Classifying Characteristics

O

omolina

#1
Hi, my name is Ovidio and I work for a steel company in México. One of our customers has designated some product characteristics as Security Characteristics in his specifications. We know that we have to identify them in our fmea's, control plan´s and such stuff but what additional treatement is needed for security characteristis (if any) besides documentative and statistical (cpk's) ?

Thanks.

OMC
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
I have never heard of a 'security' characteristic. In the automotive world each company has many 'characteristic' definitions - safety, critical, important, significant, etc., etc. (see the APQP and FMEA files in the pdf files directory for many of the Ford, GM and Chrysler's definitions).

I would think the documentative and statistical (cpk's) would do it. Why not simply ask your customer to specifically state their expectations?
 
O

omolina

#3
Sorry, I did a wrong translation. In spanish we just have one word to mean Security, Safety, but I'm refering to safety characteristics.

Well, once I've clarified my question any other comments ?

Thanks, OMC
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#4
As long as they are identified on your control plan and FMEA I believe you're covered. Of course, your control plan has to have a control for the characteristic.
 
Thread starter Similar threads Forum Replies Date
E Can we still use MEDDEV 2.4/1 rev. 9 when classifying a medical device product under MDR? EU Medical Device Regulations 4
J MDR reporting and CAPA thoughts? Classifying Complaints on Risk 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 13
D Down Classifying a Medical Device from Class II to Class I Other US Medical Device Regulations 21
M Classifying Software - Insulin Calculator EU Medical Device Regulations 13
M Classifying a Multiple Risk Medical Device System 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
J Classifying Defect Reports from Business Partners US Food and Drug Administration (FDA) 4
S Directives for Classifying Standalone Software as Medical Devices CE Marking (Conformité Européene) / CB Scheme 3
J FDA classifying all PACS software devices as Moderate Level of Concern? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
B Classifying findings as Major vs. Minor findings in the AS9100 world AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
C Classifying documentation changes for priority Document Control Systems, Procedures, Forms and Templates 1
S Classifying SMD chip resistor and SMD array resistor - Electronic Components Various Other Specifications, Standards, and related Requirements 9
D Classifying Nonconformance so that they can be Actioned in Relation to Time Frames Nonconformance and Corrective Action 7
A Classifying Documents for Different Document Levels ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
A Suppliers - Classifying Critical and Major suppliers & how to define them? Supplier Quality Assurance and other Supplier Issues 2
J 1.11 Preliminary Identification of Special Product and Process Characteristics APQP and PPAP 4
silentmonkey How to decide what characteristics need to be verified during incoming inspection? ISO 13485:2016 - Medical Device Quality Management Systems 5
earl62 What is the best way to control special characteristics in Control plan? Is it Mandatory to have SPC for IATF 16949? IATF 16949 - Automotive Quality Systems Standard 7
B FCA US Customer Specific IATF 16949- Critical Characteristics 8.6.2 Customer and Company Specific Requirements 0
K PSA Special characteristics Customer and Company Specific Requirements 0
A Demonstration of Equivalence - Need for comparing biological characteristics for an SamD EU Medical Device Regulations 1
K EU MDR Annex 1 Chapter III: Information in the Instructions for Use-23.4 (e) the performance characteristics of the device; EU Medical Device Regulations 1
A AS9102B - 3.6 Design Characteristics and form 3 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
R What is meant by Use of COMPONENTS WITH HIGH-INTEGRITY CHARACTERISTICS in ME EQUIPMENT (clause no 4.9) IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
H SPC for special characteristics - CSR - Control of SC and CC Statistical Analysis Tools, Techniques and SPC 1
Prashant G AS9100 Requirement - Verification of characteristics results with drawing requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
F Assignment of Special Characteristics to government regulations IATF 16949 - Automotive Quality Systems Standard 5
C AS9100 8.3.5.e Design and Development Outputs - Key Characteristics / Critical Items AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
N PQC (Product Quality Characteristics) and PFMEA FMEA and Control Plans 3
P Sanctioned Interpretations - IATF 16949 Cl. 8.3.3.3 Special characteristics IATF 16949 - Automotive Quality Systems Standard 3
E IATF 16949 Cl. 8.2.3.1.2 - Customer-designated special characteristics IATF 16949 - Automotive Quality Systems Standard 1
J Are Capability Requirement(s) Valid for All Characteristics? Capability, Accuracy and Stability - Processes, Machines, etc. 6
D Customer-Designated Special Characteristics vs. Special Characteristics IATF 16949 - Automotive Quality Systems Standard 2
S IATF 16949 Clause 8.3.3.3 - Documentation of all Special Characteristics in Drawings IATF 16949 - Automotive Quality Systems Standard 2
S What should the FMEA Severity for SC & CC Characteristics be? FMEA and Control Plans 4
A Not all characteristics follow a Normal Distribution - How do you do SPC Chart Capability, Accuracy and Stability - Processes, Machines, etc. 5
Y Process Characteristics for Inspection and Storage FMEA and Control Plans 4
S FMEA's - Severity and Classification of Print Characteristics FMEA and Control Plans 1
C Special Characteristics - ISO/TS 16949 Clause 7.3.2.3 IATF 16949 - Automotive Quality Systems Standard 8
N VDA 1 Critical Characteristics Requirements Help needed VDA Standards - Germany's Automotive Standards 6
Q Choosing In-Process Inspection Characteristics Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
B Is SPC data For Special Characteristics always required? TS 16949 clause 8.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Douglas E. Purdy C=0 Sampling for Variable Characteristics Quality Manager and Management Related Issues 14
V Ford Dimensional Tag Characteristics requirements APQP and PPAP 2
R New draft guidelines for 510 (K) with Different Technological Characteristics. 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
U-DOG SC (Special Characteristics) in CP (Control Plan) not on all Prints IATF 16949 - Automotive Quality Systems Standard 1
Q TS 16949 Clause 7.2.1.1 Customer Designated Special Characteristics IATF 16949 - Automotive Quality Systems Standard 6
Ron Rompen Seeking Test Lab which can do 1440 Hour Accelerated Weathering Characteristics Misc. Quality Assurance and Business Systems Related Topics 1
Z Pass-Though Characteristics in PFMEA (Process FMEA) FMEA and Control Plans 2
G How to manage/control critical items and key characteristics? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
A MSA (Measurement System Analysis) for Characteristics with One Tolerance Limit Capability, Accuracy and Stability - Processes, Machines, etc. 10

Similar threads

Top Bottom