Can I conduct Internal Audit for combined ISO 9001, ISO 13485 and ISO 14001?

#11
I am struggling with a similar issue as Jennifer. I work for a small company that we are currently ISO9001/AS9100 and ISO13485 registered and certified to. Every year we have gotten by on our internal audits and every year they say they could be better.
Who is "they" and how is the "could be better" reported? Tell me how often do you perform internal audits?
 
Elsmar Forum Sponsor
Q

qmshotpeen

#12
In my opinion the objective is to make we are doing everything according to our procedures be it contract review, purchasing, non conformance. I think that we need to take our procedures and pick a job and say ok in order to start this job what did we need to do first? did we need to order material, yes so lets look at purchasing - and then go through that procedure and make sure we followed all the steps in there in order to purchase the material and so on.
 
Q

qmshotpeen

#13
Andy -

They = auditors and it is usually verbally reported because we are compliant in the fact that we are doing them and doing each element as required and we do have quality objectives but we are just sliding by.

My internal audit schedule is broken out by month and element. So each month 1 or 2 elements of the standard is audited. So for February I had to audit 5.1, 5.2, 5.3, March 5.4, 5.5, 5.6, April 4.1 & 4.2 and so on.
 
#14
In my opinion the objective is to make we are doing everything according to our procedures be it contract review, purchasing, non conformance. I think that we need to take our procedures and pick a job and say ok in order to start this job what did we need to do first? did we need to order material, yes so lets look at purchasing - and then go through that procedure and make sure we followed all the steps in there in order to purchase the material and so on.
You could, but what's the point? An audit doesn't HAVE to be a system wide audit and what you describe looks like that - what an external auditor might do.

Do you have clearly defined audit scope(s) and criteria? BTW - it might be your opinion as to why you're doing the audit, but - as John suggests - unless management also have the same objective(s) in mind, you are going to fall down very quickly!
 

John Broomfield

Staff member
Super Moderator
#15
In my opinion the objective is to make we are doing everything according to our procedures be it contract review, purchasing, non conformance. I think that we need to take our procedures and pick a job and say ok in order to start this job what did we need to do first? did we need to order material, yes so lets look at purchasing - and then go through that procedure and make sure we followed all the steps in there in order to purchase the material and so on.
Shotpeen,

As auditor you do not decide on the objectives of your audit programme.

Once top management have determined their objectives you can, however, make sure that every audit you do contributes to the fulfillment of the audit programme's objectives.

You can then scope or design your audits so they fulfill their audit objectives.

Please get the objectives from top management.

John
 
#16
Andy -

They = auditors and it is usually verbally reported because we are compliant in the fact that we are doing them and doing each element as required and we do have quality objectives but we are just sliding by.

My internal audit schedule is broken out by month and element. So each month 1 or 2 elements of the standard is audited. So for February I had to audit 5.1, 5.2, 5.3, March 5.4, 5.5, 5.6, April 4.1 & 4.2 and so on.
Which auditor? Internal? CB? Customer?

While it's NOT a requirement, doing "element" audits like this doesn't tell you or - crucially - management, anything of any importance/use. It could take many months to link a finding in one element to another. You *should* be doing them by process. Did you get this approach from any training?
 
Q

qmshotpeen

#18
This is what our External CB auditors have been telling us. They told us that EACH element needed to audited once at a min once a year. This is supposed to be black and white and there is so much room for interpretation. Its very frustrating. My top managements objectives are to pass the audit, meet the requirements of the standards and maintain our certification.
 
#19
This is what our External CB auditors have been telling us. They told us that EACH element needed to audited once at a min once a year. This is supposed to be black and white and there is so much room for interpretation. Its very frustrating. My top managements objectives are to pass the audit, meet the requirements of the standards and maintain our certification.
Firstly, your CB auditor is totally incorrect and it's total rubbish. If it isn't in ISO 9001 (and it isn't) and you haven't written it into your procedure for audits, then IGNORE what your CB auditor is telling you - better still, tell your CB management that the auditor is going above ISO 9001 requirements (if you haven't got it in your procedure) and you don't want them back!

There's little to no "interpretation". There's what the standard says, and not what auditors tell you! In the standard you are allowed to audit what you want - to demonstrate the management system complies and is effective. Element audits don't tell you very much, really. Have you had training from a reputable provider?
 
Q

qmshotpeen

#20
I guess when I say interpretation I mean auditor preference. I got my training from our CB agency. Probably need to attend another class somewhere else. :) - this has all been very helpful information for me to bring back to management however I know the response, it is going to be - just do the audits as we state in our manual which we changed to state that each element would be audited a min of once a year because the auditor wanted it that way.
 
