Customer PPAP notification and submission for a Change

S

Squeeze

#1
Hi,
I'm an italian student! I have a doubt about PPAP notification! The organization before implementing a change has to notify this to the customer. After customer's approval, the supplier can implement the change. After the change was implemented a new PPAP submission is required.
So, after all, I have to do the submission for both instances of Table 3.1 (notification to customer) and Table 3.2 (submission to customer) of the PPAP manual! Right?
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Re: PPAP notification and submission

Hi,
I'm an italian student! I have a doubt about PPAP notification! The organization before implementing a change has to notify this to the customer. After customer's approval, the supplier can implement the change. After the change was implemented a new PPAP submission is required.
So, after all, I have to do the submission for both instances of Table 3.1 (notification to customer) and Table 3.2 (submission to customer) of the PPAP manual! Right?
Read the last sentence of paragraph 3.1 Customer Notification.

It says:....PPAP submission is required unless otherwise specified.

Emphasis mine. So the customer has to make the call if submission is required. Careful language is used....

Hope this helps.

Stijloor.
 
Thread starter Similar threads Forum Replies Date
Stijloor GM (Supplier) and PPAP Requirement 3.1 Customer Notification APQP and PPAP 5
R PPAP customer notification - what do you think? APQP and PPAP 12
M Customer Notification Rules under PPAP 3.1 APQP and PPAP 2
R Engineering changes for customer notification - PPAP Submission APQP and PPAP 5
S Customer Notification/PPAP when Changing Raw Material Suppliers Supplier Quality Assurance and other Supplier Issues 6
D Packaging Changes & PPAP and Customer Notification APQP and PPAP 2
Pau Calvo PPAP customer requirements in the APQP APQP and PPAP 22
L Reasons to submit a new PPAP or notify the customer APQP and PPAP 3
P Automotive Customer asking PPAP for catalogue parts IATF 16949 - Automotive Quality Systems Standard 16
P Customer wants a Part Material Change - New PPAP required? APQP and PPAP 3
G Customer wants PPAP on Old Parts to New Standards APQP and PPAP 8
N Customer wants a PPAP/PSW on some Prototype Parts APQP and PPAP 6
B Should I Request/Submit a PPAP from/to a Supplier/Customer for only Repackaging Parts APQP and PPAP 7
T PPAP - Complaint from a Tier One customer concerning Product Dimension IATF 16949 - Automotive Quality Systems Standard 26
Y Customer Specific PPAP Level 3/4 Requirements - Fastener Manufacturer APQP and PPAP 2
T Customer requires Internal Specification to be met on PPAP APQP and PPAP 7
J Customer Complaint - PPAP - Issues not called out on the print APQP and PPAP 3
V Submitting Supplier Information in Customer PPAP APQP and PPAP 2
C AS9100 Customer requiring PPAP APQP and PPAP 3
W PPAP MSA for each new customer IATF 16949 - Automotive Quality Systems Standard 9
S Guidance to prepare and submit a Level 3 PPAP to a Customer APQP and PPAP 6
V PPAP to Customer with Deviation Request APQP and PPAP 4
K Looking for Ideas to Track Customer Requests and PPAP Data Packages APQP and PPAP 4
J Customer PPAP Approvals - Internal PPAP Possible? APQP and PPAP 7
V We put Old plating spec on supplier prints and need to PPAP to Customer. APQP and PPAP 1
V Can't PPAP to Customer because a Supplier was Re-Sourced APQP and PPAP 2
R Customer using their own version of the AIAG PPAP Forms APQP and PPAP 5
E PPAP PSW Approval: Customer Drawing or Supplier Drawing APQP and PPAP 4
I Repair and Service Facility - Customer wants PPAP for Refurbished Equipment APQP and PPAP 3
P ISIR vs. PPAP - Customer is requesting an ISIR Cover Sheet according VDA Quality Manager and Management Related Issues 5
Mr.Happy PPAP including FAI Parts - Customer is requiring 5000 measurements APQP and PPAP 15
S Can PPAP be submitted when not all customer requirements can be met? APQP and PPAP 5
B Cost for PPAP - Customer pays for samples and PPAP documentation from supplier APQP and PPAP 8
D Outsourced Material - Customer who is asking us for a level 3 PPAP APQP and PPAP 8
S PPAP for VW QPN - PPAP documentation for Volkswagon customer APQP and PPAP 4
P PPAP Approval - Customer approval of PSW (part submission warrant) APQP and PPAP 5
H How to refuse PPAP submission to a customer? APQP and PPAP 7
P PPAP submission for a new customer of an existing product APQP and PPAP 7
M PPAP Review Updated yearly but not send to Customer - Is it Right? APQP and PPAP 12
H Requirements in TS for PPAP - Full PPAP or as per Customer Requirement? IATF 16949 - Automotive Quality Systems Standard 14
M How can I say no to a customer PPAP request APQP and PPAP 14
D Level 3 PPAP for Customer - We are outsourcing the processing FMEA and Control Plans 6
5 PPAP Request from our Customer for an Assembly we Purchase APQP and PPAP 9
S Supplier requesting Customer PPAP submission APQP and PPAP 5
kedarg6500 PPAP for Continuous Process like Copper Wire Enameling but SWG differs per customer APQP and PPAP 3
K PPAP per QS-9000, rev.4 - Customer rejected our normal PPAP APQP and PPAP 3
S PPAP on Prototype tooling? Producing components for internal customer (assembly) APQP and PPAP 5
C Notice Received from Customer Regarding PPAP's & FAIR's APQP and PPAP 8
T Do They Submit PPAP with a Uniform PSW from Customer? APQP and PPAP 7
R Changing Suppliers - Customer (GM) PPAP required? APQP and PPAP 6
Similar threads


















































Top Bottom