Control of Monitoring and Measurment Manuals

M

mjohnson

#1
#1
Document Control...Monitoring and Measurment

Hello folks,

Any advice on whether or not it is necessary to "uniquely identify" each and every equipment manual for each piece of calibrated equipment as well as each piece of calibration test equipment? If all of the manufacturer manuals are marked controlled documents and kept in the same location is it overkill to split each one out individually?

Regards,

MCJ
 
SQCpack - Communicate Quality Metrics
Elsmar Forum Sponsor
Randy

Randy

Super Moderator
#2
#2
Can each manual be specifically linked to it's piece of equipment?

Could a guy named Murphy mistakenly try to perform an operation on a piece of equipment with a manual because the picture on the front kind of looks like the equipment itself?

Could that same guy named Murphy use the wrong calibration manual or equipment for the wrong item with out some type of guidance document/form or whatever?

It's your choice...do what you want, but remember, somewhere we have to perform "Preventive" actions that many times cost less than the "Corrective" ones.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
C Monitoring and Control Instruments RoHS, REACH, ELV, IMDS and Restricted Substances 3
E ISO 13485 7.6 Control of monitoring and measuring equipment - Assess the Validity ISO 13485:2016 - Medical Device Quality Management Systems 4
A Calibration Interval - AS9100 - Control of Monitoring and Measuring Equipment Calibration Frequency (Interval) 8
T IATF 16949 Control Plan and Process Monitoring Requirement(s) IATF 16949 - Automotive Quality Systems Standard 1
H ISO 9001:2008 Clause 7.6 Control of Monitoring and Measurement (Computer Software) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
D Does 7.6 Control of Monitoring and Measuring Equipment align with ISO 17025 ISO 17025 related Discussions 4
G Control of Monitoring and Measuring Equipment for Servicing Photocopiers ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
S ISO9001 Exclusion 7.6 Control of Monitoring and Measuring Equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
M Monitoring and Control of Utilities and Supplies (7.5.1) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
M 7.6 Control of Monitoring and Measuring Equipment - Monitoring vs. Measuring IATF 16949 - Automotive Quality Systems Standard 2
Q Monthly Data Review through Control Charts - Monitoring Complaints ISO 13485:2016 - Medical Device Quality Management Systems 3
N Medical Device External Standards Control and Monitoring Other US Medical Device Regulations 10
G 7.6 Control of Monitoring and Measuring Equipment vs. 7.6.1 Measurement Systems Analy IATF 16949 - Automotive Quality Systems Standard 15
P Control of Monitoring and Measurement Devices - ISO 13485 Clause 7.6 says ... ISO 13485:2016 - Medical Device Quality Management Systems 3
B Clarification on 7.6 Control of Monitoring and Measuring Devices Note AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
R Pest Control and Monitoring Required? ISO 13485:2016 - Medical Device Quality Management Systems 7
R Control of Monitoring & Measurement Equipment - ISO 9001:2008, Clause 7.6 c) General Measurement Device and Calibration Topics 9
M Effective Control of Monitoring and Measuring Devices - Unused Devices AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
J Compliance with ISO 9001 Clause 7.6 Control of Monitoring & Measuring Devices ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C Monitoring changes in ANSI standards - Control of External Documents Document Control Systems, Procedures, Forms and Templates 6
R Deciding what Processes need Control and Monitoring - 820.70 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
D Control of Measuring and Monitoring Instruments General Measurement Device and Calibration Topics 5
A Monitoring Out-of-control situations on X-bar and R chart Statistical Analysis Tools, Techniques and SPC 15
D Control of monitoring and measuring equipment - infrared thermometer for cross-check ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
R ISO 13485 Clause 7.6 Control of Monitoring and measuring devices - Requirements ISO 13485:2016 - Medical Device Quality Management Systems 10
W Computer Software - ISO 9001 Clause 7.6 Control of Monitoring and Measuring equipment ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
S Control of monitoring and measuring devices - Computer forensics company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
L Control of Monitoring and Measuring Devices - Clause 7.6 Exclusion? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
A Suggestions for: Control of Monitoring and Measuring Devices? (see 7.2.1) (1) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 33
D 7.5.1.1 - Controls vs. Methods for Monitoring of Control IATF 16949 - Automotive Quality Systems Standard 2
3 Calibration Frequency - Control of Monitoring and Measuring Devices - Clause 7.6 Calibration Frequency (Interval) 14
T Control of Monitoring Device - Workers (employees) eyes - Visual Inspection ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
R TS 16949 Clause 7.6 Control of Monitoring and Measuring Devices IATF 16949 - Automotive Quality Systems Standard 12
A Outsourcing Control of Monitoring and Measuring Devices ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A Control of Monitoring & Measuring Devices ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
R 7.6 Control of Monitoring and Measuring Devices IATF 16949 - Automotive Quality Systems Standard 2
M Calibrate Computers - ISO 9001 Clause 7.6. Control of Monitoring & Measuring Devices ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 43
R 7.6 Control of Monitoring and Measuring Devices in the Service Industry Service Industry Specific Topics 12
E Control of Monitoring and Measuring Device Software General Measurement Device and Calibration Topics 4
E What are monitoring devices? ISO 9001 Clause 7.6 - Control of ... monitoring devices ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M Process & Product Characteristic in Control Plan FMEA and Control Plans 0
D How to calculate the A4 constants in control charts? Statistical Analysis Tools, Techniques and SPC 0
Nihls Quality Control Card for CMM's Capability, Accuracy and Stability - Processes, Machines, etc. 0
M Change control on Tracking Sheet ISO 13485:2016 - Medical Device Quality Management Systems 11
K COPLANARITY: Composite profile tolerance on multiple surfaces- what does" lower dimensional reference frame tolerance" control? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
M Medical Device Marketing Material - Control of Social Media 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
M Does 4.5 - Alternative RISK CONTROL apply to the Particular Standards? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
H Control of Change i.e. process and WI IATF 16949 - Automotive Quality Systems Standard 9
Sonja D AIAG VDA PFMEA and Control Plan training FMEA and Control Plans 6
F Quality Control in Electrical Calibration ISO 17025 related Discussions 0

Similar threads

Top Bottom