Comparison of 21 CFR 820 and ISO 13485

R

Ray Carrell

#1
We are a US mfg. of medical calibration gases and I am in the process of preparing our technical file to comply with the MDD. We are also in the middle of completing our ISO 13485 certification. Is there a side by side comparison between the requirements of 21 CFR 820 to ISO 13485? I have seen such a comparison to ISO 9001.
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#3
Re: Iso 13485

We are a US mfg. of medical calibration gases and I am in the process of preparing our technical file to comply with the MDD. We are also in the middle of completing our ISO 13485 certification. Is there a side by side comparison between the requirements of 21 CFR 820 to ISO 13485? I have seen such a comparison to ISO 9001.
Hello Ray, Welcome to The Cove Forums! :bigwave: :bigwave:

I did an advanced search on: "21 CFR 820 to ISO 13485."

There may be some links to posts that are useful to you.

Stijloor.
 

Coury Ferguson

Moderator here to help
Staff member
Super Moderator
#4
Re: Looking for a comparison of 21 CFR 820 and ISO 13485

I have changed the title of this thread to better clarify your request.
 
R

Ray Carrell

#5
Re: Iso 13485

There is one that I've seen posted here at the forums in the past that was prepared to when the current version of ISO 13485 was still in draft. I'm attaching a version of that comparison which I've recently extensively modified and updated. I hope it helps!
Thanks for your help, this project seems a bit daunting.
 
R

Ray Carrell

#6
Re: Looking for a comparison of 21 CFR 820 and ISO 13485

Thanks for your help. I am new at this web site and I hope to be able to find help in getting this technical file completed. We are CE registered but have issues that need to be clarified.:agree1:
 

Ajit Basrur

Staff member
Admin
#7
Re: Looking for a comparison of 21 CFR 820 and ISO 13485

We are a US mfg. of medical calibration gases and I am in the process of preparing our technical file to comply with the MDD. We are also in the middle of completing our ISO 13485 certification. Is there a side by side comparison between the requirements of 21 CFR 820 to ISO 13485? I have seen such a comparison to ISO 9001.
There are lot of similarities and if you comply with ISO 13485, you would be very close to 21 CFR Part 820. :)
 
F

fishstix

#9
Re: Iso 13485

There is one that I've seen posted here at the forums in the past that was prepared to when the current version of ISO 13485 was still in draft. I'm attaching a version of that comparison which I've recently extensively modified and updated. I hope it helps!
This is going to be incredibly helpful to me. Thank you so much for taking the time to do this (and post it!)
 
G

grahamleigh

#10
Hi


Would it be possible to send me/post the file in its native format please - word or excel. I am doing a gap analysis against all our internal procedures and it would help tremendously


