SBS - The best value in QMS software

Critical Limits for Air Blower as CCP (Critical Control Point)

P

patriot19472001

#1
Dear Food Professionals,

Good day. We have an air blower at start of process (1st step) for cleaning of glass jars. Glass jars passed through a specific ring (made of plastic and steel) in a way that its opening is in downside and it passed out through a sufficient air pressure. Now how can we define critical limits for Air Blower because no pressure guage is attached with Air blower to show its pressure even.

Thanks in Advance

Regards,

Ghulam Mustafa
 
Elsmar Forum Sponsor

somashekar

Staff member
Super Moderator
#3
Dear Food Professionals,

Good day. We have an air blower at start of process (1st step) for cleaning of glass jars. Glass jars passed through a specific ring (made of plastic and steel) in a way that its opening is in downside and it passed out through a sufficient air pressure. Now how can we define critical limits for Air Blower because no pressure guage is attached with Air blower to show its pressure even.

Thanks in Advance

Regards,

Ghulam Mustafa
If your blower RPM is constant and the air intake draft is clean and filters maintained well, you can expect a constant CFM.
Your blower RPM can be the critical control.
Does this make sense to you ?
 
P

patriot19472001

#4
Dear Associate,

Please elaborate that what is Constant CFM? and If we take RPM as critical limit then how RPM can be checked? How verification and even validation can be evidenced?

Thanks!

Ghulam Mustafa
 

somashekar

Staff member
Super Moderator
#5
Dear Associate,

Please elaborate that what is Constant CFM? and If we take RPM as critical limit then how RPM can be checked? How verification and even validation can be evidenced?

Thanks!

Ghulam Mustafa
The volume of air delivered in Cubic Feet / Minute will be constant and rated per the blower label detail, when the inputs are again as per the blower label details that will be on the blower equipment. The electrical inputs to the blower equipment can be checked and monitored.
You must validate your cleaning quality required and maintain blower equipment and filters in order, which are the determined constants of your process.
 
P

patriot19472001

#6
Thank You so much Dear. Its really working with me.

Thanks a lot again.

Regards,

Ghulam Mustafa
 

somashekar

Staff member
Super Moderator
#7
Thank You so much Dear. Its really working with me.

Thanks a lot again.

Regards,

Ghulam Mustafa
I am happy if this is working for you Ghulam Mustafa. Please come back for anything on this, as well as anything else, from which we all can share and learn from each other.
Regards and wish you well ...
 
