Delta or Partial FAI (First Article Inspection) - What are the differences?

D

dermotmcnamara

#1
#1
Can anyone help me with a definition for a Delta FAI and a Partial FAI or are they the same?
 
Highly Rated Gage Tracking - Learn More
Elsmar Forum Sponsor
Mikishots

Mikishots

Trusted Information Resource
#2
#2
dermotmcnamara said:
Can anyone help me with a definition for a Delta FAI and a Partial FAI or are they the same?
Click to expand...

I'd say that a Delta FAI is a type of Partial FAI.

Deltas are done when an isolated change to something is made; the FAI can be applied to the change only, if the remaining aspects of the part have been deemed to be unaffected.

A Partial FAI is just that - not a full FAI, either by agreement or method.
 
P

PaulJSmith

#3
#3
I agree with Mikishots. Also, a Delta can be generated when some of the characteristics of the original FAI are accepted, but some are not. You can sometimes create a Delta to cover only the remaining characteristics. This would be, of course, a kind of partial FAI. However, a partial FAI would not be a Delta if it is on its first time through.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
A Medical First Article - Can it be a Delta? ISO 13485:2016 - Medical Device Quality Management Systems 1
Geoff Cotton Performing a Delta Audit General Auditing Discussions 12
R AS9100 DELTA FAI - Sub-supplier for plating changed AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
A AS9102 Delta FAI Require after Rework stock item from stock AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
I Delta FAIR due to a Drawing Change AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
D Has anyone taken the AS9100 Delta course / exam? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 37
APHX02 AS9102 FAI Requirements that pertain to a Dimension 'delta' AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
M Delta FAIs on essentially unchanged drawings AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
F Can you reference original FAI (First Article Inspection) after Delta? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
Stijloor Delta Airlines declared the worst! Travel - Hotels, Motels, Planes and Trains 43
S The Delta Difference In Speed Coffee Break and Water Cooler Discussions 2
B Can somebody help me to show a 'delta-FMEA' example? FMEA and Control Plans 10
I How to provide Lower Flame limit (LFL) and Delta Hv(cal/g) Lean in Manufacturing and Service Industries 3
R Inverted Delta - What does an inverted delta on a print represent? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 24
J Definition of Special Characteristics Delta C and Delta S - Need for Customer Audit Capability, Accuracy and Stability - Processes, Machines, etc. 2
D Gage R&R on a delta measurement - Particle measurement count tool Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Marc Delta employee fired for blogging - Sues airline Career and Occupation Discussions 1
NDesouza Is my Partial FAI an Assembly or Detail? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
qualprod What do CB´s change when doing a partial moving ? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
Q Full or Partial FAI? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
D Partial FAI - AS9102 - One single drawing has 10 part numbers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
S IATF 16949 - Partial traceability of Aftermarket products IATF 16949 - Automotive Quality Systems Standard 5
B Temperature loop: partial calibration General Measurement Device and Calibration Topics 10
S CTS/CSE Waveforms Testing - Partial Recognition of IEC 60601-2-25 Standard by FDA IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
B AS9102 - Completing Partial FAI's for Baseline Part Numbers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
P AS9102 full FAl or a partial FAI after production inactivity period AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
D Non ASTM Partial Immersion LGT emergent stem correction General Measurement Device and Calibration Topics 3
C Partial Design Validation and changes to a critical supplier 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
Q Partial non applicability of ISO 9001 Cl. 7.1.5 (not having services)? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
J Use of Harmonised Standards (Full or Partial) ISO 13485:2016 - Medical Device Quality Management Systems 1
M Partial Implementation of ISO 9001 in a Company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
T Is a Removable Partial Denture classified as Class I Medical Device? EU Medical Device Regulations 6
M "Partial Design" Designation and Applicable ISO 9001:2015 Exemptions ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 13
S When to switch from a Partial AS9102 back to a Full AS9102 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
M Partial Compliance to an ISO Standard for Medical Device CE Marking EU Medical Device Regulations 13
K Partial FAI on Semi-Complete Parts question ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
N Can we do a Partial Gamma Validation on a Similar Product (Syringes) ISO 13485:2016 - Medical Device Quality Management Systems 6
M Partial Incoming (Receiving) Inspection Delivery Inspection. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
D Partial FAI form requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
D Partial ISO TS 16949 Certification IATF 16949 - Automotive Quality Systems Standard 14
A Classification of Medical Device with Partial Compliance with a particular standard IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
P Part 11 Hybrid System - Partial paper based record but with e-signature Qualification and Validation (including 21 CFR Part 11) 4
J AS9102 FAI (First Article Inspection) Full or Partial - Changes to NC programming Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
S Error Accumulation - Combined Result without going to Partial Derivitaves Capability, Accuracy and Stability - Processes, Machines, etc. 2
B Partial Joint (Hip Prosthesis) Replacement Class inquiry EU Medical Device Regulations 3
T Partial Shipping of Lots - Shipping of product prior to the lot being completed ISO 13485:2016 - Medical Device Quality Management Systems 4
I Partial Least Square Regression Result - Question Using Minitab Software 3
E Interpreting Partial Least Square Results Using Minitab Software 1
B Not Full (Partial) Lot at End of the Shift - Sample Size AQL - Acceptable Quality Level 4
S "Partial Buyout" Considerations for TS system - HELP IATF 16949 - Automotive Quality Systems Standard 13

Similar threads

Top Bottom