Compressed air system qualification and 1 micron particle analysis

ifserav

Involved In Discussions
#1
Hi to everibody
I am performing the qualification of a compressed air system, do you know if for the medical device inustry, must we make the analysis of 1 micron particle size?, i[m using 0.5 and 5 microns in my protocol, and using the ISO 8573 acceptance criteria, but i do not know if the 1 micron is also a requirement for us.

Why does it criteria was stated in ISO 8573?

Thanks in advance.

Best regards
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
P Validation of newly installed Clean Compressed Air System - Pharmaceutical company Qualification and Validation (including 21 CFR Part 11) 7
R Method for Dew Point and Oil content - Qualifying our Compressed Air System (CAS) Qualification and Validation (including 21 CFR Part 11) 7
I Process compressed air and contact with the product (ISO 8573-1:2010) Qualification and Validation (including 21 CFR Part 11) 0
V Validation Test and Acceptance Criteria for Compressed Air Qualification and Validation (including 21 CFR Part 11) 3
C Compressed Air coming into contact with Class II Medical Device Design and Development of Products and Processes 10
I What class of Compressed Air (ISO 8573) for Medical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
P How to reduce or shut off Compressed Air for Painting Robots Manufacturing and Related Processes 3
B Compressed Air Validation Help! Qualification and Validation (including 21 CFR Part 11) 2
jasonb067 Testing to ISO 8573 (Compressed Air Package) Classification 4, Paragraph 6.1 Other ISO and International Standards and European Regulations 8
R Compressed Air Qualification Qualification and Validation (including 21 CFR Part 11) 2
T Gage R&R Study- Measuring a flexible part (compressed part) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
B Precision Machining and Compressed Control Limits Capability, Accuracy and Stability - Processes, Machines, etc. 13
O 1kg Dry Ice(Compressed CO2) = what CO2E/MetricTon Miscellaneous Environmental Standards and EMS Related Discussions 2
W Air Quality Measurement Hardware and Software General Measurement Device and Calibration Topics 11
M Informational US FDA – Ear, Nose, and Throat Devices; Classification of the Self-Fitting Air-Conduction Hearing Aid Medical Device and FDA Regulations and Standards News 0
E Employee complaining about air quality Occupational Health & Safety Management Standards 12
P HVAC System vs Air Handling Unit (AHU) - Differences Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
P Fan filter unit (un-ducted to air supply) vs fan filter unit (ducted to air supply) Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
O Air Flow - Which is the operational difference between LAF (vertical and horizontal) and RLAF? Manufacturing and Related Processes 2
A Tubing Clog Tester - Convert from Air Bubble to Flow Rate Reliability Analysis - Predictions, Testing and Standards 1
triathlonx13 Leak test correlation - Bubble to Air Reliability Analysis - Predictions, Testing and Standards 8
S Performing PQ on a Small (tabletop) Air Heat Treating Oven ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
L Should Air Screwdrivers be Calibrated? General Measurement Device and Calibration Topics 15
N What does an effective design process look like? (shoots flare in the air) Design and Development of Products and Processes 2
R Measuring LiON Battery State of charge - Transporting batteries by Air RoHS, REACH, ELV, IMDS and Restricted Substances 1
R Air-powered dental handpiece with LED IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
A 61010-1 Accessible Parts - Limit Values and Crepage and Air Clearance Distances Other Medical Device Related Standards 1
somashekar Is it a good practice to have Air Conditioner in the Gym Hospitals, Clinics & other Health Care Providers 2
S Is 0.1 micron monitoring required for ISO Class 5 Laminar Air Flow unit ? Other ISO and International Standards and European Regulations 4
M Regulations for oxygen/air-tubing and connectors inside of ME equipment IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
A Setting air gauging outside of a part tolerance Capability, Accuracy and Stability - Processes, Machines, etc. 2
S Can Validation be done for fewer Air Changes than specified? Qualification and Validation (including 21 CFR Part 11) 6
Marc Air Pollution in the Early 21st Century Coffee Break and Water Cooler Discussions 5
C SOP for Door to Door Air Cargo Document Control Systems, Procedures, Forms and Templates 3
S What are air changes are required for ISO Class 8 Clean Room? US Food and Drug Administration (FDA) 2
E Is Volumetric Air Sampling required for Class ISO 7 Cleanroom ? ISO 13485:2016 - Medical Device Quality Management Systems 1
B Searching for Naval Air Engineering Center test specification NAEC TP 83-1 Misc. Quality Assurance and Business Systems Related Topics 1
G Update Numerex Air Bearing CMM? Capability, Accuracy and Stability - Processes, Machines, etc. 6
kedarg6500 Should soft annealing of Copper be done using regular air or in an inert atmosphere ? Manufacturing and Related Processes 2
Jen Kirley Can a company with pending air license and water permit still get certified to 14001? REACH and RoHS Conversations 2
S How to determine the Air Clearance for Floated Secondary Circuit IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
N Is Air Burst test for oven treated condoms still required under ISO 4074? Other Medical Device Related Standards 1
R Creepage and air clearance under vacuum conditions IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
S Looking for Air Sampler Suggestions Manufacturing and Related Processes 4
S General Safety Question - Possibly fatal air embolisms caused by air hoses Human Factors and Ergonomics in Engineering 21
N PCB Creepage and Air Clearance on 8 Layer Boards IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
R How to calculate the Air Flow Rate in clause 201.12.4.4.105 of IEC 60601-2-16:2012 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
P Critical Limits for Air Blower as CCP (Critical Control Point) Food Safety - ISO 22000, HACCP (21 CFR 120) 6
AnaMariaVR2 24hr Worldwide Air Traffic Simulation Federal Aviation Administration (FAA) Standards and Requirements 0
S Air Line Devices Filters, Pressure Regulators, Lubricators Manufacturing and Related Processes 3
Similar threads


















































Top Bottom