Comparing ISO 10012 and 17025

D

dagreda

#1
iso 10012

asking fr HELP !! friends, I´m comparing the ISO 10012 and the 17025
for that purpose i will be glad if someone can help me JUST with the INDEX of the 10012 as an attached file in order check it.
TIA
dagreda
 
Elsmar Forum Sponsor
D

D.Scott

#2
dagreda said:
asking fr HELP !! friends, I´m comparing the ISO 10012 and the 17025
for that purpose i will be glad if someone can help me JUST with the INDEX of the 10012 as an attached file in order check it.
TIA
dagreda
Welcome to the Cove.

I don't have it in electronic format so I can't attach anything but here is an abreviated table of contents:
1) Scope
2) Normative references
3) Definitions
4) Requirements
4.1 General
4.2 Measuring equipment
4.3 Confirmation system
4.4 Periodic audit and review
4.5 Planning
4.6 Uncertainty of measurement
4.7 Documented confirmation procedures
4.8 Records
4.9 Nonconforming measuring equipment
4.10 Confirmation labeling
4.11 Intervals of confirmation
4.12 Sealing for integrity
4.13 Use of outside product and services
4.14 Storage and Handling
4.15 Traceability
4.16 Cumulative effect of uncertainties
4.17 Environmental
4.18 Personnel

Hope that helps
 
Thread starter Similar threads Forum Replies Date
S Looking for a checklist comparing ISO 13485:2016 and 21 CFR Part 820 ISO 13485:2016 - Medical Device Quality Management Systems 14
M Comparing the MMOG (v3 or v4) with ISO / TS16949 Customer and Company Specific Requirements 3
D Comparing the ISO 9001:2008 standard to ISO 17025 ISO 17025 related Discussions 2
J Has anyone created a matrix comparing ISO 9001 VS BS 7799 and or ISO 27001? Document Control Systems, Procedures, Forms and Templates 1
S Comparing ISO with PMBOK (Project Management Body of Knowledge) Misc. Quality Assurance and Business Systems Related Topics 2
A Demonstration of Equivalence - Need for comparing biological characteristics for an SamD EU Medical Device Regulations 1
G Comparing Gauge Blocks - Translating the calibration between the master set and the QA set General Measurement Device and Calibration Topics 2
V Statistical basis and justification while comparing / changing sampling plans Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
N Does FDA allow comparing with the competitors Medical Device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
L Procedure for Comparing the Monitor Reading with Laboratory Result Statistical Analysis Tools, Techniques and SPC 4
A Comparing US/FDA Drug Regulations against US/FDA Device Regulations US Food and Drug Administration (FDA) 3
E Correct Statistical Test comparing 2 Groups Statistical Analysis Tools, Techniques and SPC 14
R Comparing Laboratory Scope of Accreditation against internal equipment General Measurement Device and Calibration Topics 3
C Comparing Two Independent Group Observations - 95% Confidence Intervals Overlap Statistical Analysis Tools, Techniques and SPC 3
S Comparing Quality System Software Features Quality Assurance and Compliance Software Tools and Solutions 18
C Comparing Two Test Methods - Acceptable Difference(s)? Statistical Analysis Tools, Techniques and SPC 3
M pH Calibration - Comparing Electrical and CRM Methods General Measurement Device and Calibration Topics 1
I Six Sigma comparing to other National and International Models Six Sigma 6
A Comparing Effect of Process Parameters on Equipment Performance during Start Ups Statistical Analysis Tools, Techniques and SPC 3
P Acceptable Adjusted R Squared Value Comparing 2 Measurement Devices in Minitab Using Minitab Software 3
C Comparing PPM Year over Year - Determining the PPM decrease from 2009 to 2010 Benchmarking 10
M z Test vs. F Test - The most appropriate for comparing the Variances Statistical Analysis Tools, Techniques and SPC 3
T Comparing Two Measurement Systems in terms of Accuracy and Capability Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
R Comparing the Accuracy of Analog vs. Digital Multimeter General Measurement Device and Calibration Topics 6
T Comparing two different Ultrasonic Tester Calibration Techniques General Measurement Device and Calibration Topics 2
Q Internal Audit:Comparing Efficiency of Similar Processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
D Comparing Variation - A CMM and an On-Line Inspection Station Statistical Analysis Tools, Techniques and SPC 6
N Statistically Comparing Technician Techniques Reliability Analysis - Predictions, Testing and Standards 16
C Comparing Histograms - Bimodal Distribution? Statistical Analysis Tools, Techniques and SPC 4
K Comparing CQE vs. MSc. Professional Certifications and Degrees 1
J To PPAP or Not? Comparing two machines (one old and one new) APQP and PPAP 6
C Comparing OHSAS 18001 to the new ANSI Z10 - Where I can get information? Occupational Health & Safety Management Standards 1
A Comparing six sigma & EFQM (European Foundation for Quality Management) Six Sigma 2
C Comparing what I do against Canada request - Immigration Immigration and Expatriate Topics 4
J KAPPA Statistic - Comparing appraisers ratings to a known standard IATF 16949 - Automotive Quality Systems Standard 8
R Comparing MicroVu?s Vertex machine to OPG?s Smart Scope Flash General Measurement Device and Calibration Topics 2
D Comparing Apples and Apples vs. Apples and Oranges QS-9000 - American Automotive Manufacturers Standard 8
C Gap Analysis comparing QS-9000 and TS 16949 IATF 16949 - Automotive Quality Systems Standard 33
A ISO 11607-1: 2019 main changes Other Medical Device Related Standards 2
G National Structural Steel Specification 7th Edition - Do I now have to be audited against ISO 3843-3 as well as ISO 9001? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 0
J How much to charge for helping a startup company with initial ISO 13485 certification? Consultants and Consulting 3
J ISO 13485 System 'soft start' - How to best reflect this in initial audits, management review minutes and other records? ISO 13485:2016 - Medical Device Quality Management Systems 3
L How to understand the clause 6 Planning of ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
D ISO 13485 - 7.3.6 Design and development verification - Do most folks create a separate SOP? ISO 13485:2016 - Medical Device Quality Management Systems 4
B ISO 8536-4 Contamination Index ISO 13485:2016 - Medical Device Quality Management Systems 0
S Practical Implementation of ISO 14971 ISO 14971 - Medical Device Risk Management 6
C ISO 13485 :2016 - CAPA - Does every CAPA need to be checked by regulations? ISO 13485:2016 - Medical Device Quality Management Systems 9
L Process changes and biocompatibility (ISO 10993-1) Other Medical Device Related Standards 1
J Recommendations for online ISO 19011 training? Training - Internal, External, Online and Distance Learning 6
D ISO 13485 8.2.1 and 8.2.2 - Customer Feedback and Customer Complaints ISO 13485:2016 - Medical Device Quality Management Systems 5

Similar threads

Top Bottom