Deja postings - HELP!!

Geoff Cotton

Quite Involved in Discussions
#1
Folks don't flame me on this one but....

How can I post somthing to the old Deja Quality Forum?

Since its go to Google I can see postings being made but can't find out how its done.

Am I missing a trick somwhere.

Thanks

Geoff
 
Elsmar Forum Sponsor

Geoff Cotton

Quite Involved in Discussions
#3
Marc,

Did you post this in Deja quality forum or is it a different Marc Smith?
http://groups.google.com/groups?hl=en&lr=&group=misc.industry.quality&safe=off&ic=1&th=b60e0954a3af8ff8&seekd=905366855#905366855


Messages from the thread "QS9000-Semiconductor Supplement" Messages 1 - 1 of 1.

Message 1 in thread
From: Marc Smith
Subject: Re: QS9000-Semiconductor Supplement
Newsgroups: misc.industry.quality
Date: 2001-04-06 02:30:31 PST


On 4/6/01 1:44 AM in article
[email protected], Bill McCalla wrote :

It should add value. There are two documents I have, which may be outdated,
but one is titled QS-9000 Semiconductor Supplement and the other is Quality
System Assessment AEC-A100 QSA Semiconductor Edition.
My versions are copyrighted April 1995, so they predate the latest version
of QS-9000. Check with AIAG or the Automotive Electronics Council to see if
there are updated versions.

-Bill McCalla
KPMG Manager

"Willy Grunfeld" wrote in message
news:[email protected]
Does anyone know where can I get a copy of the Semiconductor Supplement to
QS9000?
Does it have any "added value"?
Thanx,
Willy Grunfeld

The semi-comductor supplement was updated in 1998 or 1999 I believe. The
AIAG sells it, just as it does all the QS-9000 books.

--
 

Marc

Fully vaccinated are you?
Leader
Admin
#4
Yup - I posted that. But it's just the standard news group. Google is just one of many 'outlets' like Supernews. I get the NG through my ISP.

I think of them as newsgroups (NGs), not as 'forums'. But that's semantics.

I know there are many ways to post, such as thru Deja (or you used to be able to). I use Outlook Express Macintosh and it has a built-in newsgroup reader.

[This message has been edited by Marc Smith (edited 12 April 2001).]
 
Thread starter Similar threads Forum Replies Date
B Official Journal Postings Summaries for Medical Devices EU Medical Device Regulations 16
Marc Foreign postings beckon to the young Immigration and Expatriate Topics 3
R First Time Managing Calibration and Measurement System. Need Help. General Measurement Device and Calibration Topics 11
M Can someone help me with this CMM programming question? Manufacturing and Related Processes 2
C Need help in determining applicable clause for an audit finding (based on AS9120B) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
M Attempting to Poke Yoke a wire crimping process...need help Design and Development of Products and Processes 3
marmotte Help with Surgical Class I + 510(k) exemption US Food and Drug Administration (FDA) 0
T Help with updating procedures ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
P Looking for help with an Ansys Workbench problem Manufacturing and Related Processes 0
C I need your help to find the action plan for these quality objectives Misc. Quality Assurance and Business Systems Related Topics 23
O New metal detector, ccp -help! Food Safety - ISO 22000, HACCP (21 CFR 120) 1
J PFMEA/control plan question- PLEASE HELP ! IATF 16949 - Automotive Quality Systems Standard 8
J Help needed on clauses identification ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
S HELP in setting-up QMS Quality Tools, Improvement and Analysis 4
R Need help on calibration result analysis Measurement Uncertainty (MU) 17
S Help in SMART goals AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
Vader22 IATF 16949 extended manufacturing site help IATF 16949 - Automotive Quality Systems Standard 4
G Need Help with Run @ Rate for Medical Devices ISO 13485:2016 - Medical Device Quality Management Systems 0
F Need help in IMS management review Management Review Meetings and related Processes 3
A Please Help With EOQ Calculation Manufacturing and Related Processes 2
S Help needed in choosing the method of calculating the minimum sample size Internal Auditing 12
D IATF 16949 Certification and Letter of Conformance expiry (Help!!!) IATF 16949 - Automotive Quality Systems Standard 8
S I need help in corrective action plan Nonconformance and Corrective Action 15
S Help in document control procedure Document Control Systems, Procedures, Forms and Templates 8
D Weird spec sheet - need help Measurement Uncertainty (MU) 3
Edward Reesor ISO 19223 Discussion (Help) Other Medical Device Related Standards 1
J Help to understand and response to API AAR during the re-certification audit Oil and Gas Industry Standards and Regulations 17
S NC and Deviation approach - please help Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 12
K Need Help With Auditing Suppliers Against ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 50
R Lead auditor scenario (Need help) is this non conforming to ISO13485 Manufacturing and Related Processes 2
J HELP NEEDED ! Risk Management Exercise ISO 14971 - Medical Device Risk Management 12
D Help Me. Non conformitty in External Audit IATF 16949 - Automotive Quality Systems Standard 13
U Need Help With API Q2 Quality Manual Oil and Gas Industry Standards and Regulations 8
A Nonconformity help IATF 16949 - Automotive Quality Systems Standard 5
J ISO 9001:2015 Clause 8.5.1 Control of Production and service provision - Help with Work Instruction Access ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
Azaarus Help with CAPA for an IATF finding regarding inspection documentation IATF 16949 - Automotive Quality Systems Standard 10
A Help needed with locating conector Design and Development of Products and Processes 0
Y CER: can "state of the art" help to make up for literature search on equivalant devices? EU Medical Device Regulations 1
D Need some Help on 8D fault tree analysis Problem Solving, Root Cause Fault and Failure Analysis 6
B Can someone help me explain P-Value with a simple word please? Capability, Accuracy and Stability - Processes, Machines, etc. 11
M Help on formulating a LP minimization problem Manufacturing and Related Processes 2
N Help with understanding Process Controls Manufacturing and Related Processes 7
K Screen printing ink and machine selection_ Need help Manufacturing and Related Processes 6
J Need Help with FPY Data in Assembly Process Manufacturing and Related Processes 7
S Need help on "Country of Origin" Medical Device and FDA Regulations and Standards News 0
M Need Help With Information Security Asset Risk Register IEC 27001 - Information Security Management Systems (ISMS) 2
T Help with BS EN ISO - IEC 80079-34 2020 (Explosive atmospheres QMS) Other ISO and International Standards and European Regulations 0
J Help settle a disagreement: Should external providers of preventive maintenance be on your ASL? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
N Help with basic understanding of Competence requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
C ISO/ IEC 17021 Resource requirement (need help) Document Control Systems, Procedures, Forms and Templates 5

Similar threads

Top Bottom