d/b/a doing business as and the FDA

#1
Hi Everyone,

Our company imports medical devices to the U.S. (medical gloves) and one of our initial importers has registered a "doing business as" for their corporation, which has no similarities to the company name.

Is this a problem?

Are there pitfalls?

I'm worried primarily about mislabeling and the changeover to the new packaging - but what else???

Thank you!

:thanx:
 
Elsmar Forum Sponsor

v9991

Trusted Information Resource
#2
Thread starter Similar threads Forum Replies Date
Wes Bucey Is FDA Approval Too Expensive? The Cost of Doing Business in the Medical Industry ISO 13485:2016 - Medical Device Quality Management Systems 12
R CMDCAS and dba's (Doing Business As) Canada Medical Device Regulations 2
J AS9100 Certification and the Cost of Doing Business AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
B Writing Corrective Action outside an audit - During the course of doing business ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Randy Unavailability (GONE), Doing Business (Making Bucks), etc...... Coffee Break and Water Cooler Discussions 115
M What to be careful about/focus on when doing a Technical File review EU Medical Device Regulations 4
K The correct way of doing a 2 Sample T test Reliability Analysis - Predictions, Testing and Standards 7
V CE Mark under MDD or IVDR - IVD company doing Virtual Manufacturing Other Medical Device Regulations World-Wide 3
Sidney Vianna Are the Accreditation Bodies doing their job? Keeping CB's accountable Registrars and Notified Bodies 0
GreatNate QMS in SharePoint - Is anyone doing this? Manufacturing and Related Processes 10
D Doing both a top-down and a bottom-up risk assessment - How to combine ISO 14971 - Medical Device Risk Management 6
D Do I need part variation while doing Destructive Variable Gage R&R MSA study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
A True purpose of doing EST (Electrical Safety Test) on medical device Other Medical Device Related Standards 3
Raffy What is the first step in doing PIA (Privacy Impact Assessment)? IEC 27001 - Information Security Management Systems (ISMS) 3
I AS9100D - Interview Request - I'm doing research Misc. Quality Assurance and Business Systems Related Topics 1
Q Doing an MSA on a Climatic Chamber Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
N Explanation - Quality means doing it right when no one is looking ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Sidney Vianna As a profession we, auditors, are not doing enough - Simon Feary speech Registrars and Notified Bodies 36
B Doing MSA Variables Data Study on Threads Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
D Are we doing enough to meet Identification and Traceability 7.5.3 Requirements? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
S Who is doing BGA cross sectional analysis in assembled PCBA in INDIA? Reliability Analysis - Predictions, Testing and Standards 1
G Thoughts on Audit Finding for not doing Gage R and R for Visual Inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
AnaMariaVR2 What the Internet is Doing to Our Brains Coffee Break and Water Cooler Discussions 5
J Doing a "yearly" mass calibration of gages over the weekend. Any advice? General Measurement Device and Calibration Topics 4
pammesue Root Cause for not doing Management Review ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
P Testing Standards - Regulatory agency doing Enforcement Testing of Medical Devices EU Medical Device Regulations 5
T DOE Multi level Taguchi - I am doing a Capstone Project Using Minitab Software 10
M Requirement to complete an MSA when doing Comparative Tests Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
G Dealing with Excessive Within-Part Variation when doing MSA and Cpk studies Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
M To find the Optimum Parameter Setting using Minitab (Doing DOEs) Using Minitab Software 18
O NET-INSPECT is it worth it? Small Machine Shop doing AS9100 Quality Manager and Management Related Issues 2
R First Pass Yield - Am I doing correct the First Pass Yield Metric Quality Tools, Improvement and Analysis 2
P Environmental Aspects and Impacts while doing Software Development ISO 14001:2015 Specific Discussions 6
L Must Calibration Labs have IEC 17025 before doing Calibration Jobs for Customers ISO 17025 related Discussions 13
F Regulatory Affairs Certification (RAC) April/May EU Exam - Anyone doing it? Professional Certifications and Degrees 10
D Is anyone familiar with doing a DVI (Dossier de Validation Industrielle) for Snecma AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
E Should FDA implement 3rd party (PMAs) reviews? What are the pros and cons of doing so Other US Medical Device Regulations 2
Q Methods for doing Production Process Risk Analysis ISO 14971 - Medical Device Risk Management 4
V Help doing 6sigma Green Belt Professional Certifications and Degrees 6
Anerol C What activities are you doing daily as QMS Coordinator? Career and Occupation Discussions 3
C Setting Up Part Masters in ERP Systems - How are others doing it? Document Control Systems, Procedures, Forms and Templates 1
C Handling Repeated Non-Conformities when doing Layered Process Audits Process Audits and Layered Process Audits 11
A MR (Management Representative) also doing Internal Audits? Internal Auditing 27
J Registrars Doing Synchronized (Combined) Audits to AS9100 and ISO 13485 Registrars and Notified Bodies 8
C Volkswagen Quality System - Is Volkswagen doing anything different? Customer and Company Specific Requirements 1
Marc What are Toyota's idled U.S. workers doing? World News 4
M FOC (3 lots) - First of Code - Are you still doing 3 lots for FOC? Other Medical Device and Orthopedic Related Topics 1
D Greening of Standard Specifications - What is your company/ organization doing Sustainability, Green Initiatives and Ecology 10
S Please tell me how to start doing an FMEA FMEA and Control Plans 6
D Currently doing battle with IT - IT Help Desk procedure wanted Service Industry Specific Topics 5

Similar threads

Top Bottom