SBS - The Best Value in QMS software

company is not a guide 25 registered

S

SniperMan

#1
We are a painting facility located in southwestern Ontario, my question is I have contracted a company which doesnt have a guide 25 certification. QS requires? for outside source calibration to be a guide 25 registered , I have out pressure and temperature gauges calibrated by this company, will that mean we did not satisy the QS requirement for calibration.

Opinions please
 
Elsmar Forum Sponsor

Jerry Eldred

Forum Moderator
Super Moderator
#2
:p

The options are (as I currently understand), use either the OEM, a Guide 25 (or ISO 17025) accredited third party lab, or they have been audited by a 2PCP auditor. I'm not an expert, but that's what we have had to do at my company.

It's kind of a race trying to keep up with the changes. If your site is QS9000 registered, then you'll need to follow the criteria. If you're not QS9000 registered, and you're a secondary contractor, you'll want to do some homework to determine to what extent you have to comply.
 
K

Ken K

#3
During one of our QS9000 audits, the auditor requested a list of all outside firms we use for calibration. We had to replace two of them because they were not ISO/17025 or A2LA accredited.
But, if either firm was in the process of getting accredited, they were required to submit to us in writing those plans and a target date they were to acheive accrediation.
That was over a year ago and if I am correct, all calibration firms must now be accredited.
 
Thread starter Similar threads Forum Replies Date
M Transferring ISO 17025 from one company to another ISO 17025 related Discussions 1
P Audit check for IT company (ISO 9001) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
lanley liao Does all of the suppliers need to integrated into the supplier list qualified of the company? Oil and Gas Industry Standards and Regulations 2
F IVD registration in EU - Northern Ireland based company EU Medical Device Regulations 0
W Where does a coatings and paint company fall in IATF? IATF 16949 - Automotive Quality Systems Standard 5
A AS9100D - Clause 8.1 Operation - Coating service company AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
O Informational Ford Motor Company Customer Specific Requirements for IATF 16949:2016 - 08 Jan 2021 Customer and Company Specific Requirements 0
L Have been purchased by a corporate company ISO 13485:2016 - Medical Device Quality Management Systems 7
R Advice needed: Shall I report my not complying company to NB / competent Authority (Europe) EU Medical Device Regulations 6
lanley liao What shoud i do if our company top management has been changed. Oil and Gas Industry Standards and Regulations 8
S Malcolm Baldrige Company Dashboard Quality Tools, Improvement and Analysis 3
T IATF Rules for sharing production space with another company IATF 16949 - Automotive Quality Systems Standard 10
J Leveraging another company's ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 5
R MDEL and company affiliate Canada Medical Device Regulations 0
E Our company is planning to file MDD not MDR next month. Do we require to show chemical characterization report ? CE Marking (Conformité Européene) / CB Scheme 2
S Is QMS like a set of rules and regulations that a company follows? ISO 13485:2016 - Medical Device Quality Management Systems 10
E Contract manufacturer FDA requirements foreign company US Food and Drug Administration (FDA) 6
J How much to charge for helping a startup company with initial ISO 13485 certification? Consultants and Consulting 3
J Sister-company providing parts is only ISO 9001 registered IATF 16949 - Automotive Quality Systems Standard 7
D IATF 16949 Requirement for CMMI in a Global Company Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 0
T Help to Suggest name for a new certification and inspection company Coffee Break and Water Cooler Discussions 7
M Address change for a company with CE/ISO13485 EU Medical Device Regulations 2
M IT validation for a paper based MD repair company QMS ISO 13485:2016 - Medical Device Quality Management Systems 6
M QMS for a repair/servicing company ISO 13485:2016 - Medical Device Quality Management Systems 2
C Internal Audits in a tiny Dx Company Internal Auditing 33
T ISO 13485 - 5.5.1 Responsibility and authority - Small Company Independence ISO 13485:2016 - Medical Device Quality Management Systems 13
F Quality manual for trading company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
L Implementing the PRRC role in a company EU Medical Device Regulations 8
BeaBea ISO 9001 Customer Feedback Methods - What has worked for your company? Service Industry Specific Topics 17
M Customers Request AS9100 certification - Small Company (less than 20 employees) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
U Document Approval - Software company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
T EQMS for small medical device company ISO 13485:2016 - Medical Device Quality Management Systems 18
qualprod Corona virus Contingency plan - What have you done in your company? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 25
Q Must product name be listed the same name in FURLS, UDI, GUDID and Company Website? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
E Sharepoint for ISO 13485 QMS for small IVD company ISO 13485:2016 - Medical Device Quality Management Systems 11
N Small Company - Internal audit process - Who does the audit? Internal Auditing 16
Z 510(k) usage - Company has 2 physically similar products Medical Device and FDA Regulations and Standards News 2
Q Company Ownership Change ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
L Contracted Manufacture Company wanting to be able to design and manufacture own product. 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 7
D ISO9001 for one man company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
T Client Communication - SaaMD company Misc. Quality Assurance and Business Systems Related Topics 3
R Notified Body for MDD 1Q20 - Florida Company Registrars and Notified Bodies 4
E In need of a new TGA sponsor - Small software company Other Medical Device Regulations World-Wide 4
F ISO 17025 8.8 Internal Audits in a segmented company ISO 17025 related Discussions 5
E Company A supplies pharmaceuticals to the MOI - Who is responsible? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
J Quality Assurance in China - Developing a quality management system for a California company Misc. Quality Assurance and Business Systems Related Topics 9
S How to determine & document Organizational Knowledge of a company Document Control Systems, Procedures, Forms and Templates 4
U IT Process is Taken From company and Added to Corporate Structure ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
G Is ISO 9001:2015 certification worth it for a company that does only contract manufacturing? Quality Management System (QMS) Manuals 14
N Non traumatic edge - Remark in some of my company drawings EU Medical Device Regulations 1

Similar threads

Top Bottom