SBS - The Best Value in QMS software

Customer, Sales and MFG contracts review

G

Greg Maggard

#1
Slaes contracts involving Customer, Sales Department and the Factory.

Is there any information on how these areas come together?:vfunny:

I am looking for a way to bridge all three into a 4.1, 4.2 and 4.3 document structure. Sales seems to be on the side of the customer not their own company. The tail is wagging the dog!

Any one have a suggestion or information I can look at?:frust:

I love this stuff:vfunny:
 
Elsmar Forum Sponsor

E Wall

Just Me!
Super Moderator
#2
Unless I'm misunderstanding you, this is a challenge to deal with but the guidelines are in place (IMHO):

Once the Top Management identifies the overall companies goals and objectives each level/dept/layer (sub whatever is accurate for your company) should look at their processes and ensure they have systems in place to meet/match company goals/objectives and put in place metrics to measure with and against for continual improvement.

Each dept/level/layer should be supporting the one above (who is their internal customer) while performing it's key functions. I would have to opinion (based on your very short post) that sales is NOT meeting the companies goals/objectives and major changes are needed. Responsibilities and Authorities are only words unless they are used!

Good luck!
 
Thread starter Similar threads Forum Replies Date
S Handling Cost of Sales requests for Customer Quality Manager and Management Related Issues 2
S Customer Corrective Action requests and Sales Employees Promises AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
E Marketing and Sales involvement in 8.2.1 Customer Satisfaction ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
N Customer Service/Inside Sales Will Not Leave Us (Quality Assurance) Alone! Document Control Systems, Procedures, Forms and Templates 3
S Value Stream Mapping (VSM) in After Sales Customer Support Service Department Lean in Manufacturing and Service Industries 4
S Customers an Extension of the Sales Force? Customer Specific Marketing Material Quality Manager and Management Related Issues 3
S Customer Service and Sales Departmental Procedure Document Control Systems, Procedures, Forms and Templates 4
H Lean Office and Office Layout - Sales, customer service, marketing, accounting, HR Lean in Manufacturing and Service Industries 4
6 Non-conformance for Sales Department - Communication with Customer Customer Complaints 10
P Customer Supplied Property - System breakdowns at every level including sales ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
P Can we standardise our reporting of Customer Complaints to a % of sales? Customer Complaints 10
A Customer Satisfaction - Whose responsibility? Sales Manager? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
G Post Sales Customer Feedback - A COP (Customer Oriented Process)? IATF 16949 - Automotive Quality Systems Standard 13
briteme4 Customer Requests FAI on Tooling Fixture AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
D Suggestions for Ishikawa for hyperdetailed customer - plastic molding automotive parts Nonconformance and Corrective Action 9
J WAIVED ON Q1 - We Don't have to comply with FORDS customer specific requirements IATF 16949 - Automotive Quality Systems Standard 3
A Customer Approval (Medical Devices) Document Control Systems, Procedures, Forms and Templates 4
M Reduce occurrence rating based on the PMS data and customer complaint data ISO 14971 - Medical Device Risk Management 2
M IATF16949 Clause 9.1.2.1e - Customer notification related IATF 16949 - Automotive Quality Systems Standard 4
G Too many customer complaints Customer Complaints 16
lanley liao Does the customer`s trademark belong to customer-supplied property? Oil and Gas Industry Standards and Regulations 2
J Customer Complaint & SCAR, false data Nonconformance and Corrective Action 14
S Annual Inspection Layout - Based on Customer print ? IATF 16949 - Automotive Quality Systems Standard 8
G Risk of stopping your customer's line IATF 16949 - Automotive Quality Systems Standard 4
S Calibration/Verification of customer fixtures IATF 16949 - Automotive Quality Systems Standard 6
D CB and customer audits considered as internal audits? General Auditing Discussions 9
O Informational Ford Motor Company Customer Specific Requirements for IATF 16949:2016 - 08 Jan 2021 Customer and Company Specific Requirements 0
G Bad Parts cause Customer line stop IATF 16949 - Automotive Quality Systems Standard 13
O IATF 16949 News Ford Motors Customer Specific Requirements Update - Nov 2020 IATF 16949 - Automotive Quality Systems Standard 5
D Question regarding customer feedback process ISO 13485:2016 - Medical Device Quality Management Systems 3
D Change Approval Requirements - Does every change need formal customer approval? Design and Development of Products and Processes 17
B Retention Samples when Customer Leaves Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 1
M Email Template that go to a customer and then get returned to us for RMA/Warranty Document Control Systems, Procedures, Forms and Templates 1
B FCA US Customer Specific IATF 16949- Critical Characteristics 8.6.2 Customer and Company Specific Requirements 0
D ISO 13485 8.2.1 and 8.2.2 - Customer Feedback and Customer Complaints ISO 13485:2016 - Medical Device Quality Management Systems 5
J Customer Complaint Response 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
V Quality review Meeting with Customer for complaints we received Customer Complaints 6
D IATF16949 - Interpretation of Customer Requirements clauses IATF 16949 - Automotive Quality Systems Standard 3
S Obligation to accept customer audits? IATF 16949 - Automotive Quality Systems Standard 23
D IATF16949 7.5.3.2.1 Record Retention - Our Product or Customer Product? Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 1
S Customer Specific Requirements (CSR) not signed/approved IATF 16949 - Automotive Quality Systems Standard 17
B FCA US IATF 16949 Customer Requirements updates Customer and Company Specific Requirements 3
G Same parts but new customer - What will the auditor ask me? IATF 16949 - Automotive Quality Systems Standard 2
R Customer Satisfaction importance in companies with Government/Public Administration as main customer? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
G Self Assessment Audit from a new potential customer General Auditing Discussions 3
P Customer Corrective Action Requests in OASIS? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
Ooi Yew Jin Customer E audit preparation Quality Manager and Management Related Issues 2
qualprod Managing a "special" customer into the QMS? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
C Certificate of Conformance Form - COC for each customer a controlled document? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
R Who is the customer in the ISO/IEC 17025:2017? ISO 17025 related Discussions 1

Similar threads

Top Bottom