does anyone has a good verification and validation plan template? ISO 13485:2016 - Medical Device Quality Management Systems 3
D Has anyone undergone a BARDA (HHS) audit as part of their grant process? Other Medical Device Regulations World-Wide 0
QIE Anyone have experience with BPA Quality (QMS system based on Office365/Sharepoint) Quality Assurance and Compliance Software Tools and Solutions 1
M AMS0320 - Electro-deposition of zinc - Anyone come across this spec? AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 4
M Anyone Dropping IATF and going back to ISO ? IATF 16949 - Automotive Quality Systems Standard 18
Sidney Vianna LinkedIn bug - Anyone has any idea of how to fix this? Posts not showing for me in a Group feed. Coffee Break and Water Cooler Discussions 2
R Anyone who can share a checklist for ISO 29134? IEC 27001 - Information Security Management Systems (ISMS) 7
B Does anyone charge for annual layouts? APQP and PPAP 8
C Will anyone please share training material for ISO:13485:2016 for best practices Training - Internal, External, Online and Distance Learning 0
K Has anyone used QAI for training? Training - Internal, External, Online and Distance Learning 7
N Does anyone know a registrar that offers both ISO 9001 and ISO 17020? Registrars and Notified Bodies 6
W Does anyone have any experience with the Easy Metric System? General Measurement Device and Calibration Topics 2
J Does anyone have a good APQP template that meets IATF requirements? APQP and PPAP 3
Similar threads


















































Top Bottom