Defining Quality Objectives for Product Realization and Design and Development

G

Goldstarr

#1
Hi,

1. I'm in the process of defining Quality Objectives for Product Realization department and Design and Development department. Can Anyone suggest or share some Objective templates for the same.

2. How can we measure the Quality Process Effectiveness.Are they through Quality Objectives.

Thanks
 
Elsmar Forum Sponsor
S

ssz102

#2
too many examples:
the accuracy rate for product development;
the complished rate for ECN
scrap&re-work level for product

did the running process comply with the ISO standard and your company documents requirements according to audit results and findings
 

v9991

Trusted Information Resource
#3
1. I'm in the process of defining Quality Objectives for Product Realization department and Design and Development department. Can Anyone suggest or share some Objective templates for the same.
1) Quality by Design
2) Right first time
3) Customer delight (requirements, cost, )
4) others such as innovation - technology - cycle-time...

2. How can we measure the Quality Process Effectiveness.Are they through Quality Objectives.
1) Tracking of failures...(repeat reasons, sources, effects...)
2) Successfull verification & validation (no re-works)
3) tracking of respective customer-measures and customer-feedback.
4) respective targets for innovation 7 technology measures for identified/targetted products + appropriate time lines.
 
D

Deep Krothapalli

#4
In addition to the suggestions that were already made..
1. Number of Deviations in Qualification
2. Number of Design CTQs with guard bands (Dfx)
3. Number of Process CTQ with process capability greater than 1.33
 

SATHYABALARAMAN

Involved In Discussions
#5
1) Effectiveness Objective: First time right on new product development (No. of sample accepted / No. of samples produced)*100%
2) Efficiency objective: New product development lead time = No. of days taken to develop new product.
 

dsanabria

Quite Involved in Discussions
#6
Hi,

1. I'm in the process of defining Quality Objectives for Product Realization department and Design and Development department. Can Anyone suggest or share some Objective templates for the same.

2. How can we measure the Quality Process Effectiveness.Are they through Quality Objectives.

Thanks
Keep it simple...


Hi,

1. I'm in the process of defining Quality Objectives for Product Realization department

Thanks
Start with meeting the requirements of AS9100 Rev C - 8.4 Analysis of Data (as a minimum).

Hi,

1. I'm in the process of defining Quality Objectives for Design and Development department. Can Anyone suggest or share some Objective templates for the same.

Thanks
Try Chapter 3 on "Supply Chain Management Handbook (SCMH)" - IAQG Website.

https://www.sae.org/servlets/regist...MHGeneral&PAGE=getSCMHBOOK&vgenNum=63&scmhs=5
 
Thread starter Similar threads Forum Replies Date
G Quality Objectives - Where to start defining Quality Objectives? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
R Defining Department wise Quality Objectives in terms of Effectiveness and Efficiency ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
T Defining Quality Objectives for a Scaffolding Service company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
N Defining and Setting Quality Objectives for Each Organization Function and Level ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 15
S Defining a Quality System from scratch - Preferred system and documentation names Document Control Systems, Procedures, Forms and Templates 4
K Defining Acceptance Quality Level, I need clarity on AQL 1.5, 2.5, 4.0 AQL - Acceptable Quality Level 5
E Quality Techucuan (Technician) in Electronics - Defining Postion Requirements Career and Occupation Discussions 4
G Points to consider while defining the Quality Policy AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
N Where to begin defining and monitoring Quality Metrics in a Machine Shop Manufacturing and Related Processes 9
V Defining Quality Assurance's Role in R&D (Product and Process Development) Design and Development of Products and Processes 11
F Re-Defining Quality Contest - Thinking Outside of the QC Glossary Misc. Quality Assurance and Business Systems Related Topics 7
T Help needed for defining quality measurements for our quality report ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
Marc Cost Of Quality (COQ) Software - Defining "cost of quality" Quality Assurance and Compliance Software Tools and Solutions 2
K Defining risk control measures IEC 62304 - Medical Device Software Life Cycle Processes 14
A Defining a lower ESD test level in IEC 60601 safety test IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
J Defining staff competence - Small mechanical workshop Occupational Health & Safety Management Standards 20
D Question regarding ECO process, specifically for Life Science products and defining form fit and function ISO 13485:2016 - Medical Device Quality Management Systems 1
T Defining sampling plan for different AQL AQL - Acceptable Quality Level 3
M Defining frequency of measurement tools callibration Calibration and Metrology Software and Hardware 3
M Defining and Documenting Record Retention CE Marking (Conformité Européene) / CB Scheme 5
G Defining performance metrics for DFMA implementation Design and Development of Products and Processes 2
A Defining Expected Service Life in Risk Management File Reliability Analysis - Predictions, Testing and Standards 5
C Defining Approvals Required for Design Control Documents ISO 13485:2016 - Medical Device Quality Management Systems 6
M Defining the lifetime of orthopedic implants joints Other Medical Device and Orthopedic Related Topics 2
C AS9100 rev D 8.5.1 c 2 - Defining the Machine in-process frequency per ANSI/ASQ Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
V Defining Safety Precautions for Category 4,5 Molecules Occupational Health & Safety Management Standards 2
E European Regulations defining the terms Repair and Refurbish EU Medical Device Regulations 5
T Defining Major vs. Minor Changes to Procedures ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
GStough Adequately Defining Which Suppliers to Audit and Frequency Supplier Quality Assurance and other Supplier Issues 8
moritz Defining a good Scope for Critical SOPs ISO 13485:2016 - Medical Device Quality Management Systems 7
T Standards for defining audible alarms/warnings for OR instruments IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
M Defining Critical Vs. Non-Critical Suppliers/Service Providers (API Q1, 9th. Ed.) Oil and Gas Industry Standards and Regulations 2
B IEC 60601-2-24 - Defining Storage Volume IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
E Defining Sub-Disciplines for Chemical Testing Laboratory Employee Proficiency Testing General Measurement Device and Calibration Topics 1
T Defining Nonconformances in a Service Organization ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
M Defining Reliability and Confidence Levels Reliability Analysis - Predictions, Testing and Standards 8
J Defining Martial Arts and Gymnastics Statistical Techniques Statistical Analysis Tools, Techniques and SPC 4
V Defining the criteria for equipment to be qualified or requalified Qualification and Validation (including 21 CFR Part 11) 2
R Need help on defining scope for Design Verification File for Class III IVD 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
J Defining CCP (Critical Control Points) in a Rice Mill Plant Food Safety - ISO 22000, HACCP (21 CFR 120) 9
S Process Map and defining KPIs Misc. Quality Assurance and Business Systems Related Topics 5
5 Major Nonconformance for not "clearly" defining the "device lifetime" ISO 13485:2016 - Medical Device Quality Management Systems 2
E Defining the lifetime of an Implantable Medical Device Other Medical Device and Orthopedic Related Topics 5
B Defining Expected Oxygen Leakage for Safety Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
G Defining Post Mold Cure Ramp-Down Temperature Manufacturing and Related Processes 2
K Audit Nonconformity on Defining 'Outsourced' Infrastructure Maintenance Quality Manager and Management Related Issues 21
S Developing Documentation and Defining Processes as Subcontractor IATF 16949 - Automotive Quality Systems Standard 6
C Defining ISO 9001:2008 Scope for a Sterilization Company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
S Defining Skilled vs. Semi-Skilled vs. Unskilled Labor Manufacturing and Related Processes 1
I Defining the scope for ISO 9001 Registration - Software, Hardware and Customer Care ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3

Similar threads

Top Bottom