Originally posted by T.P.NAMASIVAYAM:
1) CAN ANYBODY EXPLAIN ABOUT THE "CONTROL METHOD" MENTIONED IN THE CONTROL PLAN.
2) IF 100% INSPECTION IS CARRIED OUT FOR A CHARACTERISTICS WHAT SHOULD BE THE CONTROL METHOD?
There are really two types of control methods for control plans and
FMEA, prevention control and detection control.
Your 100% inspection would be a "detection" control method for your characteristic.
A type of preventive control method might be an auto detect and reset for tool wear.
ASD...
[This message has been edited by Al Dyer (edited 07 April 2001).]