Certification Agency (Company) for BS 15000 - Now ISO 20000

V

venkat - 2011

#1
Dear Sir

I would like to know the certification agency for BS 15000 and also the approximate cost for certification.

I have seen the general clauses in the site bs15000.org. What I am looking for is the full set manual complying to each clauses mentioned in the standard

Viewers can anyone help, please

venkat
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Staff member
Admin
#2
Sorry I can't help here, Venkat. It is good to see you back at the forums!
 
V

venkat - 2011

#3
This standard is for managing IT services. The other standard is ISO 17799 and equivalent is BS 7799.

The grapewine is that the BS 15000 standards are going to change in November'2002. It is going on split into two- BS 15000-1 and BS 15000-2 and also PD 005 and PD 015 are to be complied.

Any help from viewers please
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#4
venkat said:
Dear Sir

I would like to know the certification agency for BS 15000 and also the approximate cost for certification.

I have seen the general clauses in the site bs15000.org. What I am looking for is the full set manual complying to each clauses mentioned in the standard

Viewers can anyone help, please

venkat
BS15000 is slowly making ground in the IT World.

http://www.bs15000certification.com/lookuplist.asp?Type=6
 
J

jadimaria

#5
BS 15000 Certification

BSI Management Systems wrote the BS 15000 Std. This is a pure IT std based on ITIL practices.
There is an upgrade path from ISO 9001:2000. The cost is based on the required number of days which is based on the number of people in your organization. Typically they will follow Guide 62 guidelines for ISO 9001 and add 1 or 2 days. BSI is one of the main CB for certification. As far as I know they are the only CB with Certified Auditors in the US.
Other CB are accedited but have no "local" auditors at this time. So far inquiries have been low.

The STD can be purchased at www.basiamericas.com

There are free downloads of BS 15000 information on the BSI website.

I have performed compliance audits to BS 15000 and it is excellent for IT or data Centers.
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#7
Yes, but you can correct two things:
  • the BSI Americas webpage is mispelled
  • BS15000 was probably written by BSI, not BSI MS. BSI MS is a Registrar, related body of BSI, the Standard Development Group
Let us know.
BS 15000 - Helping the "HELPLESS" DESKS of the World.:lol:
 

Randy

Super Moderator
#8
You're correct Sidney, BSI is the standards body for the UK and wrote BS15000.

The address for BSI Management Systems (Yeah! Chears! :applause: ) is www.bsiamericas.com

Both training and registration services are offered as is the standard (for a fee of course)
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#9
BS15000 inflating into ISO 20000

http://www.ukas.com/news/2005/ISO20000_IT_Service_Management.asp

Applications invited for accreditation for certifying to ISO 20000 Standard, IT Service Management
BS 15000 is to be replaced by ISO 20000 on 5 th December 2005. Applications are now invited from certification bodies wishing to provide accredited certification for ISO 20000.
ISO20000 promotes the adoption of an integrated process approach to deliver effectively managed IT services to meet business and customer requirements.

UKAS expects to run a pilot assessment programme for applicants, aiming to complete within a given timeframe, to be established following consultation with interested parties, but likely to be concurrent with the period for the transition from BS15000 to ISO 20000. To be considered for inclusion in the UKAS pilot assessment we will need to receive applications and accompanying documentation by March 31st 2006. The pilot programme may include desk-top reviews, head office assessments, witnessed assessments and/or other assessment techniques as determined through contract review.
Details of the anticipated pilot assessment programme will be provided to applicant organisations by April 2006.
Applications should be made using the form AC1 for existing UKAS accredited organisations, New applicants to accreditation should also complete a General application form. All forms should be accompanied with quality system documentation and the appropriate application fee and forwarded to:
Nicola Campbell
Development - Customer Liaison Officer
Untied Kingdom Accreditation Service
21-47 High Street
Feltham
Middx
TW13 4UN
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#10
Iso 20000

http://www.iso.org/iso/en/commcentre/pressreleases/2005/Ref985.html
Ref.: 985
15 December 2005
ISO/IEC 20000 benchmarks provision of IT service management

With up to 80% of information technology budgets of most organizations directly linked to service management processes, a new ISO/IEC standard that benchmarks this activity is expected to result in cost savings for users, whether large or small enterprises, as well as increased productivity and improved customer service.