Regards

Graham
 
Thread starter Similar threads Forum Replies Date
R 21 CFR 820 comparison to RDC No.59 Other Medical Device Regulations World-Wide 2
S Comparison between 21 CFR Part 820 and Eudralex Vol 4 US Food and Drug Administration (FDA) 3
B GMP CFR 820 - ISO 13485 comparison ISO 13485:2016 - Medical Device Quality Management Systems 10
A Comparison of QMS regulations in US - Japan {21-CFR-820 vs PAL MO #169} Various Other Specifications, Standards, and related Requirements 3
Z Comparison between AS9100 and FAA 145 Repair-Station (CFR's, FAR's) Federal Aviation Administration (FAA) Standards and Requirements 3
K Comparison: AS9110C vs. C.A.S.E. 1-A AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K Comparison wanted: ISO 15378:2018 vs. PS9000:2016 Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
Q Capability - CPk comparison values Capability, Accuracy and Stability - Processes, Machines, etc. 12
O ISO 13485 vs. GMP - Comparison matrix wanted EU Medical Device Regulations 4
T Interlaboratory comparison or proficiency testing in destructive testing of welded joints ISO 17025 related Discussions 3
F Measurement Audit and ILC for ISO 17025 Clause 7.7.2 - Comparison with results of other laboratories ISO 17025 related Discussions 0
K Comparison essential requirements EU compared to those of MDSAP countries Other Medical Device Regulations World-Wide 3
L Comparison matrix between IATF 16949:2016 to ISO 12207, ISO 9001 and Automotive SPICE IATF 16949 - Automotive Quality Systems Standard 3
P ISO 15378 2015 to 2017 Comparison wanted General Auditing Discussions 4
E 2 participants in inter-laboratory comparison tests ISO 17025 related Discussions 3
T MDD and IVD comparison Other Medical Device Regulations World-Wide 2
Q JIS T 1115 Comparison (Japan Medical Device Standard) Japan Medical Device Regulations 0
A Does anyone have a comparison between ISO 9001:2015 and ISO 13485:2016? ISO 13485:2016 - Medical Device Quality Management Systems 2
J Machinery Directive vs. MDD Comparison Matrix wanted EU Medical Device Regulations 6
T Automated and Manual Measurement System Comparison (Correlation) Quality Tools, Improvement and Analysis 3
A ISO 13485:2003 vs. ISO 13485:2016 Differences Comparison ISO 13485:2016 - Medical Device Quality Management Systems 4
A ISO9001:2015 comparison with AS9100:2016 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
D Comparison of ISO 9001:2008 and CAN3-Z299.3 Other ISO and International Standards and European Regulations 1
C Checklist comparison between ISO9001:2008 and ISO 3834 Quality Management System (QMS) Manuals 1
N Digital vs Dial Caliper Comparison Measurement Uncertainty (MU) 17
P Comparison of OEDC and US FDA GLP (Good Laboratory Practices) Other Medical Device and Orthopedic Related Topics 4
P Alternative To PT/ILC (Inter-Laboratory Comparison) Requirement General Measurement Device and Calibration Topics 3
N Ranking Criteria Systematically - Pairwise Comparison.xlsm Lean in Manufacturing and Service Industries 8
C What is "Participation in interlaboratory comparison or proficiency-testing programs" General Measurement Device and Calibration Topics 8
G Comparison Study of CMMs and software along with Probe Types Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
F Comparison of 2 CMM machines using Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
M SAE AS 9101 Rev D and E Comparison wanted - March 2014 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
S ISO 9001:2008 / ISO TS16949:2009 Comparison ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
Q ISO 9001:2008 & 2015 comparison ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
C How to determine a sample size for comparison purposes ? Quality Tools, Improvement and Analysis 2
S Comparison between Rapapport Vassilliadis Broth and Selenite Broth for Salmonella Food Safety - ISO 22000, HACCP (21 CFR 120) 1
M CMDR vs. MDD Comparison Canada Medical Device Regulations 3
L Australia/Canada and USA v's EU Medical Devices Regulations Comparison Other Medical Device Regulations World-Wide 4
S Method Comparison Design Onput Sample Range Requirement Design and Development of Products and Processes 3
S Comparison between Microgen A+B,API 24e and microbact 24e US Food and Drug Administration (FDA) 1
F Statistical Comparison of Product: High Average vs. Low Range Capability, Accuracy and Stability - Processes, Machines, etc. 13
M Comparison between TS 16949 clauses 8.5.2 and 8.5.2.1 IATF 16949 - Automotive Quality Systems Standard 6
J Comparison table between ISO 20000 and ISO 9001 IT (Information Technology) Service Management 7
P GMP or quality system "requirement" comparison for different sector Various Other Specifications, Standards, and related Requirements 1
P IEC 60601-2-25:2011 Comparison Table (ECG, Diagnostic) IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
P The Name for a Calibration - Bootstrapping or Comparison General Measurement Device and Calibration Topics 12
H Quick Comparison Check of Multiple Thermocouples on one Datalogger General Measurement Device and Calibration Topics 6
M Adding Bizminer's Industry Financial data to my Peer Company Comparison Manufacturing and Related Processes 0
AnaMariaVR2 Regulatory Review of Novel Therapeutics ? Comparison of 3 Regulatory Agencies US Food and Drug Administration (FDA) 0
T IEC 60601-2-27 - Comparison of 2nd to 3rd edition IEC 60601 - Medical Electrical Equipment Safety Standards Series 6

Similar threads

Top Bottom