Compliance to EN 10204 Type 3.2 Certification

jerry_Malaysia

Quite Involved in Discussions
#1
Dear all

Lately one of my customer has asked my organization whether we can "comply to EN 10204 Type 3.2 Certification?"

AS per my understanding, EN10204 clause 4.2 says
"Inspection Certificate type 3.2
Documents prepared by both the manufacturer’s authorized inspection representative, independent of the manufacturing department and either the purchaser’s authorized inspection representative or the inspector designated by the official regulations and in which they declare that the products supplied are in compliance with the requirements of the order and in which test results are supplied."

Does this mean that I would have to prepare certificate together with a third party laboratory / Testing provider that is designated by the customer? But our customer asked me the question without addressing which laboratory that they accepted. :confused: Can I also produce the certificate based on the COC provided by the raw material supplier (the mill)?

Any advice?
 
Elsmar Forum Sponsor
M

machrk

#2
have you searched the Cove for this question or similar questions : try this link : ***SEARCH LINK REMOVED***

this may give you some help

my org is also considering this issue

:)

@KerrieAnne aka machrk
 
Last edited by a moderator:

jerry_Malaysia

Quite Involved in Discussions
#3
Hi Machrk

I have searched the cove for similar topic, but i found that mostly are in type 3.1 compliance. I have not find any information about type 3.2. Please guide me to locate the relevant information if there is any.
Also, if your organization is considering this issue, would you share how you start access whether you can "comply to EN 10204 Type 3.2 Certification?"
Thanks
Note: The link you provided is broken, i cannot get to the information. Please help repair the link
 
B

bluepagen

#4
Try to do a search again for the information you found concerning 3.1 certification requirements in EN10204. In one of the forum topics, there is a discussion on the requirements for 3.1 requirements of inspection documents. Within that discussion, which currently has 4 pages of responses, on page 2, there are several links with information that will tell you in chart format the En10204 terms and definitions for inspections and inspection documents needed, and from who, based on 3.1 or 3.2. The links in that discussion will provide you with the information. Go to that conversation, look at the files that have been shared, and review the charts within those files.The chart will spell it out.

We currently supply 3.1 or 3.2 material, and depending on our customer's request, the inspection documents are always going to needed. The difference is the extent of certification 3.2 material requires. It will involve a third party to certify the material referred to in the certification is the same material that went thru all the processes, is traceable, and is the material that your finished part is made from. The party certifying this will be able to say and document that because they have witnessed the required testing on the material or have followed the paperwork on the material and all of the analysis and testing involved from start to finish.

Your purchaser may procure that from a party that your company selects, or the customer may tell you who they want to certify that.

There are certifying bodies that will perform this certification for you, from forging thru processes, to final finished product.
 
