SBS - The best value in QMS software

Can assembly manufacturing sub-supplier be certified IATF 16949?

S

sistoiv

Involved In Discussions
#1
#1
Good morning.
Do you confirm to me that a subsupplier which carries out only assembly/mounting (and test/inspection) processes can be certified IATF 16949?
Starting from parts owned by customers supplied from customers and finished commercial parts purchased from subsupplier (often by customer's specification), this subcontractor (very little familiar enterprise) assemblies and tests automotive products, on behalf of customers (outsourcing).
No "production" process is performed: only assembling, packaging and obviously checking. Almost always this subsupplier directly ships to customer of its customers (that's tier 2).
Thanks.
 
Quickly Organize an Intelligent TDP from DISCUS
Elsmar Forum Sponsor
H

Hendor

Involved In Discussions
#2
#2
I think if we see Object 1.1 in IATF and the scope says:

This automotive QMS standard defines the quality management system requirements for the design and development, production and, where applicable, assembly, installation and after-sales service of automotive industry products, including products with embedded software ...

So I think it may be applicable!
Luck
 
S

sistoiv

Involved In Discussions
#6
#6
Johnnymo62 said:
I don't understand how assembly is NOT production. I thought assembly IS one type of production. Am I missing something?
Click to expand...
I putted quotation marks, meaning "machining" or similar. Mounting/assembly/installing are manufacturing, obviously.
Also packaging, inspection, repair, rework, ...
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M Change in Manufacturing, Assembly and Testing Location to a Sub-Contractor 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 6
J What is Incorporation in Assembly/Manufacturing Process in FMEA? FMEA and Control Plans 4
C Severity of Effect on Process (Manufacturing/Assembly Effect) Scrap or Reworking FMEA and Control Plans 3
P Is PFMEA for Manufacturing and Assembly Processes Only? FMEA and Control Plans 11
P How to implement DFMA (Design for Manufacturing and Assembly)? Lean in Manufacturing and Service Industries 6
J DFA (Design for Assembly) & DFM (Design for Manufacturing) - Seeking Templates Document Control Systems, Procedures, Forms and Templates 4
T ISO 13485 - Assembly instructions written vs. online ISO 13485:2016 - Medical Device Quality Management Systems 5
C In-process inspection - Tooling and assembly lines for automotive companies AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
R DFA & DFM - Examples for Design for assembly and design for manufacturability Lean in Manufacturing and Service Industries 2
S Process Inspection -Sub assembly process inspection sheet Lean in Manufacturing and Service Industries 3
M AS9102B Detail Part/Assembly FAI Form 1 box 13; AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
D Using non-conforming components even though the final assembly is conforming? Manufacturing and Related Processes 5
D AS9102 - Assembly FAI for Use As Is or Repaired Parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
O Identifying KPI for AS9100 8.1.4 - Prevention of Counterfeit Parts - PCB assembly contract manufacturer AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16
I PPAP Assembly and Components Manufacturing and Related Processes 3
Marc Quiz - Where did the idea of an assembly line come from? Coffee Break and Water Cooler Discussions 4
D How about another torque discussion? Assembly processes General Measurement Device and Calibration Topics 9
D Yet another torque question... Assembly processes AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
M Informational IMDRF final document – Assembly and Technical Guide for IMDRF Table of Contents Submissions Medical Device and FDA Regulations and Standards News 4
P NCMRs on in-proccess rejections - Products that fail during assembly ISO 13485:2016 - Medical Device Quality Management Systems 2
C Design for Assembly in DFMEA - Failure Effect of Sub-System(s) FMEA and Control Plans 5
S Assembly House Process Chart ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
L AS9102 Form 1 Section 13 Detail or Assembly Question AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
J Facilities - Placing our assembly group into a separate building ISO 13485:2016 - Medical Device Quality Management Systems 8
G Assembly of cells into battery - Medical Devices IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
F Quality checks for pressurized hydraulic hose assembly Manufacturing and Related Processes 5
F CpK on a manufactured assembly? Reliability Analysis - Predictions, Testing and Standards 7
M Establishing a FTQ (First Time Quality) process for an engine assembly line Quality Tools, Improvement and Analysis 1
Q Is it acceptable to mix components from two different lots into an assembly? ISO 13485:2016 - Medical Device Quality Management Systems 1
S Does the cable assembly supporting a medical device gets classified accordingly? US Food and Drug Administration (FDA) 1
JoCam Medical Device Final Assembly Labelling EU Medical Device Regulations 2
M FAI Requirements of Detail and Assembly AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
D Ideas for Poka Yoke or Improvement - Aluminum FOD in Assembly Customer Complaints 3
N DFMEA, Drawings and PFMEA of an Assembly Process FMEA and Control Plans 12
Q Practical Way to raise NCR's in an Assembly Workshop ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
Tagin Can/should SPC be applied to Computer Assembly and Software Imaging? Statistical Analysis Tools, Techniques and SPC 8
S AS9102 - Clarification - PO asking for an Assembly at Rev B (Print at Rev C) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
M Manufacture/Assembly Contamination Assessment Other Medical Device and Orthopedic Related Topics 5
K ESD Protection in the Assembly Bay ISO 13485:2016 - Medical Device Quality Management Systems 9
M mtbf (mean time between failures) calculations of an assembly Reliability Analysis - Predictions, Testing and Standards 10
G Service Parts Assembly Line and Scope of TS16949 Registration IATF 16949 - Automotive Quality Systems Standard 3
K Is an assembly service, part sequencing, and kitting operation Qualified for TS 16949 IATF 16949 - Automotive Quality Systems Standard 1
Q Form IPC 1720A Assembly Qualification Profile still required? Various Other Specifications, Standards, and related Requirements 1
alonFAI Component Failure (Relay) during ICT Testing after Surface Mount Assembly Manufacturing and Related Processes 5
L IMDS for a Part of a Multi-Part Assembly? RoHS, REACH, ELV, IMDS and Restricted Substances 10
T Work Instructions for Assembly vs. Disassembly Misc. Quality Assurance and Business Systems Related Topics 11
S Can you help improve assembly process? Manufacturing and Related Processes 14
O Changes to Component Parts within an Assembly AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Implementing ISO 9001 in an Assembly Plant ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
S Product Registration - Assembly Drawings Japan Medical Device Regulations 7

Similar threads

Top Bottom