Correspondence between ISO 14001:2015 & OHSAS 18001:2007

qcstar

Starting to get Involved
#1
Hello

My apologies if this is a repost. I searched and couldnt find any.

I'm looking for the mapping between ISO 14001:2015 & OHSAS 18001. Can anyone share matrix for the correspondence between the two. 18000.

Thanks in advance.
 
Elsmar Forum Sponsor

Sidney Vianna

Post Responsibly
Staff member
Admin
#2
I don't think you will find a direct correspondence table, but if you correlate the Annex A of OHSAS 18001:2007 wich contains the correspondence table between OHSAS 18001 and ISO 14001:2004 and Annex B of ISO 14001:2015, you can create an indirect correspondence table.

But, with OHSAS 18001 in the way out, this should be of limited time benefit.

Good luck.
 
Thread starter Similar threads Forum Replies Date
F Correspondence between ISO 9001:2000 and ISO 9001:1994 Standard ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
M Control Method correspondence between PFMEA and CP FMEA and Control Plans 8
A Document "Correspondence IATF 16949 vs ISO13485" available? IATF 16949 - Automotive Quality Systems Standard 0
T Internal Audit Training via Correspondence - Recommendations? Training - Internal, External, Online and Distance Learning 3
S Correspondence Baldrige criteria and 9001 processes Misc. Quality Assurance and Business Systems Related Topics 2
K Joint approval between OEM and Manufacturer on Design Documents ISO 13485:2016 - Medical Device Quality Management Systems 4
C Is my software an accessory? Telecommunication between HCP and patients EU Medical Device Regulations 10
K Verify Software Architecture - supporting interfaces between items IEC 62304 - Medical Device Software Life Cycle Processes 1
E ASTM F2118 - Fatigue testing of bone cement - Changes between the 2003 and the 2014? Other Medical Device Related Standards 1
A What is the difference between Design Process, Process Design and Design Control? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
R What's the major difference between Green Belt and Black Belt in term of training and project Six Sigma 3
DuncanGibbons How is the arrangement between Design and Production organisation envisaged? EASA and JAA Aviation Standards and Requirements 4
M Risk Analysis Flow - Confusion between ISO 14971 and IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 8
T Difference between a subcontractor and a supplier ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 21
K %GRR was between 10-30% so we have to have a "backup plan" per auditor IATF 16949 - Automotive Quality Systems Standard 15
H Difference between Stainless Steel 316 ASTM F899 and ASTM A276 Other Medical Device Related Standards 3
A Exact terms for a plating failure and difference between rejection rate and failure rate Manufacturing and Related Processes 9
S ISO 13485 Lead Auditor - Debate between our Quality Team and Regulatory Auditor - Internal Auditor Training ISO 13485:2016 - Medical Device Quality Management Systems 17
M Difference between MSA and MSE? General Measurement Device and Calibration Topics 1
gramps What is the difference between discrete and continuous variables? Problem Solving, Root Cause Fault and Failure Analysis 5
R Plea for advice on transitioning between Notified Bodies (label updates) Medical Device and FDA Regulations and Standards News 1
M Measuring FIM (TIR) - Two inside diameters - Conflicting readings between inspectors Manufacturing and Related Processes 1
JoCam Difference between Approval and Registration - ISO 13485:2016 ISO 13485:2016 - Medical Device Quality Management Systems 2
S Difference between EU-MDR Annex IX and the Annex-combo X&XI EU Medical Device Regulations 2
T ISO 17025:2017 Clause 4.2.2 - The difference between "be notified" and "be informed" ISO 17025 related Discussions 4
Jimmy123 What is the difference between Error Proofing and Controls? ISO/IATF 16949 - Control Plans FMEA and Control Plans 16
DuncanGibbons Clear differences between ISO 13485 and AS 9100D requirements ISO 13485:2016 - Medical Device Quality Management Systems 10
H What is different between PED certificate and CPR certificate? Manufacturing and Related Processes 2
B Angle between two surfaces Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
D Variation between Faro Arms Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
K Differences between Manufacturing Process Audit & Layered Process Audit Lean in Manufacturing and Service Industries 4
P Risk acceptability alignment between ISO 14971 and IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 6
C IEC 60601-1-8, difference between table 4 and annex D IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
D Reorganizing responsibilities between management teams and Employees in them ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
A Compatibility between MDD and MDR devices EU Medical Device Regulations 7
Q How should I analyze measurement correlation between me and customer? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
S Relationship between IEC 62304 problem resolution and ISO 13485 IEC 62304 - Medical Device Software Life Cycle Processes 8
A What is the difference between Basic UDI-DI and UDI-DI? EU Medical Device Regulations 6
T Something between a manual and a procedure? Document Control Systems, Procedures, Forms and Templates 9
Q What is the difference between AS9100D 9.3.2.f and 9.3.3.a AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
S Differences in CB expectations between the US and Europe Registrars and Notified Bodies 3
Ahang Separation between secondary circuit and accessible parts IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
M Aluminum - What is the difference between 6061-T6 and 6061-T651 (both per ASTM B211)? Manufacturing and Related Processes 4
G Comparing Gauge Blocks - Translating the calibration between the master set and the QA set General Measurement Device and Calibration Topics 2
R The alignments and contradiction in Quality Engineering and management between the Automotive and Aerospace industry AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
F IEC 62304 - Segregation and communication between software items IEC 62304 - Medical Device Software Life Cycle Processes 1
E Discussion between co-worker on tolerance and uncertainty and how to apply it. Thoughts? 17025 ISO 17025 related Discussions 1
L Comparison matrix between IATF 16949:2016 to ISO 12207, ISO 9001 and Automotive SPICE IATF 16949 - Automotive Quality Systems Standard 3
M Applicability of IEC 60950-1 Table K2 - Minimum clearances between circuits Various Other Specifications, Standards, and related Requirements 0
J Deciding between Professional Use or Lay Person IVD Test - Human fecal stool specimens Other Medical Device and Orthopedic Related Topics 1

Similar threads

Top Bottom