Thread starter Similar threads Forum Replies Date
E Test report to certify compliance with IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 1
E Accredited vs. non-accredited labs for 60601 compliance in the US IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
E Accredited vs. non-accredited labs for 60601 compliance in the US Other Medical Device Related Standards 0
M Class II type machine , and its compliance with 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 14
C ISO 14001:2015 6.1.3 Compliance Obligations - Legal requirements monitoring ISO 14001:2015 Specific Discussions 0
H Automotive wires - Compliance with USCAR21-4 & USCAR38-1 Various Other Specifications, Standards, and related Requirements 0
M FULFILMENT of compliance obligation versus COMPLY with compliance obligations ISO 14001:2015 Specific Discussions 2
K ISO 13485 and compliance of electronic signature ISO 13485:2016 - Medical Device Quality Management Systems 5
L Medical device HIPAA compliance in encryption Medical Information Technology, Medical Software and Health Informatics 1
J Strategy for MDR Regulatory Compliance Procedure ISO 13485:2016 - Medical Device Quality Management Systems 4
G Adopting old product - compliance with IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 9
M Advice needed for SEH Compliance Software and ISNETWord Compatabiliy Occupational Health & Safety Management Standards 2
D HIPAA, HITECH and Interoperability compliance route Medical Device and FDA Regulations and Standards News 2
A Environmental Compliance obligations and risks (ISO 14001:2015 6.1.3) ISO 14001:2015 Specific Discussions 3
M Tracking Expiration dates on compliance certifications REACH and RoHS Conversations 2
T Training recommendations? Bringing our RoHS and REACH compliance efforts in-house REACH and RoHS Conversations 2
optomist1 Informational Training IMDS - Management of Product Chemical Regulatory Compliance RoHS, REACH, ELV, IMDS and Restricted Substances 2
G ISO 14001 - 6.1.3 Compliance Obligations ISO 14001:2015 Specific Discussions 1
Ed Panek Compliance with Standards? When a standard is updated/revised CE Marking (Conformité Européene) / CB Scheme 3
K IEC 62304 compliance - Code reviews as part of verification strategy IEC 62304 - Medical Device Software Life Cycle Processes 5
N Which EN ISO 17664 version compliance to EU MDR? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 3
N Audit non-compliance API Q1 - Use of External Documents 4.4.4 in Product Realization Oil and Gas Industry Standards and Regulations 8
C Compliance with ISO 17025 requirement 8.4.2 - Controls - Records recovery ISO 17025 related Discussions 4
J Management Representative and PRRC (Person Responsible for Regulatory Compliance) ISO 13485:2016 - Medical Device Quality Management Systems 10
N Audit non-compliance - API Spec Q1 9th Ed 5.6.1.2 b Oil and Gas Industry Standards and Regulations 10
J Interesting Discussion Compliance with regulations in exceptional circumstances EU Medical Device Regulations 5
L Wearables 21 CFR Part 11 compliance Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
V Preparing the IFU in compliance with MDR 745, Chapter III EU Medical Device Regulations 2
L AS9146 Implementation and Compliance AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
P MDR PRRC (person responsible for regulatory compliance) and personal liability EU Medical Device Regulations 3
R Foam mattresses used in hospitals - compliance with MDR requirements? EU Medical Device Regulations 6
E Machines in Europe not in compliance with the EC directive CE Marking (Conformité Européene) / CB Scheme 0
N EUDAMED postponement and compliance with Article 120 (3) MDR for Legacy Devices EU Medical Device Regulations 8
R Role of quality compliance in SAP Software Quality Assurance 2
E Part 11 Compliance, Excel living documents (i.e. document master list, equipment list, approved supplier list) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 3
M MDR Legacy Medical Device Labeling compliance timeline EU Medical Device Regulations 3
D Required Checklist Showing Compliance to IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 11
D What is the best software used for the pharma compliance management? Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
T Rumours that class 1 NS, NM, NR devices will have a new deadline for MDR compliance EU Medical Device Regulations 3
M Informational From RAPS: Danish Regulators Seek to Help Smaller Companies With EU MDR Compliance Medical Device and FDA Regulations and Standards News 0
G ISO 9001 Legal Compliance and Legal Register Requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Ed Panek Do Cloud services require 21 CFR Part 11 compliance? Qualification and Validation (including 21 CFR Part 11) 7
R Certificate of compliance to RoHS/REACH/WEEE - any such animal? REACH and RoHS Conversations 18
Sidney Vianna Interesting Discussion Legal compliance as part of ISO 45001 accredited certification. Major OSHA penalties in the USA. Occupational Health & Safety Management Standards 15
D Control chart applicable? Percentage of compliance with a standard Statistical Analysis Tools, Techniques and SPC 2
J Business Intelligence and 21 CFR Part 11 Compliance Qualification and Validation (including 21 CFR Part 11) 1
M Informational US FDA issued the first warning letter for UDI violations to help ensure compliance Medical Device and FDA Regulations and Standards News 0
D USFDA vs NRTL/IEC 17025 Differences - Compliance testing lab ISO 17025 related Discussions 0
D USFDA vs NRTL/IEC 17025 Differences - Compliance testing lab US Food and Drug Administration (FDA) 6
I CAP/CLIA Environment - Part 11 Compliance Qualification and Validation (including 21 CFR Part 11) 3

Similar threads

Top Bottom