Comparing the MMOG (v3 or v4) with ISO / TS16949

M

Melanie 27

#1
Hello guys,:bigwave:

I urgently need your help :):frust:

My name is Melanie and I am student in quality management system.

Could some one of you have the matching between MMOG requirments and ISO / TS16949 requirments ( which question in MMOG matches with which one in TS 16949?)

Thank you So much in advance.
 
Last edited by a moderator:
Elsmar Forum Sponsor
L

lk2012

#2
hi Melanie,
I've done an MMOG self-assessment recently and I can tell you that there is no clear cut way of linking a specific TS/ISO clause with a section in the MMOG.

The easiest thing for you is to look at the different sections of the MMOG and find the nearest match in the TS/ISO standard.
example:
MMOG section 'Strategy and Improvement' is most likely like 'Management Responsibility' with a bit of 'Generic requirements' in ISO/TS

Being a student, this will be a good exercise for you in understanding the ISO/TS standard and its application.
hope this helps
Lil
 
#3
no real straighforward connection. They are completely different. TS is a Business Management System covering all aspects of a business. MMOG stands for Global Materials Management Operations Guideline/Logistics Evaluation and as such places much more emphasis on material management and logisitcs. not that TS does not includes these but the MMOG much more strcitly defines how you should be doing certain activities.
 

LUV-d-4UM

Quite Involved in Discussions
#4
Hello guys,:bigwave:

I urgently need your help :):frust:

My name is Melanie and I am student in quality management system.

Could some one of you have the matching between MMOG requirments and ISO / TS16949 requirments ( which question in MMOG matches with which one in TS 16949?)

Thank you So much in advance.
The difference is that MMOG v4 have some elements on Continuous Improvement or Lean Manufacturing.
 
Thread starter Similar threads Forum Replies Date
A Demonstration of Equivalence - Need for comparing biological characteristics for an SamD EU Medical Device Regulations 1
G Comparing Gauge Blocks - Translating the calibration between the master set and the QA set General Measurement Device and Calibration Topics 2
V Statistical basis and justification while comparing / changing sampling plans Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
N Does FDA allow comparing with the competitors Medical Device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
L Procedure for Comparing the Monitor Reading with Laboratory Result Statistical Analysis Tools, Techniques and SPC 4
S Looking for a checklist comparing ISO 13485:2016 and 21 CFR Part 820 ISO 13485:2016 - Medical Device Quality Management Systems 14
A Comparing US/FDA Drug Regulations against US/FDA Device Regulations US Food and Drug Administration (FDA) 3
E Correct Statistical Test comparing 2 Groups Statistical Analysis Tools, Techniques and SPC 14
R Comparing Laboratory Scope of Accreditation against internal equipment General Measurement Device and Calibration Topics 3
C Comparing Two Independent Group Observations - 95% Confidence Intervals Overlap Statistical Analysis Tools, Techniques and SPC 3
D Comparing the ISO 9001:2008 standard to ISO 17025 ISO 17025 related Discussions 2
S Comparing Quality System Software Features Quality Assurance and Compliance Software Tools and Solutions 18
C Comparing Two Test Methods - Acceptable Difference(s)? Statistical Analysis Tools, Techniques and SPC 3
M pH Calibration - Comparing Electrical and CRM Methods General Measurement Device and Calibration Topics 1
I Six Sigma comparing to other National and International Models Six Sigma 6
A Comparing Effect of Process Parameters on Equipment Performance during Start Ups Statistical Analysis Tools, Techniques and SPC 3
P Acceptable Adjusted R Squared Value Comparing 2 Measurement Devices in Minitab Using Minitab Software 3
C Comparing PPM Year over Year - Determining the PPM decrease from 2009 to 2010 Benchmarking 10
M z Test vs. F Test - The most appropriate for comparing the Variances Statistical Analysis Tools, Techniques and SPC 3
T Comparing Two Measurement Systems in terms of Accuracy and Capability Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
R Comparing the Accuracy of Analog vs. Digital Multimeter General Measurement Device and Calibration Topics 6
T Comparing two different Ultrasonic Tester Calibration Techniques General Measurement Device and Calibration Topics 2
Q Internal Audit:Comparing Efficiency of Similar Processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
D Comparing Variation - A CMM and an On-Line Inspection Station Statistical Analysis Tools, Techniques and SPC 6
N Statistically Comparing Technician Techniques Reliability Analysis - Predictions, Testing and Standards 16
C Comparing Histograms - Bimodal Distribution? Statistical Analysis Tools, Techniques and SPC 4
K Comparing CQE vs. MSc. Professional Certifications and Degrees 1
J To PPAP or Not? Comparing two machines (one old and one new) APQP and PPAP 6
C Comparing OHSAS 18001 to the new ANSI Z10 - Where I can get information? Occupational Health & Safety Management Standards 1
J Has anyone created a matrix comparing ISO 9001 VS BS 7799 and or ISO 27001? Document Control Systems, Procedures, Forms and Templates 1
A Comparing six sigma & EFQM (European Foundation for Quality Management) Six Sigma 2
C Comparing what I do against Canada request - Immigration Immigration and Expatriate Topics 4
J KAPPA Statistic - Comparing appraisers ratings to a known standard IATF 16949 - Automotive Quality Systems Standard 8
R Comparing MicroVu?s Vertex machine to OPG?s Smart Scope Flash General Measurement Device and Calibration Topics 2
D Comparing ISO 10012 and 17025 ISO 17025 related Discussions 2
S Comparing ISO with PMBOK (Project Management Body of Knowledge) Misc. Quality Assurance and Business Systems Related Topics 2
D Comparing Apples and Apples vs. Apples and Oranges QS-9000 - American Automotive Manufacturers Standard 8
C Gap Analysis comparing QS-9000 and TS 16949 IATF 16949 - Automotive Quality Systems Standard 33
Sean Kelley How to upload GM's MMOG survey version 4 to GM Powersupply Customer and Company Specific Requirements 3
Stijloor Global MMOG/LE Implementation Training: Level 1 Customer and Company Specific Requirements 0
Howard Atkins GM Requirement for MMOG/LE Customer and Company Specific Requirements 3
Stijloor OEM (Original Equipment Manufacturer) Requirements for Global MMOG/LE Completion Customer and Company Specific Requirements 15
C MMOG Self-Assessment Questionaire from FORD Customer and Company Specific Requirements 2
Stijloor AIAG's MMOG/LE Version 3 Rollout - October 2009 Customer and Company Specific Requirements 11
J Materials Management Operations Guideline (MMOG) form... Customer and Company Specific Requirements 11
Marc Definition MMOG LE aka Global MMOG LE Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 0
K Has anyone heard of Global MMOG LE? Customer and Company Specific Requirements 9
Sean Kelley AIAG / Odette labels required in MMOG survey? AIAG / Odette electronic communication Customer and Company Specific Requirements 2
L Visteon CSR (Customer Specific Requirements) AIAG MMOG Customer and Company Specific Requirements 4
G MMOG (Materials Management Operations Guideline) - Ford logistics self assessment Customer and Company Specific Requirements 10
Similar threads


















































Top Bottom