Color Measurement (Monitoring) during Processes

QMMike

Involved In Discussions
#1
Hi all!!!

Been pretty quite for me as of late -- until some recent color concerns arose with one of our customers.

I'm hoping someone here could help me out a little bit, either with a unit they would like to sell or suggestions of one that they've used.

We currently use a Byk-Gardner Color-Guide/Gloss to monitor colors at setup. Our customers will give us a color chip to use as a standard, we will scan it and save it in our unit. We will then verify setup based off this standard using our unit.

I'm looking for a cost effective way of monitoring our processes throughout the runs. Ideally, I'd like to purchase another unit that I could give to our supervisors or inspector. Any suggestions?
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
D MSA (Measurement Systems Analysis) on Visual Color Check IATF 16949 - Automotive Quality Systems Standard 13
P Color Measurement - SP 60 Sphere Spectrophotometer - How do we input the L*a*b* Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
Marc Measurement Uncertainty in Subjective Tests such as Color or Taste Measurement Uncertainty (MU) 14
J SSQR-01 Vision Requirements- Color Blindness AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
Marc Visual Inspection - Color Vision Coffee Break and Water Cooler Discussions 15
D IMDS for Like Components (Interior Plastic, Leather/vinyl Armrest, etc.)other than Color APQP and PPAP 1
D Requirements for the dimensions / color of medical device labels - Software as a Medical Device IEC 62304 - Medical Device Software Life Cycle Processes 2
M Informational Work in progress at the FDA for biological evaluation – Color Hazard and RISk calculator (CHRIS) Medical Device and FDA Regulations and Standards News 0
S Device name change and label color change EU requirement? Other Medical Device Regulations World-Wide 6
erozas2003 Color test on molded plastic parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
S Testing (Evaluation of) and Verification of Employee Color Vision Human Factors and Ergonomics in Engineering 19
C ISO 7010 m002 mandatory action - Color requirements on Packaging IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
J Paint Color Standards Manufacturing and Related Processes 5
V Query on PA66+GF15% - Color variation (Natural to Yellowish) problem Manufacturing and Related Processes 20
L Color measurements R&R: what's wrong with white? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
K Color to be used for the Packing box Symbols Other Medical Device Related Standards 2
R Paint Color Control Manufacturing and Related Processes 6
S Organisms postive to Wellcolex? Color Salmonella Test Kit US Food and Drug Administration (FDA) 1
S Labeling Symbols for EU - E.g. EN980 - Dimension, color, font, etc. Other ISO and International Standards and European Regulations 6
optomist1 Error Mistake Proofing Color Parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
B ISO 3864-4 Symbol Color Regulations Other ISO and International Standards and European Regulations 4
M Molded Component Color Tolerance Specification Manufacturing and Related Processes 6
A Reporting of Design Changes (Color Change Only) EU Medical Device Regulations 5
K Black Anodize Color Specification per MIL Spec Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
R AC 7120 Vision and Color Blindness Testing AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
somashekar How do you specify color tolerance ... Manufacturing and Related Processes 6
K How do I autofill cell color based on other cells' color in Excel? Excel .xls Spreadsheet Templates and Tools 11
Steve Prevette Color Coded SPC Dashboards The Reading Room 0
W Approximation of a Gardner color value to the APHA Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
S Color Coded Shirt System on our Shop Floor Lean in Manufacturing and Service Industries 18
T Enclosure Flammability Rating of Molded-In Custom Color Liquid Concentrates IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
R 5S Red Tag and ISO Procedure Red Tag - Tag Color Conflict Document Control Systems, Procedures, Forms and Templates 7
1 What device to use to measure LCD display devices color/brightness General Measurement Device and Calibration Topics 3
B Calibration Interval of Munsell Color Charts General Measurement Device and Calibration Topics 3
J Master Color Plaque recommended sources Quality Tools, Improvement and Analysis 16
B Color Individual Points on a Control Chart? Using Minitab Software 7
G Organoleptic (Color, Odor, Taste, Texture, etc) lexicon? General Measurement Device and Calibration Topics 8
V Color Assessment Cabinet - Calibration IATF 16949 - Automotive Quality Systems Standard 1
P Color Cross Reference - PMS and NCS colors samples Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
D Need suggestions for a mobile Spectrophotometer (a.k.a. color meter) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
Proud Liberal Color Evaluation of Tinted Transparent Plastic Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
CalRich How to display color chips - Injection molding color verification Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
Ajit Basrur Color Codes for different gases Manufacturing and Related Processes 2
S Phenolic Resin - Colour Variation - Will oxidation change its color? Manufacturing and Related Processes 4
P Color Coding of Tools for 5S - The Visual Workplace Lean in Manufacturing and Service Industries 22
Wes Bucey Big Brother! - Even in your color laser printer After Work and Weekend Discussion Topics 15
M Color Codes and visual floor marking - Are there any Standards? Manufacturing and Related Processes 11
E How to specify Paint or Plastic Color - Pantone or Manufacturer Specification? Manufacturing and Related Processes 15
B TS16949 Clause 7.1 in plastic pellet 'color mixing' and color compounding' process IATF 16949 - Automotive Quality Systems Standard 1
J Color coding Standard? Color Coding Raw Metals in a Small Machine Shop Lean in Manufacturing and Service Industries 5

Similar threads

Top Bottom