Cosmetic defects on chrome plating - Chrome plating visual standards

M

milspecrob

#1
I need some specifications/standards of cosmetic defects on chrome plating. My application is mostly for visual appeal.
 
Elsmar Forum Sponsor
M

milspecrob

#3
Re: Chrome plating visual standards

Thank you very much Stijloor, just the resource I was looking for
 
M

milspecrob

#5
Re: Chrome plating visual standards

Has anyone had any sucess at actualy finding the following documents from The Metal Finishing Suppliers' Association

Quality Metal Finishing Guides:

* Decorative Copper/ Nickel/Chromium and Substitutes

* Functional Chromium Plating (Hard Chrome)

They come up in a number of searches but even contacting MFSA has not been fruitfull for me.:bonk:
 

Jim Wynne

Leader
Admin
#6
Re: Chrome plating visual standards

Has anyone had any sucess at actualy finding the following documents from The Metal Finishing Suppliers' Association

Quality Metal Finishing Guides:

* Decorative Copper/ Nickel/Chromium and Substitutes

* Functional Chromium Plating (Hard Chrome)

They come up in a number of searches but even contacting MFSA has not been fruitfull for me.:bonk:
If you go to this web page you'll find a reproduction of a Chrysler standard for a decorative nickel finish intended to be used as an alternative to chrome--the appearance standards are the same.
 

Attachments

M

milspecrob

#7
Re: Chrome plating visual standards

Still looking for this
Has anyone had any sucess at actualy finding the following documents from The Metal Finishing Suppliers' Association

Quality Metal Finishing Guides:

* Decorative Copper/ Nickel/Chromium and Substitutes

* Functional Chromium Plating (Hard Chrome)

They come up in a number of searches but even contacting MFSA has not been fruitfull for me.
 
Thread starter Similar threads Forum Replies Date
M Safety assessment of cosmetic product EU Medical Device Regulations 1
M Cosmetic Shelf Life Testing Misc. Quality Assurance and Business Systems Related Topics 10
A Industry Standards for Cosmetic Inspection Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
A Regulatory requirements for electrical cosmetic appliances US Food and Drug Administration (FDA) 5
I Writing a Cosmetic Criteria for Switches Document Control Systems, Procedures, Forms and Templates 1
V Placement of cosmetic products on EU market as medical devices EU Medical Device Regulations 2
GoSpeedRacer Validation of Processes 7.5.6 - Do cosmetic welds need process validation? ISO 13485:2016 - Medical Device Quality Management Systems 3
E External Thread Cosmetic/Appearance Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
E Cosmetic Standard for Sheets of Extruded Plastic Manufacturing and Related Processes 1
P Cosmetic Inspection of Plastic Injection Molded Parts Manufacturing and Related Processes 5
A Stuck at 'Analyse' stage of DMAIC Improvement Cycle on Cosmetic Specification Manufacturing and Related Processes 10
Q Please suggest how to improve Cosmetic Visual Inspections Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
A Cosmetic Visual Inspection Specification Advantages Manufacturing and Related Processes 7
A Cosmetic Spec - Convincing Management Visual Inspection Standard is Necessary Manufacturing and Related Processes 5
R Regulatory Aspects of Co-Packaging Medical Device and Cosmetic Other Medical Device and Orthopedic Related Topics 6
M Human Factors Testing for CE Marking of a Cosmetic Device CE Marking (Conformité Européene) / CB Scheme 9
S Cosmetic Inspection (scratch, black dot, burr) Standard in Manufacturing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Do Cosmetic GMPs apply for Fragrance Manufacturer US Food and Drug Administration (FDA) 1
Roberticus Blacklight Cosmetic Inspections of Stainless Steel Parts ISO 13485:2016 - Medical Device Quality Management Systems 5
C Corrective Action and Preventive Action for Operator Error (Cosmetic - Handling) Preventive Action and Continuous Improvement 15
C MSA on Attribute Data - Can use Different Parts with Different Cosmetic Issues? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
S Medical Device or Cosmetic Device in Korea? Hand Held Wrinkle Reduction LED Light Other Medical Device Regulations World-Wide 1
S Medical Device or Cosmetic Device in Japan? Hand Held Wrinkle Reduction LED Light Japan Medical Device Regulations 3
M SOPs for a new Cosmetic Product Development Laboratory Calibration Frequency (Interval) 1
K Cosmetic Product Registration - South Korea Other Medical Device Regulations World-Wide 1
V Creating a Cosmetic Inspection Specification for Powder Coated Painted Finished Parts Manufacturing and Related Processes 7
H Business Process for Cosmetic Manufacturer ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
B Sterilize or Disinfect? Research Cosmetic Device Other Medical Device and Orthopedic Related Topics 4
P Plate Glass: Cosmetic Inspection for Scratches Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
R Eliminating Cosmetic Issues and Customer Complaints Problem Solving, Root Cause Fault and Failure Analysis 14
R Cleaning Validation Protocol in a Cosmetic company ISO 13485:2016 - Medical Device Quality Management Systems 13
Ajit Basrur Approximately $2 Million of Potentially Harmful "Cosmetic" Eye Product Seized US Food and Drug Administration (FDA) 0
Ajit Basrur Trending segregated for cosmetic and functional dppm? Automotive requirements Misc. Quality Assurance and Business Systems Related Topics 5
K Cosmetic Specifications - Seeking good example of a cosmetic inspection standard Manufacturing and Related Processes 2
L Corrective and Preventive Actions aligned to design related defects. After Work and Weekend Discussion Topics 5
Q Product Quality vs Product Defects Manufacturing and Related Processes 4
A % of defects on the whole batch based on result from inspection under AQL Level II Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
C Random defects vs systematic (designed in) errors or faults. Design and Development of Products and Processes 1
A AQL - How to count samples with defects for each defect class AQL - Acceptable Quality Level 17
B IATF 16949 Cl. 8.6.6 - Acceptance Criteria - Zero Defects Attribute Data Sampling IATF 16949 - Automotive Quality Systems Standard 2
J Validating a stopped test due to never finding any defects Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
Q PPM - Filtering Defects out of calculation Quality Tools, Improvement and Analysis 5
S Determining sample size for inspection to achieve x% confidence re defects Misc. Quality Assurance and Business Systems Related Topics 10
R Classification of Major & Minor Defects AQL - Acceptable Quality Level 10
S Understanding, Analysis and Monitoring Quality Defects on Composite Components Statistical Analysis Tools, Techniques and SPC 3
K Is there any specific Standard on visual defects for extrusion and machined parts ? Quality Tools, Improvement and Analysis 6
P What are the causes of painting defects? Manufacturing and Related Processes 2
T Repeated Inspection - Probability of Visual Inspection catching Defects Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T How many complaints, defects and non-conformances are typical? Customer Complaints 5
P Monitoring Production Defects - Three simple questions Six Sigma 3

Similar threads

Top Bottom