Thread starter Similar threads Forum Replies Date
M Critical Limits for CCP in a food storage warehouse Food Safety - ISO 22000, HACCP (21 CFR 120) 4
B Critical Action Limits (CAL) for All Internal and External Audit Findings General Auditing Discussions 17
S Critical Limits for Hand Washing Food Safety - ISO 22000, HACCP (21 CFR 120) 13
B Software service provider as critical supplier ISO 13485:2016 - Medical Device Quality Management Systems 4
M Critical Characteristics APQP and PPAP 1
B FCA US Customer Specific IATF 16949- Critical Characteristics 8.6.2 Customer and Company Specific Requirements 0
B ISO 11607-2 "Critical Parameter" vs. "Process Parameter" Other Medical Device Related Standards 6
T ISO 13485 - Process validation at critical suppliers ISO 13485:2016 - Medical Device Quality Management Systems 7
Jane's Like-for-like critical raw material change qualification - type of testing/ number of lots required ISO 13485:2016 - Medical Device Quality Management Systems 4
F Is there such a thing as 'Critical supplier' status under the Dept. of Health (UK)? Medical Device and FDA Regulations and Standards News 2
D Definition of "Critical Laboratory Equipment"? General Measurement Device and Calibration Topics 1
M Changing supplier of critical raw material (III class device) Other Medical Device and Orthopedic Related Topics 1
C Critical Suppliers for EU medical device approvals May 2020 EU Medical Device Regulations 1
M Informational Critical Thinking and the Process of Evidence-Based Practice Medical Device and FDA Regulations and Standards News 0
J How to measure a Critical Characteristic that is a Basic Dimension Misc. Quality Assurance and Business Systems Related Topics 6
O Examples of Critical process parameter (CPP) and Critical quality attribute (CQA) Manufacturing and Related Processes 2
R Critical suppliers (Definition of) and MDSAP (Medical Device Single Audit Program) ISO 13485:2016 - Medical Device Quality Management Systems 15
C Suppliers re-classification from Critical to Significant or from Significant to Non-critical Supply Chain Security Management Systems 0
H Critical Supplier Agreement acc. to NBOG 2010-1 Annex II EU Medical Device Regulations 5
andika_untoro What are a good Critical to Quality (CTQ) metrics for a biotech manufacturing production? Lean in Manufacturing and Service Industries 0
A API Q1 9th ed Addendum 2 - Vendor Assessment for critical products Oil and Gas Industry Standards and Regulations 18
M Does a CDR (Critical Design Review) have to have a moderator that is unconnected to the team? Design and Development of Products and Processes 4
S Critical supplier - Obligated to have an ISO-certified QMS? ISO 13485:2016 - Medical Device Quality Management Systems 8
A Critical Supplier/Quality Agreement Procedure ISO 13485:2016 - Medical Device Quality Management Systems 8
C AS9100 8.3.5.e Design and Development Outputs - Key Characteristics / Critical Items AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
J What level PPAP for 5 critical parts? APQP and PPAP 8
C Partial Design Validation and changes to a critical supplier 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
D Determining Critical Components for conformity with IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 21
S Financial status of critical vendor IEC 27001 - Information Security Management Systems (ISMS) 7
Ajit Basrur CDRH Premarket Approval Application Critical to Quality Pilot Program US Food and Drug Administration (FDA) 0
M IATF 16949 - Capability study on non critical dimensions? Statistical Analysis Tools, Techniques and SPC 4
Q Is a Domain Registrar a Critical Supplier? ISO 13485:2016 - Medical Device Quality Management Systems 11
S Who compiles the Critical Component List, Insulation Diagram etc.? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
F Medical Device HACCP (Hazard Analysis and Critical Control Point) Risk Management ISO 14971 - Medical Device Risk Management 2
T Validation Plan for a new Class II Medical Device (Critical Care Medical Ventilator) IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
R How to Train Staff for Critical Thinking Misc. Quality Assurance and Business Systems Related Topics 3
M Are Critical Business Processes Assets that need to be included in Asset Inventory? IEC 27001 - Information Security Management Systems (ISMS) 1
C The difference between a Critical Dimension vs. Critical Characteristic Misc. Quality Assurance and Business Systems Related Topics 2
MDD_QNA What is the function of the Critical Component List? ISO 14971 - Medical Device Risk Management 2
C What is considered a "Critical" Raw Material? (Re: DNA Synthesis) Misc. Quality Assurance and Business Systems Related Topics 3
M Notified Body (NB) Audits of Sub-Contractors and Critical Suppliers EU Medical Device Regulations 35
H Definition of a Critical Process EU Medical Device Regulations 9
Q Critical Supplier's Senior Management Changes Supplier Quality Assurance and other Supplier Issues 4
M Justification for Not Having a Validation Plan for a Critical Process ISO 13485:2016 - Medical Device Quality Management Systems 4
P TSO Parts and Critical Components EASA and JAA Aviation Standards and Requirements 2
N VDA 1 Critical Characteristics Requirements Help needed VDA Standards - Germany's Automotive Standards 6
A Critical Suppliers which will not allow us to audit them Oil and Gas Industry Standards and Regulations 11
T AS9003 7.4.3 Critical Raw Material Verification Advice AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
M GD&T - Specific Tolerance Requirement vs. Critical Item vs. Key Characteristic Manufacturing and Related Processes 3
P The correct way to do a Linearity and Stability Study on a Critical Dimension Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8

Similar threads

Top Bottom