Published by ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission), ISO/IEC 20000 will enable organizations to benchmark their capability in delivering managed services, measuring service levels and assessing performance.
Today, IT service providers are under sustained pressure to deliver high quality service at minimum cost. Concerns have been raised that IT services, whether provided by an in-house IT department or an external organization, are not aligned with the needs of the business and its customers. ISO/IEC 20000 will reduce operational exposure to risk, meet contractual and tendering requirements, demonstrate service quality and deliver best value.
The implementation of ISO/IEC 20000 will ensure proactive working practices able to deliver high levels of customer service to meet their business needs.
"Organizations will reap major business and financial benefits by ISO/IEC 20000 adoption," explains François Coallier, Chair of ISO/IEC group that approved the standard. "These service management processes deliver the best possible service to meet a customer’s business needs within agreed resource levels, i.e. service that is professional, cost effective and with risks that are understood and fully managed."
ISO/IEC 20000:2005, which is issued in two parts under the general title, Information technology - Service management, will enable service providers to understand how to enhance the quality of service delivered to their customers, both internal and external.
  • Part 1: Specification provides requirements for IT service management and is relevant to those responsible for initiating, implementing or maintaining IT service management in their organization.
  • Part 2: Code of practice, represents an industry consensus on guidance to auditors and assistance to service providers planning service improvements or to be audited against ISO/IEC 20000-1:2005.
ISO/IEC 20000 integrates the process-based approach of ISO's management system standards – ISO 9001:2000 and ISO 14001:2004 – including the Plan-Do-Check-Act (PDCA) cycle and requirement for continual improvement.
Organizations that so wish can have their IT service management systems independently certified as conforming to the requirements of ISO/IEC 20000.
The new standard is based on the British Standard BS 15000 and is integrated into ISO and IEC collection of software and systems engineering standards.
ISO/IEC 20000-1:2005 costs 81 Swiss francs and ISO/IEC 20000-2:2005 costs 124 Swiss francs. They are available from ISO national member institutes (see the complete list with contact details) and from ISO Central Secretariat (see below).
For more information:
Dr. Jenny Dugmore
Project Editor of ISO/IEC 20000
Tel: +44 (0)20 7834 2000
Fax: +44 (0)20 7834 4304
E-mail: [email protected]

ISO Store: To order
ISO/IEC 20000-1:2005, Information technolgy - Service management - Part 1: Specification
ISO/IEC 20000-2:2005, Information technolgy - Service management - Part 2: Code of practice

Enquiries about orders:
Ms. Sonia Rosas Friot
Marketing Services
Tel. +41 22 749 03 36
Fax +41 22 749 09 47
E-mail [email protected]
Press contact:
Ms. Elizabeth Gasiorowski-Denis
Journalist and Editor, ISO Focus
Public Relations
Tel. +41 22 749 01 11
Fax +41 22 733 34 30
E-mail [email protected]
 