Thread starter Similar threads Forum Replies Date
P Can internal ISO 17025 Auditor conduct ISO 9001 Audit ISO 17025 related Discussions 7
Q Tips on how to conduct a good Internal Audit Opening Meeting Internal Auditing 19
J How to Write the Planned Interval to Conduct Internal Audit, Management Review, etc.. ISO 13485:2016 - Medical Device Quality Management Systems 3
V How many years of experience is needed to conduct the internal audit in my company? General Auditing Discussions 4
A Do we have to conduct tests during internal audit of ISO 17025:2005? ISO 17025 related Discussions 8
M How to conduct the first ISO 9001:2000 Internal Audit Internal Auditing 11
E To conduct ISO 17025 Internal Audit - Auditor Requirements ISO 17025 related Discussions 10
D How to Conduct a TS 16949 Internal Audit - Can I Use a Check List? Internal Auditing 10
M Knowledge of test methods in order to conduct an internal audit to ISO 17025? ISO 17025 related Discussions 3
J ISO 9001:2008 - Can I still conduct Internal Audits in my company? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
R How do I conduct my API Q1, ISO compliant internal audits? Internal Auditing 1
C When is the Best Time to Conduct Internal Audits Internal Auditing 22
Sidney Vianna Can CB's (certification bodies) conduct internal and 2nd party audits? Registrars and Notified Bodies 12
G How to conduct internal audits? Internal Auditing 52
J Internal auditor conduct, unbecoming an auditor... General Auditing Discussions 19
A Does anyone conduct opening & closing meetings for their internal audits? Internal Auditing 19
S Requirement to Conduct New Shelf-life Testing? (re-do testing for design change) EU Medical Device Regulations 3
M Informational US FDA Draft Guidance – Patient Engagement in Design and Conduct of Medical Device Clinical Investigations Medical Device and FDA Regulations and Standards News 0
B Is it necessary to conduct product audit of entire product which is manufactured in the company as per IATF IATF 16949 - Automotive Quality Systems Standard 4
C How frequent to conduct Clinical / Performance Evaluation? CE Marking (Conformité Européene) / CB Scheme 4
S Script of R software to conduct Nested GRR for Destructive Testing Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
S CMDCAS ISO13485 - Bilateral agreement with SAI global to conduct Certification Audits ISO 13485:2016 - Medical Device Quality Management Systems 7
S Conduct Customer Satisfaction Survey for every submitted Bid? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
T Conduct a fractional factorial 2^13-5 experiment with Minitab Using Minitab Software 4
M Help me understand how to conduct a Chi Square Test Statistical Analysis Tools, Techniques and SPC 3
N How do I conduct Management Review Meetings? Management Review Meetings and related Processes 34
R Can our Supplier's Quality Mgr. conduct Supplier Audit on behalf of manufacturer? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
F Tips, Guidelines and Checklist to conduct Audit of Supplier & Subcontractor Document Control Systems, Procedures, Forms and Templates 5
L How to conduct a Quality Audit based on ASME BPVC VIII-1 requirements Various Other Specifications, Standards, and related Requirements 4
Y FDA - Does anyone have conduct the validation on GR&R worksheet before? Qualification and Validation (including 21 CFR Part 11) 7
I Code of Ethics and Conduct wanted Document Control Systems, Procedures, Forms and Templates 3
D How to conduct a Gage R&R on DC Tools to Torque Bolts Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
G How to conduct a Toy Recall (College Question) Customer and Company Specific Requirements 2
N How do I conduct Risk Management for my company? ISO 13485:2016 - Medical Device Quality Management Systems 7
K How to conduct a QCC project Misc. Quality Assurance and Business Systems Related Topics 2
N Tyvek Pouch Seal - Pressure needed to conduct Vacuum Seal Leak test? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
R How to conduct the Threshold Test of Mobile Equipment specified in 3rd edition? IEC 60601 - Medical Electrical Equipment Safety Standards Series 35
S How to conduct Capability Analysis for this data? Statistical Analysis Tools, Techniques and SPC 12
K Can auditors freely conduct confidential interviews, or consent is necessary? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 22
P How to conduct ILCP (inter-laboratory comparison programme) to get ISO 17025 ISO 17025 related Discussions 3
M Do we need to conduct Vendor (Supplier) Evaluation? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 17
K When, whom, how to conduct hazard analysis of PRP?s, OPRP?s and CCP?s? Food Safety - ISO 22000, HACCP (21 CFR 120) 1
S Can a suspended CB still conduct Surveillance Audits? Registrars and Notified Bodies 4
J My mentors insist I use hotel's employee manuals and codes of conduct for my... Service Industry Specific Topics 3
somashekar Sustainability audit per EICC Supplier Code of Conduct Sustainability, Green Initiatives and Ecology 14
Marc Apple Enforces "Supplier Code of Conduct" After Child Labor Discovery After Work and Weekend Discussion Topics 13
B How to Conduct a Review of Customer Order (Contract Review)? Contract Review Process 5
M ISO 17025 Audit check list to conduct horizontal and vertical audits ISO 17025 related Discussions 10
D How to practically-conduct, post production phase ISO 13485:2016 - Medical Device Quality Management Systems 1
S Multilevel Design in Minitab to conduct a DOE - 4 factors and each has 5 levels Design and Development of Products and Processes 4

Similar threads

Top Bottom