SBS - The best value in QMS software

CNC Machine Operational Qualification Recoverability Testing

C

chasf

#1
Has anyone had experience with OQ recoverability testing of a CNC Machine?
This has to do with power outages primarily and the capability to recover afterward.
To what extreme should the testing go?
Our consultant suggested we wipe out the system and then use the recovery plan as the test in the Operational Qualification.
 
Elsmar Forum Sponsor

bobdoering

Stop X-bar/R Madness!!
Trusted Information Resource
#2
I might question if there is an expectation that the machine will crash if the power comes back on, and if so what steps need to be taken to repair the machine (spare tooling, etc.) - or can you prevent that from happening for less damage and faster startup. I would have to think it is as important as reloading the program.
 
Thread starter Similar threads Forum Replies Date
Q Operational Qualification of a CNC machine ISO 13485:2016 - Medical Device Quality Management Systems 4
B SOP for CNC turret punching machine for sheet metal process Manufacturing and Related Processes 0
B IQ/OQ/PQ of CNC Milling Machine Qualification and Validation (including 21 CFR Part 11) 2
GreatNate Qualifying a CNC machine Manufacturing and Related Processes 3
F AS9100D Process Matrix for a small cnc machine shop AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
S Machine Setup for a CNC Machine Capability Study Capability, Accuracy and Stability - Processes, Machines, etc. 1
S Need Continuous improvement Suggestions - Small (30 of us) all-CNC machine shop ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
J CNC Machine Tool Calibration - 6 dof Calibration Interferometers General Measurement Device and Calibration Topics 1
P Machine Shop Tool Crib Procedure - Tooling for CNC mills Quality Tools, Improvement and Analysis 1
B SPC Software Selection for use in a CNC Machine Shop - InfinityQS and Lighthouse Quality Assurance and Compliance Software Tools and Solutions 3
K Probe on CNC machine - Inspecting on cnc machine tools vs. CMM Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
P CNC machine validation for Contract Manufacturer of medical devices Qualification and Validation (including 21 CFR Part 11) 1
B Is a work instruction mandatory - CNC machine ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 20
I CNC Machine Validation Requirement ISO 13485:2016 - Medical Device Quality Management Systems 20
E Controlling CNC Machine Programs - Your recommendations appreciated Manufacturing and Related Processes 12
J CNC Calibration - What should be calibrated on a HAAS machine? General Measurement Device and Calibration Topics 7
M Machine Tool Calibration - Machine Capability Studies on CNC Machine Tools Manufacturing and Related Processes 5
M Volumetric Positioning - Machine capability studies for CNC machine tools General Measurement Device and Calibration Topics 4
R Control of CNC Machine Programs in Engineering Workshops (Aerospace, AS9100) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 20
M Cost Estimating Spreadsheet for a CNC Machine & Weld Shop Manufacturing and Related Processes 8
P SPC in job shop? CNC machine producing a max of 50 pieces per job Statistical Analysis Tools, Techniques and SPC 4
D Machine Capability Studies on CNC Lathes Statistical Analysis Tools, Techniques and SPC 35
T Pin gage identification in a small CNC/Screw machine job shop General Measurement Device and Calibration Topics 9
J Do CNC Machine Programs need to be Controlled Documents? Document Control Systems, Procedures, Forms and Templates 9
A CNC Mill and Lathe - Validation Manufacturing and Related Processes 2
R Process Validation on CNC Lathe and Milling machining process Design and Development of Products and Processes 1
R CNC Software Validation requirements as per ISO 13485:2016 Other ISO and International Standards and European Regulations 8
A ISO 9001 Control of Production Equipment - CNC Machines ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
C O-Ring Groove Measurement Method in CNC Machined Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 9
D OQ, PQ Requirement for Aerospace? Recently purchased CNC AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
S FMEA for CNC Manufacturing FMEA and Control Plans 9
V Ultrasonic NDT on CNC Product made of Stainless Steel General Measurement Device and Calibration Topics 2
M AS9100 Control of CNC programs AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S Quality Assurance Plan template for CNC Milling Industry AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
H Control plan example format for CNC machining activities FMEA and Control Plans 3
H FMEA sample for complete CNC machining process FMEA and Control Plans 1
L Caliper Calibration Standards - One for CNC and one for Sheet Metal? General Measurement Device and Calibration Topics 9
C Equipment Qualification of a CNC Mill Center ISO 13485:2016 - Medical Device Quality Management Systems 5
P Internal Audit of CNC Programing Internal Auditing 3
S CNC Machining Process Validation for Prototypes ISO 13485:2016 - Medical Device Quality Management Systems 1
A Are CNC Program Backups Required by TS 16949? IATF 16949 - Automotive Quality Systems Standard 3
G Sampling Plan for Inspection of Metal Parts after CNC Machining Inspection, Prints (Drawings), Testing, Sampling and Related Topics 34
bobdoering Capability of new CNC machines Capability, Accuracy and Stability - Processes, Machines, etc. 32
V CNC Probe Qualification and DME Interface General Measurement Device and Calibration Topics 4
B CNC Machining Shop still heavily relies on First Piece and Final QC Inspection Manufacturing and Related Processes 5
A Engineering Production Skills Matrix for Assembly or CNC Machinists Management Review Meetings and related Processes 6
V CNC Process Validation Cpk Ppk & In-Process Inspection Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
R CNC OTS Software Validation Separate from full IQ/OQ/PQ for 21CFR Part 820 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 9
S Receiver Gages vs. CNC CMM Checks Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
M Commercially available software solution for the control of our CNC programs. Records and Data - Quality, Legal and Other Evidence 3

Similar threads

Top Bottom