Thread starter Similar threads Forum Replies Date
H R&D Lab ISO 9001 certification ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
L Significant subcontractor update, still under MDD Certification, possible? CE Marking (Conformité Européene) / CB Scheme 3
B ISO 13485 Certification ISO 13485:2016 - Medical Device Quality Management Systems 2
S How to calculate Effective Number of People for ISO 13485 Certification? General Auditing Discussions 2
S Inventory prior to AS9120 certification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
P Certification process for registered device China Medical Device Regulations 11
F Medical cart self certification EU Medical Device Regulations 1
B Managed Certification Projects FAA vs EASA EASA and JAA Aviation Standards and Requirements 0
B Regulatory Affairs Certification (RAC) Book - Fundamentals of Medical Device Regulations Medical Device and FDA Regulations and Standards News 0
B IATF Certification Body Recommendations Registrars and Notified Bodies 3
C Certification vs Accreditation Training (General) Training - Internal, External, Online and Distance Learning 1
I Class VI certification on seals, o-ring and plastic for a WFI system Qualification and Validation (including 21 CFR Part 11) 0
G Trying to get a financially reasonable ISO Certification Body Registrars and Notified Bodies 8
A Selling products with OEM certification expired EU Medical Device Regulations 0
G ISO 13485 Certification - Can we get the ISO 13485 certification prior to shipment of the device? ISO 13485:2016 - Medical Device Quality Management Systems 6
N Does anyone use SGS for ISO 13485 / CE certification Registrars and Notified Bodies 0
S Clean room not part of my certification ISO 13485:2016 - Medical Device Quality Management Systems 3
J EC Certification transfer from CMO to Legal Manufacturer Possible? CE Marking (Conformité Européene) / CB Scheme 0
A Can a organization use a disclaimer "pending AS9100 Certification" in Marketing Information? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
S Certification Body Changeover - Transfer of Certificate Registrars and Notified Bodies 9
N Traditional 510K Submission-Financial Certification or Disclosure Statement 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 6
J Quality Objective for QMS prior to Certification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
J Where to get a Black belt certification ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 13
D ISO 13485 & CE Certification for Surgical Gloves CE Marking (Conformité Européene) / CB Scheme 0
K MDR Class 1 Self Certification - Competent Authority or Notified Body? EU Medical Device Regulations 6
R GMDN and UMDNS Codes certification EU Medical Device Regulations 0
M ISO 13485:2016 Certification Scope ISO 13485:2016 - Medical Device Quality Management Systems 3
R IATF 16949 Certification for new site with transferred product--what is the impact with CSR and scorecards? IATF 16949 - Automotive Quality Systems Standard 4
B IATF 16949 Cert Expire- New certification body IATF 16949 - Automotive Quality Systems Standard 5
C Budgetary cost to obtain ASME NQA-1 Quality Program Certification Quality Management System (QMS) Manuals 0
V Certified Auditor - Need of additional certification specific to industry ( GMPs) ASQ vs ECA vs others Professional Certifications and Degrees 1
Le Chiffre Online training available for ISO/IEC 17021-1: Requirements for bodies providing audit and certification of management systems Training - Internal, External, Online and Distance Learning 3
B Cybersecurity Maturity Model Certification for military customers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
M Scope for ISO 13485 Certification of a Translation Service Provider ISO 13485:2016 - Medical Device Quality Management Systems 17
A ISO 13485 Certification for Resin Manufacturer ISO 13485:2016 - Medical Device Quality Management Systems 4
X ISO 17025 certification for Laboratory for online gambling products ISO 17025 related Discussions 3
N 93/42/EEC certification without ISO 13485 EU Medical Device Regulations 3
V New Product Model CE Mark Certification under MDR EU Medical Device Regulations 0
H What ISO certification is for an IT department? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
P ISO 9001 certification with zero customers? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
E ISO 13485 QMS certification as a Supplier ISO 13485:2016 - Medical Device Quality Management Systems 8
G IATF Rules for COVID 5th revision - Re-certification audit timing IATF 16949 - Automotive Quality Systems Standard 3
J New Job Position - Achieving ISO 13485 Certification ISO 13485:2016 - Medical Device Quality Management Systems 5
M ISO 13485-2016 online certification ISO 13485:2016 - Medical Device Quality Management Systems 3
K USB VID/PID certification Various Other Specifications, Standards, and related Requirements 2
L IATF 16949 certification costs IATF 16949 - Automotive Quality Systems Standard 3
J How much to charge for helping a startup company with initial ISO 13485 certification? Consultants and Consulting 3
R Medical Device Software Certification IEC 62304 - Medical Device Software Life Cycle Processes 1
R China Quality Certification Various Other Specifications, Standards, and related Requirements 1
S Requirements to obtain ISO 50001 Certification ISO 14001:2015 Specific Discussions 2

Similar threads

Top Bottom